Owner's Manual

Add a User
3-13
Storage Server Settings
3
Add a User
Use this tab to add a new Viewer user. Also use it to
specify the kind of user (Administrator or Operator).
➀ [User Name]
Enter the name of the user to be added.
➁ [Password]
Enter the password used to log into the Viewer.
➂ [Confirm Password]
Enter the password again for confirmation.
➃ [User Group]
Select the user group (“Administrator” or “Operator”).
You can also select an added user group.
➄ [OK] and [Cancel]
Close the dialog box.
The added user appears in the list of users on the
[Users] tab.
Change the User Information
➀ [User Name]
All user names can be changed, except for the default
“administrator” user name.
➁ [Old Password]
Enter the old password.
➂ [New Password]
Enter the new password.
➃ [Confirm New Password]
Enter the new password again for confirmation.
➄ [User Group]
Select a user group (“Administrator” or “Operator”).
The default “administrator” user is associated with the
Administrator user group. You cannot change this user
name.
➅ [OK] and [Cancel]
Close the dialog box.
1
Click [Add] to display the [Add User] dialog box.
2
Enter the information required to add the user.
3
Click [OK] to close the dialog box.
➀
➁
➂
➃
➄
1
Select a user in the list.
2
Click [Edit] to display the [Edit User] dialog box.
3
Change the user information.
4
Click [OK] to close the dialog box.
➀
➁
➂
➃
➄
➅