Software Owner's manual

Operate the Camera
101
Day-to-Day Operations
6
 Use Pan/Tilt/Zoom from the Video Window
You can also use the pan/tilt/zoom feature from the video
window.
➀ Display area
Drag on the area to change the camera angle. Click on
the area to move the camera angle to that point.
➁ Zoom slider
Change the zoom position using the slider or [+]/[-].
Click [+] or drag the slider up to move toward the
telephoto position. Click [-] or drag the slider down to
move toward the wide-angle position.
Pan/tilt/zoom is unavailable.
Pan/tilt is unavailable.
Zoom is unavailable when the camera’s digital zoom is set
to [Disable].
Pan/tilt/zoom is unavailable if a fixed camera or an
external camera, such as the VC-C50i, is used.
Change the Camera Angle to a Preset
Position
You can select a preset camera angle in the [Camera
Control] dialog box after getting control of a camera.
Note
You must first configure the presets on the camera before using
this feature. For details, see the camera manual.
➀
➁