S800™ Color Bubble Jet™ Photo Printer User’s Guide
Canon S800 Color Bubble Jet Photo Printer User’s Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc. © 2001 Canon U.S.A., Inc. Disclaimer Canon U.S.A., Inc. has reviewed this manual thoroughly in order that it will be an easy to use guide to your Canon S800 Color Bubble Jet Photo Printer.
Contents Chapter 1: Basic Printing What Is a Printer Driver? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Selecting the S800 Photo Printer for Use . . . . . . . . . . . . . . . . . . . . 2 Printing Photographs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Using Specialty Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Cancelling a Print Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix Installing the Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Uninstalling the Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Registering Your Canon Product . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Regulatory Information . . . . . . . .
Chapter 1: Basic Printing Congratulations on purchasing your new Canon® S800 Color Bubble Jet™ Photo Printer! This chapter describes basic features of your S800 photo printer and provides instructions on how to set up and print documents and photographs.
Basic Printing Selecting the S800 Photo Printer for Use If the S800 is the only printer connected to your computer, it will automatically be used every time you print. However, if your computer has access to multiple printers, you can set the S800 as the default (main) printer. In Windows®, you can also select a printer for one-time use within an application. To set the S800 as the default printer in Windows®: 1. Click Start, Start then Settings, Settings then Printers. Printers 2.
Basic Printing Printing Photographs For highest quality results when printing digital photographs with your S800 photo printer, it is recommended that you use Canon Photo Paper Pro. See “Using Specialty Media” on page 4 for more information. To print photographs from a Windows application: 1. Load the printer with specialty media. See “Using Specialty Media” on page 4 for more on how to load various media types. 2. Open the digital photograph to be printed in a software application. 3.
Basic Printing Caring for your Photographs The Canon S800 photo printer will generate spectacular results for printing photographs, especially when used with Canon specialty media. All images are susceptible to fading over time, but proper care of prints made from your S800 photo printer will insure that print quality lasts long into the future. There are many environmental factors that impact how long a printout will last before noticeable image fading occurs.
Basic Printing Canon High Gloss Photo Film: A film sheet with a higher gloss than glossy photo paper. Use this media to obtain high quality reproduction of photo color. Use this media to reproduce photographic images of highly reflective surfaces like metal or glass. Canon Glossy Photo Paper: Covered with a glossy coating on the print side of the sheet to provide near-photographic quality with the gloss feel of a photographic print. This media is slightly heavier than Canon High Resolution Paper.
Basic Printing Canon Banner Paper: Allows you to print on up to six connected sheets of lettersize paper to create party or advertising banners. The banner paper is the same stock as Canon Bubble Jet Paper. For instructions on loading these creative media, see “Loading Media into the S800” on page 8 or see the S800 Reference Guide on the Setup Software & Reference Guide CD-ROM. Media to Avoid Never load the following types of media into your S800 photo printer.
Basic Printing Load Limit and Paper Thickness Lever Position Media Type Sheet Feeder Load Limit Paper Thickness Lever Position Plain paper 100 sheets (17 lb.
Basic Printing 3. In the driver, select the setting for thick paper. For Windows: a. From the software application File menu, select Print, Print then Properties. Properties b. On the Main tab, select Other Paper for the Media Type. c. When the message asks you to confirm your selection, click OK. OK For Mac OS: a. From the software application File menu, select Print. Print b. In the Print window, select Other Paper for the Media Type. c. When the message asks you to confirm your selection, click OK.
Basic Printing 3. Fan the edges of the sheets to remove static cling. Tap the edges of the stack against a flat surface so the stack is aligned. 4. With the whiter side facing up, align the stack with the right side of the sheet feeder. 5. Slide the paper guide right to the edge of the sheet. You can load up to 100 sheets of plain (17 lb.) paper or 80 sheets of High Resolution Paper in the sheet feeder at one time.
Basic Printing 5. With the glossy side facing up, place the sheet of Photo Paper Pro on top of the roller cleaning plate, align the sheet with the right side of the sheet feeder, then insert the sheet into the printer until it stops. 6. Slide the paper guide right to the edge of the sheet. Load only one sheet of Photo Paper Pro in the sheet feeder at a time. Handle media carefully by its edges. Never touch the print surface (the glossy side of the sheets).
Basic Printing To load Glossy Photo Paper: 1. Raise the paper thickness lever to the paper mark. 2. Slide the paper guide completely to the left. 3. Set the roller cleaning plate (provided with the printer) into the sheet feeder. 4. Align the roller cleaning plate with the right side of the sheet feeder. 5.
Basic Printing 4. Slide the paper guide right to the edge of the sheet. • You can load up to 20 sheets of Photo Paper Pro 4" x 6" or one Glossy Photo Card at a time with the loading support sheet. • Make sure that the loading support sheet is pointing down in the direction of the arrow.
Basic Printing To load envelopes: 1. Lower the paper thickness lever to the envelope mark. 2. Slide the paper feed guide completely to the left. 3. Press down on the corners and sides of the envelopes to make them as flat as possible by expelling all of the air in them. To avoid paper jams, make sure the envelops are flat before you load them into the sheet feeder. 4.
Basic Printing Cancelling a Print Job There are several ways to cancel a print job in progress: To cancel a print job using the printer buttons: After a print job has started, click the Resume button on the printer. The print job will be cancelled and the paper ejected. To cancel a print job using The BJ Print Monitor: You can use the BJ Backgrounder or BJ Print Monitor to cancel print jobs. See the S800 Reference Guide on the Setup Software & Reference Guide CD-ROM for more information.
Basic Printing Setting Driver Options The S800 printer driver can be customized to give you the best quality output. This topic describes the main options. For more options, see the S800 Reference Guide on the Setup Software & Reference Guide CD-ROM. Print Mode Your S800 photo printer offers the following modes of operation. Each mode adjusts the driver settings for the type of project you are printing: For Windows: Standard Use to print text documents.
Basic Printing • The Media Type will automatically change when you select a print mode, but you can select another media if desired. See “Using Specialty Media” on page 4 for a description of each media type. • You can adjust the Print Quality setting if needed. See the S800 Setup Software & Reference Guide on the CD-ROM for details. To set the print mode in Windows: 1. From an application File menu, click Print. Print 2. Make sure Canon S800 is the selected printer, then click Properties. Properties 3.
Basic Printing To change paper size and orientation in Windows: 1. From an application File menu, select Print. Print 2. Make sure Canon S800 is the selected printer, then click Properties. Properties 3. Click the Page Layout tab. 4. Select a paper size from the Page Size drop-down list. 5. Under Orientation, click Portrait or Landscape. Landscape The preview box displays the orientation selected. 6. Click OK.
Basic Printing 18
Chapter 2: Advanced Print Features This chapter provides information on how to use the S800 photo printer options to enhance printed color images.
Advanced Print Features 2. Make sure Canon S800 is the selected printer, then click Properties. Properties 3. From the Main tab, click Advanced. Advanced A Properties dialog will appear for the print mode selected. 4. From the Quality tab, click the Image Optimizer check box. 5. Click OK to close the print mode Properties window. 6. Click OK to close the S800 Properties window.
Advanced Print Features 5. If you want Photo Optimizer PRO to process the entire page, check Whole Page. Page If you want only the photo image optimized, leave this box unchecked. 6. Click OK to close the print mode Properties window. To optimize color photographs in Mac OS: 1. From an application File menu, select Print. Print 2. Click the Manual print mode icon, then Details. Details The Print Quality dialog box will open. 3. Check the Photo Optimizer PRO option. 4.
Advanced Print Features Adjusting Print Quality You can create a sharper image by specifying the printer add more dots of ink for the image. The finer the quality, the longer it takes to print a photograph. To adjust image quality in Windows: 1. From an application File menu, select Print. 2. Make sure that Canon S800 is the selected printer, then click Properties. Properties 3. On the Main tab, click Advanced. Advanced 4. On the Quality tab, slide the Print Quality slide bar to the Fine setting. 5.
Advanced Print Features Adjusting Color Balance, Brightness and Saturation You can enhance color printing by adjusting the color balance, output style (saturation) and brightness. For detailed information about these settings, see the S800 Reference Guide on the Setup Software & Reference Guide CD-ROM. To adjust color settings in Windows 1. From an application File menu, select Print. Print 2. Make sure that Canon S800 is the selected printer, then click Properties. Properties 3.
Advanced Print Features Saving and Recalling Driver Settings You can assign a name to a combination of driver settings and recall them for future use. To save driver settings in Windows: 1. From an application File menu, select Print. Print 2. Make sure Canon S800 is the selected printer, then click Properties. Properties 3. Make the changes desired, then click Advanced. Advanced 4. Click the Save tab, then type a name for your settings in the Title field. 5. Select an icon.
Advanced Print Features To recall driver settings in Mac OS: 1. From an application File menu, select Print. Print 2. Click Apply, Apply then select the name of your saved settings. 3. Click Defaults, Defaults then OK. OK 4. Click Import, Import then Close.
Advanced Print Features 26
Chapter 3: Printing Maintenance This chapter provides information on how to care for the ink delivery system for your Canon S800 photo printer. The following topics are addressed: • Monitoring Ink Levels • Replacing Ink Tanks • Aligning the Printhead • Printing a Nozzle Check Pattern • Cleaning the Printhead Monitoring Ink Levels The print driver contains a feature that enables you to monitor the level of ink in each ink tank. To monitor ink levels in Windows: 1.
Printing Maintenance 4. Click the Ink Information tab to view the levels of ink in each ink tank in your printer. A message will automatically appear in the S800 Print Monitor reminding you to replace the ink tank levels if you print an image when an ink tank level is low. To monitor ink levels in Mac OS: The S800 Print Monitor can display ink levels when they are running low if you have enabled background printing in the Choose option.
Printing Maintenance Aligning the Printhead Before using the printer, align the printhead to ensure the best quality printing. To align the printhead in Windows: 1. Add a sheet of blank paper in the sheet feeder. 2. Click Start, Start then Settings, Settings then Printers. Printers 3. Right-click the Canon S800 printer icon, then select Properties. Properties 4. From the Maintenance tab, click the Print Head Alignment button: 5. When prompted to print an alignment test page, click OK. 6.
Printing Maintenance 5. Click the Print Head Alignment button: 6. When prompted to print an alignment test page, click OK. 7. Compare the different patterns for each color on the printout. Notice that most patterns have vertical lines, but some in the middle look smooth and uniform. 8. For each color on the test printout, enter the number in the Print Head Alignment window that corresponds with the smoothest looking test pattern. 9. When finished, click Send.
Printing Maintenance To print a nozzle check pattern in Windows: 1. Make sure the printer is turned on. 2. Click Start, Start then Settings, Settings then Printers. Printers 3. Right-click the Canon S800 printer icon and select Properties. Properties 4. Click the Maintenance tab, then click the Nozzle Check Pattern button: The Maintenance tab button may vary for Windows NT® 4.0 and Windows 2000. 5. Read the messages, then click OK. OK The nozzle test pattern will print. 6. Check the nozzle check pattern.
Printing Maintenance 6. Check the nozzle check pattern. If part of the top pattern is missing, clean the printhead. See “Cleaning the Printhead” on page 32 for instructions. If the bottom pattern is streaked vertically with white, align the printhead. See “Aligning the Printhead” on page 29 for instructions. Cleaning the Printhead If your printed output appears faded, streaked or scratchy, the printheads may need to be cleaned.
Printing Maintenance 6. Print a nozzle check pattern to check the results of the printhead cleaning. See “Printing a Nozzle Check Pattern” on page 30 for instructions. 7. If there is no change after cleaning, check the amount of ink remaining. If an ink tank is empty, replace it. See “Monitoring Ink Levels” on page 27 for instructions on how to check ink tank levels. To clean the Printhead in Mac OS: 1. Make sure the printer is on. 2. In a software application, click File, File then Page Setup. Setup 3.
Printing Maintenance 34
Chapter 4: Troubleshooting Tips for Troubleshooting Troubleshooting usually falls into one of the following categories: Installation The printer driver will not install properly. Printer Hardware The printer is not working or not working as expected. Printed Output The printed output is not coming out as expected. Error Message You are getting an error message from the software (displayed on the screen) or the printer (indicated by blinking lights).
Troubleshooting Troubleshooting Installation Problem Cannot install the printer driver Possible Cause Try This Procedure not followed correctly See “Installing the Printer Driver” on page 53, or see the S800 Reference Guide on the Setup Software & Reference Guide CD-ROM for more information. Previous version of printer driver or same printer driver already installed on computer Always uninstall the previous version of the printer driver before installing the new version.
Troubleshooting Problem Cannot install the printer driver Possible Cause CD-ROM drive not working properly (continued) Try This Windows Use Windows Explorer to confirm that the CD-ROM is operating normally: 1. From the Desktop, double-click My Computer, Computer then CD-ROM. CD-ROM 2. If the files do not appear, refer to your Windows documentation for more information. Macintosh Open the Apple System Profiler, click Devices and Volumes, Volumes then open the CD-ROM.
Troubleshooting Problem Printer is not responding Possible Cause Try This Power cable is not securely connected Verify that the power cable is securely connected to the printer and plugged into a working outlet. Printer is not turned on, or is not ready Verify that the POWER light is on and glowing a steady green. If the light is off, press the POWER button. The green light will blink as the printer is warming up, then go to a steady (no blink) state when the printer is ready.
Troubleshooting Problem Printing is slow (continued) Possible Cause Computer resources are low; not enough disk space Try This When a print job is sent to the printer, it first goes to a temporary print spool. If the file is large and you have limited disk space available, this can slow or stop printing. Windows Delete all temporary files (.tmp). If you have Windows 98 or later, you can also run the Disk Cleanup utility: 1.
Troubleshooting Troubleshooting Printed Output Problem Printout and screen image colors appear different Possible Cause Try This Low ink Verify that you have sufficient ink in the ink tanks. See “Monitoring Ink Levels” on page 27. Printhead may need to be replaced Verify that the printhead is working properly. See “Printing a Nozzle Check Pattern” on page 30, and/or “Cleaning the Printhead” on page 32. If necessary, perform multiple printhead cleanings.
Troubleshooting Problem Smudged or smeared ink on paper Possible Cause Try This Printhead may need to be replaced Perform multiple printhead cleanings. See “Cleaning the Printhead” on page 32, or the S800 Reference Guide on the Setup Software & Reference Guide CD-ROM for more information. Media not loaded print-side up Check that your media is placed in the printer facing in the correct direction. See “Loading Media into the S800” on page 8.
Troubleshooting Problem Meaningless characters printed (continued) Possible Cause Try This Incorrect printer driver selected Check the Printer window to verify that the correct printer driver is selected. Bad (corrupted) file Create the document again and print it. If it prints successfully, the original file was corrupted. ECP mode not set Extended Capabilities (Parallel) Port, or ECP, provides faster data transfer between the computer and the printer.
Troubleshooting Problem Printer does not print (continued) Low ink alert displays in the BJ Print Monitor Possible Cause Try This 6 orange blinks (printhead not installed) Install the printhead. If already installed, remove it, then check the electrical contact area for any blockage or protective tape. Re-install it when done. See the S800 Reference Guide on the Setup Software & Reference Guide CD-ROM on the CD-ROM for procedures.
Troubleshooting Problem System error message displays Possible Cause System error occurred Try This If a system error occurs, printing stops. Windows A window displays the error message. System errors may include problems writing to LPT1 or USBPRN, application errors, or general protection faults. Make sure that the printer is turned on, the printer and computer are connected securely, and that the printer port is operating correctly.
Chapter 5: The BJ Solution Software– Downloading Images The BJ Solution software—a fun way to view, organize, adjust, and print images— includes ZoomBrowser EX and PhotoRecord (for Windows) and ImageBrowser (for Macintosh) and PhotoStitch (for Windows/Macintosh). Easy-to-use features include: • Move, copy, or delete images stored on computer disks. • Crop images and adjust colors with simple editing tools.
The BJ Solution Software — Downloading Images Minimum System Requirements Windows • Pentium 133 MHz, Windows 95/98 (32 MB RAM), Windows 2000/Windows NT 4.0 (64 MB RAM) Macintosh • Mac OS 8.1 or higher, 20 MB RAM Installing the BJ Solution Software To Install the BJ Solution Software in Windows: Driver features and screen shots described in this chapter, reflect Windows 98 and may be different for Windows 2000/Windows NT 4.0 users. 1. Close any open software applications. 2.
The BJ Solution Software — Downloading Images 4. Select the destination folder, then click Choose. Follow the on-screen instructions. 5. When the Installation Has Finished dialog box appears, click OK. Accessing the Online Manual The BJ Solution CD includes an electronic manual that is viewable with Adobe® Acrobat Reader 4.0. Follow the instructions below to install Acrobat Reader, which will enable you to view or print the BJ Solution Disk User’s Manual. To install Adobe Acrobat Reader in Windows: 1.
The BJ Solution Software — Downloading Images Windows Users: Using Your Software In this section you’ll learn how to: • Start ZoomBrowser EX • Print on Canon Photo Paper Pro • Merge photos to create a panoramic view Starting ZoomBrowser EX To Start ZoomBrowser EX: 1. Make sure the images are on your hard drive or other accessible media. 2. Double-click the Canon ZoomBrowser EX icon on the desktop to start the program.
The BJ Solution Software — Downloading Images 2. From the PhotoRecord window, you can drag images to change the layout, input descriptive text or captions, or add images. 3. Click Album Settings. The Album Settings dialog box will appear. 4. Make sure the Canon S800 is the selected printer. 5. Under Album Type, select Canon perforated paper printing. Canon Photo Paper Pro 4 x 6 will become the default media. The results will preview, click OK. 6.
The BJ Solution Software — Downloading Images Windows Users: Uninstalling the BJ Solution Software To uninstall the BJ Solution Software in Windows: • Click Start, Programs. Click Canon Utilities, ZoomBrowser EX, then ZoomBrowser Uninstall, and follow the on-screen instructions. • Click Start, Programs. Click Canon Utilities, PhotoStitch, then PhotoStitch Uninstall, and follow the on-screen instructions.
The BJ Solution Software — Downloading Images Printing on Canon Photo Paper Pro To print on Canon Photo Paper Pro: 1. Select the images you desire to print, then click Print Layout. The selected images will display automatically. 2. From the Browser window, you can drag images to change the layout, input descriptive text or captions, or add images. 3. Click Layout Options in the Print window. The Layout Options dialog box will open. 4. Under Layout Type, select Canon perforated paper.
The BJ Solution Software — Downloading Images When using Canon Photo Paper Pro 4 x 6, insert the sheets in the direction shown and print on the glossier side. When finished, remove perforated edges. The results look just like a photograph. Remember, when handling specialty media papers, always follow the instructions included with the media for the best printing results. See “Using Specialty Media” on page 4 for a list of other fun-to-use Canon Specialty Papers.
Appendix The following topics are included in this appendix: • Installing the Printer Driver • Uninstalling the Printer Driver • Registering Your Canon Product • System Requirements • Safety Information • Regulatory Information • Product Specifications • Limited Warranty—U.S. Only Installing the Printer Driver To install the printer driver in Windows: For Windows 2000 or Windows NT 4.0, refer to the README.TXT file on the S800 Setup Software & Reference Guide CD-ROM. 1.
Appendix • If the setup program does not run automatically, click Start, then Run, then type x:\msetup.exe (where x is the CD-ROM drive). • If prompted, select a language, then click OK. 3. Read the release notes, then click Next. Next 4. Read the License Agreement, then click Yes. 5. When the main menu appears, click Install Software. If a message prompts you to restart Windows, remove the CD-ROM, then click OK. After the computer restarts, re-insert the CD-ROM and continue. 6.
Appendix 2. Close any open software applications. 3. Insert the S800 Setup Software & Reference Guide CD-ROM in the CD-ROM drive. 4. Open the printer driver folder on the CD-ROM, then select the English folder. 5. Double-click the Installer icon. 6. Read the License Agreement, then click Accept. 7. Click Install. The the printer driver will load automatically. If a “No other applications can be running...” message displays, click Continue. 8. When the installation has completed, click Restart. 9.
Appendix 3. Double-click Installer in the English folder. 4. Read the License Agreement, then click Accept. Accept 5. Select Uninstall from the drop-down list. 6. Click Uninstall. Registering Your Canon Product To register your Canon product in Windows: 1. Insert the S800 Setup Software & Reference Guide CD-ROM in the CD-ROM drive. 2. When the Canon installation screen launches, click Install Software. 3. Click Utilities/Product Registration. 4.
Appendix Windows NT 4.0: Pentium processor; 16 MB RAM; 25 MB free hard disk space Macintosh: OS 8.1 or later; USB port; 10 MB RAM; 30 MB free hard disk space If you have an iMac with Mac OS 8.1, you must upgrade the OS before installing the printer driver. iMac Update 1.0 is available by download from www.apple.com. If you have multiple users set up in OS 9, log in as the Owner before downloading and installing.
Appendix • Set up and use the printer in a location where ambient temperature is within 41°F–95°F (5°C–35°C) and 10%–90% humidity with no condensation. Never place the printer on a thick carpet or rug. Fibers or dust entering the printer could cause a fire. Keep the power outlet for the printer free of all obstacles so you can unplug the power cord at any time. Such obstacles could prevent you from unplugging the printer when a printer fault occurs and cause a fire or electric shock.
Appendix • Always grasp the plug when you unplug the power cord. Pulling on the power cord could damage the cord and cause a fire or electric shock. Never use an extension cord. To avoid a fire or electric shock, always plug the power cord directly into the power outlet. Never use a power supply voltage other than that supplied in the country where you purchased the printer. Using incorrect voltage could cause a fire or electric shock. The correct power supply voltage for this printer is AC 120V, 60 Hz.
Appendix If any foreign object, especially a piece of metal or liquid, falls into the printer, immediately press the POWER button to turn off the printer, unplug the power cord, then call the Customer Care Center. Continuing to use the printer after a foreign object has fallen into it could cause a fire or electric shock. Printhead and Ink Tanks For safety, always store printhead and ink tanks out of the reach of small children.
Appendix instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.
Appendix Product Specifications Printing method: Printing resolution: Print speed: Bubble Jet ink on-demand 2400 x 1200 dpi (Printing with Canon standard pattern; speeds may vary based on contents of print job and processor speed.) Color photo (4" x 6") Approx. 1 minute Color photo (8" x 10") Approx. 2 minutes Print direction: Bi-directional Print width: 8.
Appendix Envelopes Transparencies Glossy Photo Paper High Gloss Photo Film Glossy Photo Cards Banner Paper T-shirt Transfers Photo Paper Pro 4" x 6" Photo Paper Pro Magnet Sheets Ordinary print media: Regular size: Weight: Thickness: Graphic image printing: Data format Resolution Printhead: 10 envelopes maximum 10 sheets maximum 1 sheet 1 sheet 1 sheet 1 sheet (can print up to 6 connected sheets) 1 sheet 20 sheets 1 sheet 1 sheet Letter, Legal, 4" x 6", standard #10 and European DL envelopes Automatic fee
Appendix Limited Warranty—U.S. Only The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon”) with respect to the Canon brand computer peripheral product (the “product”) that you have purchased, when purchased and used in the United States. The product that you have purchased is the only product to which this warranty card and the limited warranty provided by Canon and stated on the card apply.
Appendix Canon offers a full range of customer technical support* options: • For e-mail technical support, the latest driver downloads and answers to frequently asked questions (www.usa.canon.
Appendix must include the reference number, a copy of your dated proof of purchase (bill of sale) and a complete explanation of the problem. Do not include any other items in the return shipping container. This limited warranty gives you specific legal rights, and you may also have other rights that vary from state to state. * 66 Support program specifics are subject to change without notice. ** Refer to the individual product information for warranty details.
Index A D adjusting brightness . . . . . . . . . . . . . . . . . . . . . . . . . . 23 color balance . . . . . . . . . . . . . . . . . . . . . . . . 23 color saturation . . . . . . . . . . . . . . . . . . . . . . 23 colors in photographs . . . . . . . . . . . . . . . . . 20 print quality . . . . . . . . . . . . . . . . . . . . . . 20, 22 advanced print features. . . . . . . . . . . . . . . . . 19 aligning the printhead . . . . . . . . . . . . . . . . . . 29 default printer, setting. . . . . . . . . . . .
Index L loading envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . 13 paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 M magnet sheets . . . . . . . . . . . . . . . . . . . . . . . . . 5 maintaining your printer . . . . . . . . . . . . . . . . 27 Manual print mode . . . . . . . . . . . . . . . . . . . . 15 media to avoid . . . . . . . . . . . . . . . . . . . . . . . . . 6 monitoring ink levels. . . . . . . . . . . . . . . . . . . 27 N nozzle check pattern, printing . . . .
Index smoothing rough edges in images . . . . . . . . 19 specialty media how to load . . . . . . . . . . . . . . . . . . . . . . . . . . 8 printing on . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 types of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Standard print mode . . . . . . . . . . . . . . . . . . . 15 stopping print job, how to . . . . . . . . . . . . . . . 14 system requirements . . . . . . . . . . . . . . . . . . . 56 T tech support, how to contact. . . . . . . . . . .