file:///C|/Documents%20and%20Settings/goldfish12/Desktop/Thank.htm Thank-You for Purchasing from 411 Tech Software To find a Specific Manual click on the “Bookmarks” Button in the left hand corner of the Adobe Reader Program, it will open an Index and make finding the information you need easier. All Rights Reserved. All Trademarks™ and Registered Trademarks™ are of their Respective Companies www.411techsoftware.com file:///C|/Documents%20and%20Settings/goldfish12/Desktop/Thank.
S300 SIMPLIFIED MANUAL (QY8-1377-000) 1 2 3 4 5 6 7 PRODUCT LIST PRODUCT SPECIFICATIONS ERROR CODE LIST SERVICE MODE (Test Printing, EEPROM Initialization, Destination Setting) EXTERNAL VIEW AND PARTS LIST FLOW CHART FOR JUDGING PRINTERS NORMAL OR DEFECTIVE SERVICE TIP APPENDIX: SHIPMENT INSPECTION PATTERN PRINT SAMPLE
1. PRODUCT LIST 1.
2. Product Specifications 2.1 Specifications Paper feeding method Resolution Print speed HQ Color Monochrome HS Color Monochrome Printing direction Printing width Interface ASF capacity Detection functions Acoustic noise Environmental conditions Power supply External dimension Weight Certification ASF 2400 dpi X 1200 dpi 4ppm (Color throughput pattern) 9ppm (Monochrome throughput pattern) 7.
2.3 ASF Specifications New ASF Torque Limiter Separation Roller System New ASF system with improved paper pick-up capability (paper separation ability) 1. Greater paper pick-up capability ->A higher friction coefficient of the paper feed roller rubbers can be achieved. 2. Greater paper separation ability ->A higher friction coefficient of the paper feed roller rubbers can be achieved.
3. ERROR CODE LIST Error codes are displayed on the monitor of the host computer connected to the printer. For error code display, keep the status monitor open.
4. SERVICE MODE Function Manual purging of print head Procedure Test printing 1) Shipment inspection pattern Press the RESUME button once. ROM version No. of pages fed Waste ink amount Destination setting 2) EEPROM information printing Press the RESUME button 2 times. EEPROM initialization Waste ink counter clear Destination setting (overseas / Japan) PTH value information printing Remarks Hold down the RESUME button for 2 seconds Purging period: or more. (while the printer is powered on). Approx.
*1 Shipment inspection pattern print sample EEPROM content can be confirmed by a print of the shipment inspection pattern. ROM Version Destination setting: BJ S300 for Japan, and S300 for others Waste ink amount S300 P=V 0.00 Destination=00 D=000.0 Page=00000 CH=0000 BK=(000) C=(000) HeadT Bk=00.0 HeadT C=00.0 EnvT=00.
5.
6. FLOW CHART FOR JUDGING PRINTERS NORMAL OR DEFECTIVE Printer Check for Refurbishment Power on the printer No Operating sound from CR/LF motor? Yes Open front cover Does carriage move to the head replacement position? N Yes Install print head, and close front cover Is purging performed? (Confirm by sound.) N Yes Print shipment inspection pattern *For printing method, refer to 4. SERVICE MODE. (See the attachment.) 1. Non-ejection of ink: Yes -> Fail 2.
7. Service Tip 7.1 Product Exchange with Service Part Printer Unit With product exchange by using the service part printer unit (WHOLE UNIT, W/O POWER SUPPLY UNIT:Q10-1002-710), follow the procedure below. 1 Remove the AC adapter from the returned printer unit. 2 Connect the removed AC adapter to the new printer unit. 3 Attach the name label on the new printer. (The name label is packaged with the new printer.) 4 Set the destination. (For the setting method, refer to "SERVICE MODE".
7.2 Print Head Replacement Method In User Mode: Open the front cover, and hold down the RESUME button for 3 seconds. The carriage will move to the center position for print head replacement. (In the User Mode, after the initial print head installation, the carriage stops only at the left of print head replacement position, that is, at the ink cartridge replacement position.) In Service Mode: Open the front cover. The carriage will move to the center position.
7.3 Problems in Evaluation Phenomenon Cause Countermeasure / Call Support 1 Boundary smudge due to settling of ink Problem 1. Ink smudge occurs on the boundary line. 2. When purging is once performed after ink settles, and the print head is capped for a long period, clogging may occur. Characteristics of pigment ink: Although pigments and additives are mixed in ink, when ink is left for a long period, pigments settle due to their weight, and density increases from 4% to 8.9% or more.
APPENDIX: SHIPMENT INSPECTION PATTERN Check Item 1 (Non-ejection of ink): Whole Print Check Item 2 (Top of form) S300 P = Vxxx Destination = xx D = xxxx Page = 00000 CH = xxxx Bk = ( xx ) C = ( xx ) HeadT Bk = xxx HeadT C = xxx EnvT = xxx FA = xx xx xx MHI = ( xxxxxxxxxx ) USB = ( xxxxxx ) PC ( A = xxxx B = xxxx D = xxxx E = xxxx F = xxxx G = xxxx ) Bk = xxxxx C = xxxxx M = xxxxx Y = xxxxx Check Item 3 (Straight lines) GA = xx Check Item 4 (Gray area) Check Item 4 (Gray area) Paper Size: A4
