S820QSG.
S820QSG.book Page ii Thursday, October 18, 2001 1:41 PM Canon S820 Color Bubble Jet Photo Printer Quick Start Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc. © 2001 Canon U.S.A., Inc. Disclaimer Canon U.S.A., Inc.
S820QSG.book Page iii Thursday, October 18, 2001 1:41 PM Contents Chapter 1: Basic Printing What Is a Printer Driver? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Selecting the S820 Photo Printer for Use . . . . . . . . . . . . . . . . . . . . 2 Printing Photographs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Using Specialty Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Cancelling a Print Job . . . . . . . . . . . . . .
S820QSG.book Page iv Thursday, October 18, 2001 1:41 PM Contents Appendix Installing the Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Uninstalling the Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Registering Your Canon Product . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . .
S820QSG.book Page 1 Thursday, October 18, 2001 1:41 PM Chapter 1: Basic Printing Congratulations on purchasing your new Canon® S820 Color Bubble Jet Photo Printer! This chapter describes basic features of your S820 photo printer and provides instructions on how to set up and print documents and photographs.
S820QSG.book Page 2 Thursday, October 18, 2001 1:41 PM Basic Printing Selecting the S820 Photo Printer for Use If the S820 is the only printer connected to your computer, it will automatically be used every time you print. However, if your computer has access to multiple printers, you can set the S820 as the default (main) printer. In Windows ®, you can also select a printer for one-time use within an application. To set the S820 as the default printer in Windows®: 1.
S820QSG.book Page 3 Thursday, October 18, 2001 1:41 PM Basic Printing Printing Photographs Canon Photo Paper Pro is recommended for highest quality results. See “Using Specialty Media” on page 4 for more information. To print photographs from a Windows application: 1. Load the printer with specialty media. See “Using Specialty Media” on page 4 to learn how to load various media types. 2. Open the digital photograph to be printed in a software application. 3.
S820QSG.book Page 4 Thursday, October 18, 2001 1:41 PM Basic Printing Caring for Your Photographs The Canon S820 photo printer will generate spectacular results for printing photographs, especially when used with Canon specialty media. All images are susceptible to fading over time, but proper care of prints made from your S820 photo printer will ensure that print quality lasts long into the future. Many environmental factors can impact how long a printout will last before noticeable image fading occurs.
S820QSG.book Page 5 Thursday, October 18, 2001 1:41 PM Basic Printing Canon High Gloss Photo Film: A film sheet with a higher gloss than Canon Glossy Photo Paper. Use this media to obtain high quality reproduction of photo color or to reproduce photographic images of highly reflective surfaces, like metal or glass. Canon Glossy Photo Paper: Covered with a glossy coating on the print side of the sheet to provide near-photographic quality with the gloss feel of a photographic print.
S820QSG.book Page 6 Thursday, October 18, 2001 1:41 PM Basic Printing Media to Avoid Never load the following types of media into your S820 photo printer. These media could produce poor quality and jam or damage the printer: • • • • • • • • • Folded paper Excessively curled or wrinkled paper Damp paper Excessively thin paper Excessively thick paper Paper with adhered photos, stickers, etc.
S820QSG.book Page 7 Thursday, October 18, 2001 1:41 PM Basic Printing Load Limit and Paper Thickness Lever Position Media Type Sheet Feeder Load Limit Paper Thickness Lever Position Plain paper 100 sheets (17 lb.
S820QSG.book Page 8 Thursday, October 18, 2001 1:41 PM Basic Printing • Cover printed sheets with one sheet of plain paper to protect the printed surface, even if you intend to store them in clear plastic folders. For instructions on loading transparencies and banner paper, see the S820 User’s Guide on the Setup Software & User’s Guide CD-ROM. To load plain or High Resolution Paper: 1. Set the paper thickness lever to the left, towards the Paper thickness lever paper mark. 2.
S820QSG.book Page 9 Thursday, October 18, 2001 1:41 PM Basic Printing To load High Gloss Photo Film: 1. Set the paper thickness lever to the left, towards the paper mark. 2. Slide the paper guide completely to the left. 3. With the print side facing up, align a sheet of High Gloss Photo Film with the right side of the sheet feeder and insert the sheet into the printer until it stops. 4. Slide the paper guide right to the edge of the sheet.
S820QSG.book Page 10 Thursday, October 18, 2001 1:41 PM Basic Printing • You can load up to 20 sheets of Photo Paper Pro 4" x 6" or Glossy Photo Cards at a time with the loading support sheet. • Make sure that the loading support sheet is pointing down in the direction of the arrow.
S820QSG.book Page 11 Thursday, October 18, 2001 1:41 PM Basic Printing To load envelopes: 1. Set the paper thickness lever to the right, Paper thickness lever towards the envelope mark. 2. Slide the paper feed guide completely to the left. 3. Press down on the corners and sides of the envelopes to make them as flat as possible by expelling all of the air in them. To avoid paper jams, make sure the envelopes are flat before you load them into the sheet feeder. 4.
S820QSG.book Page 12 Thursday, October 18, 2001 1:41 PM Basic Printing To cancel a print job using the BJ Status Monitor: Click Cancel Printing after the print job has started. The print job will be cancelled and the paper ejected. To cancel a print job from Windows: 1. Click Start, then Settings, then Printers. Windows XP users: Click Start, select Control Panel, then Printers and Other Hardware, then Printers and Faxes. 2. Double-click Canon S820, click the print job, then press the Delete key.
S820QSG.book Page 13 Thursday, October 18, 2001 1:41 PM Basic Printing Setting Driver Options The S820 printer driver can be customized to give you the best quality output. This topic describes the main options. For more options, see the S820 User’s Guide on the Setup Software & User’s Guide CD-ROM. Print Mode Your S820 photo printer offers the following modes of operation. Each mode adjusts the driver settings for the type of project you are printing.
S820QSG.book Page 14 Thursday, October 18, 2001 1:41 PM Basic Printing To set the print mode in Windows: 1. From an application File menu, select Print. 2. Make sure Canon S820 is the selected printer, then click Properties. 3. On the Main tab, click the Print Quality that best describes your print job, then click OK. To set the print mode in Mac OS: 1. From a Macintosh application File menu, select Print. 2. Select the Print Mode that best describes your print job.
S820QSG.book Page 15 Thursday, October 18, 2001 1:41 PM Basic Printing a different printer paper size can be selected if a Printing Type other than normal is selected (see below). Printing Type Defaults to Normal-size Printing. Click the drop-down arrow to select one of these Printing Types: Fit-to-Page Printing This option automatically rescales the image to fit into a specified page size.
S820QSG.book Page 16 Thursday, October 18, 2001 1:41 PM Basic Printing To change the page setup in Mac OS: 1. Make sure that S820 is the selected printer (from the Apple menu, select Chooser, then S820). 2. From an application File menu, click Page Setup. The Page Setup dialog box will open. 3. From this dialog box, you can change the following: • Select a paper size from the Paper Size drop-down list. (If printing a banner, click the Banner Printing check box, then follow the on-screen instructions.
S820QSG.book Page 17 Thursday, October 18, 2001 1:41 PM Basic Printing 4. From the Options dialog box, you can enter or change the following: • To print in reverse order, check the Print in reverse order box. • If you are printing more than one copy, check the Print collated pages box to collate each copy instead of printing all of page 1, then all of page 2, etc. • Under Layout, click the drop-down arrow to change the number of pages to print on a sheet (from 1 Page up to 16 Pages).
S820QSG.
S820QSG.book Page 19 Thursday, October 18, 2001 1:41 PM Chapter 2: Advanced Print Features This chapter provides information on how to use the S820 photo printer options to enhance printed color images.
S820QSG.book Page 20 Thursday, October 18, 2001 1:41 PM Advanced Print Features Smoothing Rough or Jagged Edges Use the Image Optimizer feature to smooth rough or jagged images. 1. From an application File menu, select Print. 2. Make sure Canon S820 is the selected printer, then click Properties. 3. Select the Effects tab. 4. Click the Image Optimizer check box. 5. When done, click OK.
S820QSG.book Page 21 Thursday, October 18, 2001 1:41 PM Advanced Print Features To optimize color photographs in Mac OS: 1. From an application File menu, select Print. 2. Click the Manual print mode icon, then Details. The Detailed Setting dialog box will open. 3. Select Special Effects in the left column, then click the Photo Optimizer PRO check box. 4. If you want Photo Optimizer PRO to process the entire page, check Apply Throughout Page.
S820QSG.book Page 22 Thursday, October 18, 2001 1:41 PM Advanced Print Features Adjusting Print Quality You can create a sharper image by specifying the printer to add more dots of ink for the image. Keep in mind that the finer the quality, the longer it takes to print a photograph. To adjust image quality in Windows: 1. From an application File menu, select Print. 2. Make sure that Canon S820 is the selected printer, then click Properties. 3. Under Print Quality, select Custom, then click Set. 4.
S820QSG.book Page 23 Thursday, October 18, 2001 1:41 PM Advanced Print Features Adjusting Color Balance, Brightness and Saturation You can enhance color printing by adjusting the color balance, output style (saturation) and brightness. For detailed information about these settings, see the S820 User’s Guide on the Setup Software & User’s Guide CD-ROM. To adjust color settings in Windows: 1. From an application File menu, select Print. 2. With Canon S820 as the selected printer, click Properties. 3.
S820QSG.book Page 24 Thursday, October 18, 2001 1:41 PM Advanced Print Features 7. Under Print Type, select Photo when printing photographs. This allows for a wider range of tones. Set to Graphic when printing graphic images for crisper, cleaner graphic images. 8. Select a Brightness setting to determine how light or dark the image will appear when printed. 9. When done, click OK. To print in black only, check the Grayscale Printing box.
S820QSG.book Page 25 Thursday, October 18, 2001 1:41 PM Advanced Print Features Saving and Recalling Driver Settings You can assign a name to a combination of driver settings and recall them for future use. To save driver settings in Windows: 1. From an application File menu, select Print. 2. With Canon S820 as the selected printer, click Properties. 3. Make the desired printer driver setting changes. 4. Without exiting the Properties window, select the Profiles tab. 5.
S820QSG.book Page 26 Thursday, October 18, 2001 1:41 PM Advanced Print Features To recall driver settings in Windows: 1. From an application File menu, select Print. 2. With Canon S820 as the selected printer, click Properties. 3. Select the Profiles tab. 4. Highlight the saved setting profile you want to use. 5. Click Retrieve from Profiles, then click OK to confirm the profile change. The profile settings will become active. 6. Click OK again to close the window.
S820QSG.book Page 27 Thursday, October 18, 2001 1:41 PM Chapter 3: Printing Maintenance This chapter provides information on how to care for the ink delivery system for your Canon S820 photo printer. The following topics are addressed: • Monitoring Ink Levels • Replacing Ink Tanks • Aligning the Printhead • Printing a Nozzle Check Pattern • Cleaning the Printhead Monitoring Ink Levels The print driver contains a feature that enables you to monitor the level of ink in each ink tank.
S820QSG.book Page 28 Thursday, October 18, 2001 1:41 PM Printing Maintenance 3. Select the Maintenance tab, then click Start Status Monitor. The BJ Status Monitor window will appear. The Ink panel displays the ink levels for each tank. The following icons appear when an ink tank is low or has run out of ink: Ink low. Replace ink tank as soon as possible. Ink out. Replace ink tank immediately. 4.
S820QSG.book Page 29 Thursday, October 18, 2001 1:41 PM Printing Maintenance Replacing Ink Tanks Follow these steps to replace an empty ink tank. 1. Turn on the printer, then open the front cover. The printhead holder will automatically move to the center. 2. Press the tab on the front of the ink tank, then remove and discard the empty tank. 3. Remove the new ink tank from its package. Pull the orange tape up, remove the wrapper and twist off the orange protective cap.
S820QSG.book Page 30 Thursday, October 18, 2001 1:41 PM Printing Maintenance 4. From the Maintenance tab, click the Print Head Alignment button. 5. When prompted to print an alignment test page, click OK. 6. If the pattern printed successfully, click Yes. 7. Compare the different patterns for each color on the printout. Notice that most patterns have vertical lines, but some in the middle look smooth and uniform. 8.
S820QSG.book Page 31 Thursday, October 18, 2001 1:41 PM Printing Maintenance 4. Select Test Print from the pull-down menu, and click the Print Head Alignment button. 5. When prompted to print an alignment test page, click OK. 6. Compare the different patterns for each color on the printout. Notice that most patterns have vertical lines, but some in the middle look smooth and uniform. 7.
S820QSG.book Page 32 Thursday, October 18, 2001 1:41 PM Printing Maintenance 4. Click the Maintenance tab, then click the Nozzle Check button. The Maintenance tab button may vary for Windows NT® 4.0, Windows 2000 and Windows XP. 5. Read the messages, then click OK. The nozzle test pattern will print. 6. Check the nozzle check pattern. • If part of the top pattern is missing, clean the printhead. See “Cleaning the Printhead” on page 33 for instructions.
S820QSG.book Page 33 Thursday, October 18, 2001 1:41 PM Printing Maintenance 6. Check the nozzle check pattern. If part of the top pattern is missing, clean the printhead. See “Cleaning the Printhead” for instructions. If the bottom pattern is streaked vertically with white, align the printhead. See “Aligning the Printhead” on page 29 for instructions. Cleaning the Printhead If your printed output appears faded, streaked or scratchy, the printheads may need to be cleaned.
S820QSG.book Page 34 Thursday, October 18, 2001 1:41 PM Printing Maintenance 5. For each message displayed, click OK. The BJ Status Monitor opens automatically and closes when the printhead cleaning is done. The POWER lamp on the printer flashes green during the cleaning process. 6. Print a nozzle check pattern to check the results of the printhead cleaning. See “Printing a Nozzle Check Pattern” on page 31 for instructions. 7. If there is no change after cleaning, check the amount of ink remaining.
S820QSG.book Page 35 Thursday, October 18, 2001 1:41 PM Chapter 4: Using Your Photo Applications Several photo applications come with your Canon S820 that make it easy to organize, view, manipulate and print color photographs. • A browser (ZoomBrowser EX for Windows and ImageBrowser for Mac OS) provides easy viewing of photos and other images stored on your computer.
S820QSG.book Page 36 Thursday, October 18, 2001 1:41 PM Using Your Photo Applications 3. From the installation main menu, click Application. The photo application software options panel will appear. 4. Make sure all the installation options are selected, then click Install. 5. Follow the on-screen instructions. 6. When the Terminate Installation dialog box appears, click OK. 7. Restart your computer. The photo applications will not be fully functional until your computer has been restarted.
S820QSG.book Page 37 Thursday, October 18, 2001 1:41 PM Using Your Photo Applications Using the Photo Applications Viewing Images with a Browser You can use the ZoomBrowser (Windows) or the ImageBrowser (Mac OS) to view or organize digital images stored on your computer, or to view and copy from other sources, such as digital cameras, scanners, Zip® disks or CD-ROMs. To open ZoomBrowser EX in Windows: 1. Make sure the images you want to view are on your hard drive or other accessible media. 2.
S820QSG.book Page 38 Thursday, October 18, 2001 1:41 PM Using Your Photo Applications 3. From this window you can: Navigate through available files from the panel on the left. View thumbnail images of the files in a folder in the panel on the right. Organize or delete files. For a full description of all features and options available, use Mac Balloon Help, or consult the Photo Application Guide on your CD-ROM.
S820QSG.book Page 39 Thursday, October 18, 2001 1:41 PM Using Your Photo Applications 5. Arrange the photos as you would like them, or let the automatic layout feature do it for you. 6. When you are ready to print, click Print on the Album Control Panel. Merging Multiple Images with PhotoStitch With PhotoStitch, you can merge images in horizontal or vertical sequences, or “stitch” together digital photos or image documents that have been shot or scanned in sections.
S820QSG.book Page 40 Thursday, October 18, 2001 1:41 PM Using Your Photo Applications To merge images in Mac OS: 1. Make sure the images you want to view are on your hard drive or other accessible media. 2. From within the ImageBrowser window (see “To open ImageBrowser in Mac OS” on page 37), select one or more images. The images will highlight. 3. From the Edit menu, click PhotoStitch. The PhotoStitch utility will appear. 4.
S820QSG.book Page 41 Thursday, October 18, 2001 1:41 PM Using Your Photo Applications To load Photo Paper Pro for Borderless Printing 4" x 6": 1. Set the paper thickness lever to the left. Paper thickness lever 2. Slide the paper guide completely to the left. 3. With the glossy side facing up, place a sheet on top of the Loading Support Sheet provided with your Canon Photo Paper Pro for Borderless Printing 4" x 6" media. 4. Align the edges of both sheets. 5.
S820QSG.book Page 42 Thursday, October 18, 2001 1:41 PM Using Your Photo Applications 5. Click Next. 6. Specify Media Type, Paper Size and Orientation. The Preview area will show the print image in relation to the paper. 7. Click Set Page Margins to widen or narrow the printing area, then click OK, then Next. 8. Specify the number of photo tiles you want to place in a single page. Select 1 (1 row) when printing a photo with no margins.
S820QSG.book Page 43 Thursday, October 18, 2001 1:41 PM Chapter 5: Troubleshooting Tips for Troubleshooting Troubleshooting usually falls into one of the following categories: Installation The printer driver will not install properly. Printer Hardware The printer is not working or not working as expected. Printed Output The printed output is not coming out as expected. Error Message You are getting an error message from the software (displayed on the screen) or the printer (indicated by blinking lights).
S820QSG.book Page 44 Thursday, October 18, 2001 1:41 PM Troubleshooting Troubleshooting Installation Problem Possible Cause Cannot install the printer driver Procedure not followed correctly See “Installing the Printer Driver” on page 53, or see the S820 User’s Guide on the Setup Software & User’s Guide CD-ROM for more information.
S820QSG.book Page 45 Thursday, October 18, 2001 1:41 PM Troubleshooting Problem Cannot install the printer driver Possible Cause Try This CD-ROM drive not working properly WINDOWS Use My Computer to confirm that the CD-ROM is operating normally: (continued) 1. From the Desktop, double-click My Computer, then CD-ROM. For Windows XP, click Start, then My Computer, then CD-ROM drive. 2. If the files do not appear, refer to your Windows documentation for more information.
S820QSG.book Page 46 Thursday, October 18, 2001 1:41 PM Troubleshooting Problem Printer is not responding Possible Cause Try This Power cable is not securely connected Verify that the power cable is securely connected to the printer and plugged into a working outlet. Printer is not turned on, or is not ready Verify that the POWER lamp is on and glowing a steady green. If the light is off, press the POWER button.
S820QSG.book Page 47 Thursday, October 18, 2001 1:41 PM Troubleshooting Problem Printing is slow (continued) Possible Cause Computer resources are low; not enough disk space Try This When a print job is sent to the printer, it first goes to a temporary print spool. If the file is large and you have limited disk space available, this can slow or stop printing. WINDOWS Delete all temporary files (.tmp). If you have Windows 98 or later, you can also run the Disk Cleanup utility: 1.
S820QSG.book Page 48 Thursday, October 18, 2001 1:41 PM Troubleshooting Troubleshooting Printed Output Problem Printout and screen image colors appear different Possible Cause Try This Low ink Verify that you have sufficient ink in the ink tanks. See “Monitoring Ink Levels” on page 27. Printhead may need to be replaced Verify that the printhead is working properly. See “Printing a Nozzle Check Pattern” on page 31, and/or “Cleaning the Printhead” on page 33.
S820QSG.book Page 49 Thursday, October 18, 2001 1:41 PM Troubleshooting Problem Printed output is faded or unclear Possible Cause Try This Media not loaded print-side up Check that your media is placed in the printer facing in the correct direction. See “Loading Media into the S820” on page 7. Low ink Verify that you have sufficient ink in the ink tanks. See “Monitoring Ink Levels” on page 27. Printhead nozzles clogged or damaged Verify that the printhead is working properly.
S820QSG.book Page 50 Thursday, October 18, 2001 1:41 PM Troubleshooting Handling Error Messages Problem Printer does not print 50 Possible Cause Try This When an error occurs, the POWER lamp blinks. Count the number of orange blinks between each green blink to identify the problem: Printer blinks green When the lamp blinks green, the printer is warming up or is receiving print data from the computer. This is not an error condition.
S820QSG.book Page 51 Thursday, October 18, 2001 1:41 PM Troubleshooting Problem Possible Cause Try This Low ink alert displays in the BJ Print Monitor One or more of the ink tanks is low When Backgrounding is turned on, you can confirm the low ink alert in the BJ Print Monitor. (See “Monitoring Ink Levels” on page 27.) After the alert displays, you can continue printing for a short time, but have a replacement ready to install. WINDOWS The low ink alert displays in the BJ Status Monitor.
S820QSG.book Page 52 Thursday, October 18, 2001 1:41 PM Troubleshooting Customer Care Center Canon offers a full range of customer technical support* options: • For e-mail support, the latest driver downloads and answers to frequently asked questions (www.canontechsupport.
S820QSG.book Page 53 Thursday, October 18, 2001 1:41 PM Appendix The following topics are included in this appendix: • Installing the Printer Driver • Uninstalling the Printer Driver • Registering Your Canon Product • System Requirements • Safety Information • Regulatory Information • Product Specifications • Limited Warranty—U.S.
S820QSG.book Page 54 Thursday, October 18, 2001 1:41 PM Appendix If the setup program does not run automatically, click Start, then Run, then type D:\msetup.exe (where D is the CD-ROM drive). 4. Read the License Agreement, then click Yes if you agree. If a message prompts you to restart Windows, remove the CD-ROM, then click OK. After the computer restarts, re-insert the CD-ROM and continue. 5. When the main menu appears, make sure that the Printer Driver is highlighted, then click Install.
S820QSG.book Page 55 Thursday, October 18, 2001 1:41 PM Appendix 6. Read the License Agreement, then click Accept if you agree. 7. Click Install. The the printer driver will load automatically. If a “No other applications can be running...” message displays, click Continue. 8. When the installation has completed, click Restart. 9. After the computer restarts, select the Apple menu, then Chooser. 10. Click the S820 icon in the Chooser.
S820QSG.book Page 56 Thursday, October 18, 2001 1:41 PM Appendix Registering Your Canon Product To register your Canon product in Windows: If you did not register your product during installation, visit www.registercanon.com and follow the on-screen instructions. To register your Canon product in Mac OS: Visit www.registercanon.com and follow the on-screen instructions.
S820QSG.book Page 57 Thursday, October 18, 2001 1:41 PM Appendix Always follow the instructions provided in Cautions to prevent minor injuries to yourself or damage to the equipment as a result of careless operation of the equipment. Read and follow all of these cautions and warnings to ensure the safe use of the printer. To avoid the hazards of fire, personal injury, or damage to the printer, never attempt to use the printer in any way other than the methods described in this guide.
S820QSG.book Page 58 Thursday, October 18, 2001 1:41 PM Appendix Power Supply Never attempt to plug the power cord into a power outlet when your hands are wet. To avoid electric shock, make sure that your hands are dry. • Always push the plug completely into the power outlet. A loose or poorly connected plug could cause a fire or electric shock. Never cut, modify, stretch, bend, or twist the power cord, and never place heavy objects on the power cord.
S820QSG.book Page 59 Thursday, October 18, 2001 1:41 PM Appendix Cleaning and Maintaining the Printer • Use only a slightly damp cloth to clean the printer. Never use flammable solvents like alcohol, benzene, thinner, etc. If a flammable solvent contacts an electrical component inside the printer, a fire or electric shock could result. • Always unplug the printer power cord before you clean the printer.
S820QSG.book Page 60 Thursday, October 18, 2001 1:41 PM Appendix Printhead and Ink Tanks For safety, always store printhead and ink tanks out of the reach of small children. If a child accidentally licks or ingests any ink, consult a physician immediately. Never subject a printhead or ink tank to shocks or excessive vibration. Shaking could cause ink to leak and stain clothing and nearby surfaces.
S820QSG.book Page 61 Thursday, October 18, 2001 1:41 PM Appendix encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
S820QSG.book Page 62 Thursday, October 18, 2001 1:41 PM Appendix Product Specifications Bubble Jet ink on-demand 2400 x 1200 dpi 4" x 6" and 8" x 10" photo print speeds are based on standard (default) mode on Photo Paper Pro. Print speed will vary depending on system configuration, software, document complexity, print mode and page coverage. Color photo (4" x 6"): Approx. 1 minute Color photo (8" x 10"): Approx. 2 minutes Print direction: Bi-directional Print width: 8.0 inches maximum (203.
S820QSG.book Page 63 Thursday, October 18, 2001 1:41 PM Appendix Sheet feeder capacity (maximum): Plain paper (17 lb.
S820QSG.book Page 64 Thursday, October 18, 2001 1:41 PM Appendix Limited Warranty—U.S. Only The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon”) with respect to the Canon brand computer peripheral product (the “product”) that you have purchased, when purchased and used in the United States. The product that you have purchased is the only product to which this warranty card and the limited warranty provided by Canon and stated on the card apply.
S820QSG.book Page 65 Thursday, October 18, 2001 1:41 PM Appendix Canon offers a full range of customer technical support* options: • For e-mail technical support, the latest driver downloads and answers to frequently asked questions (www.canontechsupport.
S820QSG.book Page 66 Thursday, October 18, 2001 1:41 PM Appendix The Canon repair facility will ship out the replacement product via overnight courier, prepaid by Canon. After receipt of the replacement product (with instructions and a pre-paid return waybill), follow the instructions to ship the defective product to a Canon repair facility.
S820QSG.book Page 67 Thursday, October 18, 2001 1:41 PM Index A E adjusting brightness .................................................. 23 color balance .............................................. 23 color saturation ........................................... 23 colors in photographs .................................... 20 print quality ...........................................20, 22 advanced print features .................................... 19 aligning the printhead ...........................
S820QSG.book Page 68 Thursday, October 18, 2001 1:41 PM Index P page setup .................................................... 14 panoramic views ............................................. 35 paper creative ........................................................ 5 general ........................................................ 4 how to choose................................................ 4 how to load ................................................... 7 lever position for thick paper..............
