PHOTO PRINTER User’s Guide V1
Table of Contents Table of Contents Introduction .....................................................................................................5 How to Use This Manual .................................................................................6 Safety Precautions .........................................................................................8 Printer Driver Functions (Windows) ..............................................................15 Opening the Printer Properties Dialog Box .
Table of Contents Using the Memory Card Utility (Macintosh) ..................................................73 Starting the Memory Card Utility ................................................................. 74 Setting the Application to Be Started ........................................................... 77 Deleting the Memory Card Utility ................................................................. 80 Routine Maintenance ........................................................................
Table of Contents Troubleshooting ..........................................................................................132 Cannot Install the Printer Driver ................................................................ 133 Print Quality is Poor or Contains Errors .................................................... 135 Printer Does Not Start or Stops During Print Jobs .................................... 152 Paper Does Not Feed Properly or Paper Jams .........................................
Introduction Introduction Thank you for purchasing the Canon S820D Photo Printer. This User’s Guide provides complete explanations of the features and functions of the printer. This guide uses the following symbols to indicate important information. Always observe these instructions. Warning ➤ Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. Must be observed for safe operation.
How to Use This Manual How to Use This Manual To view this User’s Guide, we recommend that you use Acrobat Reader 3.0 or later. The screens shown below are for Acrobat Reader 4.0. Please note that screens displayed by Acrobat Reader 3.0 or 5.0 are slightly different. Displays the previous page. Use this button to enlarge the viewing screen. Select this button in the tool bar and click within the screen. Displays the next page. Returns to the page you were viewing previously.
How to Use This Manual Use this button to search for a word. Displays the table of contents. Click the heading to jump to the topic. Click the " " symbol to see the headings for each chapter. Click the " " symbol to close the headings.
Safety Precautions Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use the printer safely. Do not attempt to use the printer in any way not described in this manual. Warning ➤ You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions. ■ Choosing a location Do not place the printer close to flammable solvents, such as alcohol or thinners.
Safety Precautions Never plug the printer into a power socket (extension cord, double adapter, etc.) that powers multiple devices. Never use the printer if the power cord is bundled or knotted. If you detect smoke, unusual smells or strange noises around the printer, immediately unplug the printer at the power supply and call the Canon Customer Care Center. Periodically, unplug the printer and use a dry cloth to wipe off any dust or dirt collects on the plug and the power outlet.
Safety Precautions ■ Maintaining the printer Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside the printer. The printer contains high-voltage components. Never attempt any maintenance procedure not described in this guide. ■ Working around the printer Do not use inflammable sprays near the printer. This could cause a fire or electric shock if the spray comes into contact with electrical components inside the printer.
Safety Precautions Caution ➤ You may cause injury or damage the printer if you ignore any of these safety precautions. ■ Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration. Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source.
Safety Precautions ■ Power supply Never remove the plug by pulling on the cord. Do not use a powerstrip. Never use a power supply voltage other than that supplied in the country of purchase.
Safety Precautions ■ Working around the printer Never put your hands or fingers in the printer while it is printing. Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents (alcohol, thinners. etc.) on top of the printer. If any foreign object (metal or liquid) falls into the printer, unplug the power cord and call the Canon Customer Care Center. ■ Printheads and ink tanks For safety reasons store printheads and ink tanks out of the reach of small children.
Safety Precautions ■ About the Operation Panel If the operation panel becomes damaged and the liquid crystal solution in the panel leaks out, DO NOT taste or swallow the liquid. If the liquid is accidentally swallowed, call a physician immediately. If the liquid gets on your hands or clothes, wash them immediately with soap.
Printer Driver Functions (Windows) Printer Driver Functions (Windows) • Opening the Printer Properties Dialog Box • Printer Properties Dialog Box Description • BJ Status Monitor Functions • Cancelling a Print Job • Uninstalling Printer Drivers 15
Printer Driver Functions (Windows) Opening the Printer Properties Dialog Box The Printer Properties dialog box can be opened from either within an application, or directly from the Windows Start menu. ■ Opening the Printer Properties dialog box from an application This method is generally used to specify printer settings just before printing. The operations may vary slightly depending on the application. This section describes only the general procedure for opening the Printer Properties dialog box.
Printer Driver Functions (Windows) ■ Opening the Printer Properties dialog box directly from the Start menu This method is used for maintenance operations, such as printhead cleaning, or to specify printer settings common to all application programs. When the Printer Properties dialog box is opened from the Start menu, the Windows operating system adds several tabs, including the Details tab. These do not appear when the Printer Properties dialog box is opened from within an application.
Printer Driver Functions (Windows) Printer Properties Dialog Box Description • Main Tab • Page Setup Tab • Stamp/Background Tab • Effects Tab • Profiles Tab • Maintenance Tab Note ➤ The screens in this section refer to Windows Me/Windows 98 operation. The equivalent screens for Windows XP and Windows 2000 may look slightly different.
Printer Driver Functions (Windows) Main Tab (1) (2) (6) (3) (4) (5) (1) (2) Media Type Ensure that this setting matches the type of media loaded in the printer. Print Quality Select the print quality you require from among the different options. To select custom Print quality, select Custom and click the Set... button.
Printer Driver Functions (Windows) (3) (4) (5) (6) Color Adjustment Select the method of color adjustment. To make detailed color adjustments, select Manual, then click the Set... button. Grayscale Printing Select to print a grayscale version of a color document. Print Advisor... Click to start the Print Advisor. The Print Advisor simplifies configuration of the printer driver. By having the user answer a series of questions, the Printer Advisor automatically configures the printer driver settings.
Printer Driver Functions (Windows) Page Setup Tab (1) (2) (3) (9) (4) (5) (6) (7) (8) (1) (2) Page Size Ensure that the correct paper size is selected. Orientation Select landscape or portrait printing and ensure that it is the same orientation used in the application.
Printer Driver Functions (Windows) (3) (4) Printing Type Select the printing method from among the following. Normal-size Printing The document is printed according to the original dimensions. This setting is usually selected by default. Fit-to-Page Printing The document is automatically resized to fit the paper size. When using this function, ensure that you have correctly specified the Page Size and the Printer Paper Size. Scaled Printing The document is resized when printed.
Printer Driver Functions (Windows) (5) (6) (7) (8) (9) Amount of Extension When you select Borderless Printing, the sections that extend beyond the paper are not printed because the image is enlarged to a size slightly larger than the paper size. You can use the Amount of Extension slide bar to adjust how much the image extends beyond the paper. It is recommended that you normally set the slide bar to the right end.
Printer Driver Functions (Windows) Stamp/Background Tab (1) (2) (3) (4) (5) (7) (8) (1) (2) (3) (6) Stamp Select the check box and choose the stamp. Place stamp over text When selected, the stamp is printed over the print data. Stamp first page only Prints the stamp only on the first page.
Printer Driver Functions (Windows) (4) (5) (6) (7) (8) Define Stamp... This allows you to create new stamps, or modify details of a selected stamp. Background Select the check box and choose the background image you wish to use. Background first page only Prints the background image only on the first page. Select Background... This allows you to register a new background, or to display details of the background you have selected. Preview Area Shows how the stamp will appear on the printed page.
Printer Driver Functions (Windows) Effects Tab (1) (6) (2) (3) (4) (5) (1) Simulate Illustration Select the check box to manipulate color image data to produce illustration effects. Adjust the brightness of the image with the Contrast slide bar.
Printer Driver Functions (Windows) (2) (3) (4) (5) (6) Monochrome Effects Prints a color image in a single color. Select the check box and choose a color or use a custom color using Select Color. Vivid Photo By using this function, you can reproduce breathtaking sceneries in which colors, especially blues and greens, appear even more vibrant.
Printer Driver Functions (Windows) Profiles Tab (1) (2) (3) (4) (6) (5) (1) Printing Profiles This list displays the printing settings currently registered in the Profiles tab. The Current Settings profile contains the settings currently specified in the Main, Page Setup and Effects tabs. The Default Settings profile contains the factory default settings.
Printer Driver Functions (Windows) (2) (3) (4) (5) (6) Details Displays all the printer settings selected in Printing Profiles. Description Displays a description of the printer settings selected in Printing Profiles. You can enter the description when saving the printer settings. Add to Profiles... Click to save the settings currently specified in the Main, Page Setup and Effects tabs. Select Current Settings in the Printing Profiles list then click this button. The Add to Profiles dialog box appears.
Printer Driver Functions (Windows) Maintenance Tab (1) (2) (5) (3) (4) (6) (7) (8) (1) (2) Cleaning Click to start printhead cleaning. Deep Cleaning Click to start printhead deep cleaning. Use this function only if Cleaning has not improved the print quality.
Printer Driver Functions (Windows) (3) (4) (5) (6) (7) (8) Printhead Alignment Aligns the printhead. For details on printhead alignment, refer to the Quick Start Guide. Nozzle Check Prints the nozzle check pattern to ensure that the printhead nozzles are ejecting ink normally. For details, refer to “Examining the Nozzle Check Pattern.” Power Off Click to turn the printer off. Custom Settings Click to modify the printer mode.
Printer Driver Functions (Windows) BJ Status Monitor Functions The BJ Status Monitor allows you to check the status of the printer. If an error occurs, the BJ Status Monitor indicates the nature of the error and suggests an appropriate solution. It also checks the ink tanks and displays a warning message when the ink is low. ■ Launching the BJ Status Monitor The BJ Status Monitor launches automatically when data is sent to the printer.
Printer Driver Functions (Windows) Note ➤ To open the BJ Status Monitor when the printer is not printing, click the Maintenance tab in the Printer Properties dialog box and click the Start Status Monitor button.
Printer Driver Functions (Windows) ■ When errors occur or ink runs low The BJ Status Monitor is automatically displayed when an error occurs (e.g., if the printer runs out of paper or ink is low). In such cases, take the appropriate action as described in the Printer Status tab. In Windows Me or Windows 98, click the Guide tab and follow the instructions on screen.
Printer Driver Functions (Windows) Cancelling a Print Job To cancel the current print job, first open the BJ Status Monitor. Note 1 Click the Canon BJ Status Monitor icon on the Task Bar. 2 Click Cancel Printing. ➤ If Cancel Printing is grayed out, press the printer's RESUME/CANCEL button to terminate the print job.
Printer Driver Functions (Windows) Uninstalling Printer Drivers Use the Uninstaller to delete any unwanted printer drivers. This allows you to delete all the files associated with the printer driver at the same time. Note 1 Click the Start button and select Programs, Canon S820D, Uninstall. ➤ For Windows XP, click the Start button and select All Programs, Canon S820D, Uninstall. 2 Click Yes when the confirmation message appears. 3 When all the files have been deleted, click OK.
Printer Driver Functions (Macintosh) Printer Driver Functions (Macintosh) • Description of Print Settings • BJ Print Monitor • Cancelling a Print Job • Using the Printer with a Network • Uninstalling Printer Drivers 37
Printer Driver Functions (Macintosh) Description of Print Settings • Page Setup Dialog Box • Printer Utility Dialog Box • Print Dialog Box • Detailed Setting Dialog Box • Options Dialog Box • Register Settings Dialog Box Description of Print Settings 38
Printer Driver Functions (Macintosh) Page Setup Dialog Box The Page Setup dialog box contains settings for the printed page, such as the size of the print media, and resizing the printed image. To open the Page Setup dialog box, select Page Setup from the File menu in an application. (1) (2) (7) (10) (3) (8) (4) (5) (6) (9) (1) (2) Paper Size Select the size of the paper for the print job. To enter the size manually, select Custom 1 - Custom 3 and click Custom.
Printer Driver Functions (Macintosh) (3) (4) (5) (6) (7) (8) Borderless Printing The image is printed on the entire paper surface, so that no margins are left on the four sides of the paper. The media types available for Borderless Printing are Photo Paper Pro and Glossy Photo Paper. For all other media types, the print quality may decrease.
Printer Driver Functions (Macintosh) (9) Save Settings Saves the settings specified in the Page Setup dialog box. (10) Preview Area This image allows you to confirm how the document will print with the selected paper settings.
Printer Driver Functions (Macintosh) Printer Utility Dialog Box The Printer Utility dialog box is displayed when you click the Utilities button in the Page Setup dialog box. (1) (2) (1) (2) Select the function you wish to perform. Display area showing the various maintenance functions, including cleaning and test pattern printing. Click the icon to start this function. For further details, refer to "Routine Maintenance.
Printer Driver Functions (Macintosh) ➡ Printhead Cleaning ➡ Printhead Deep Cleaning Note ➤ For information about Printhead Alignment, refer to the Quick Start Guide.
Printer Driver Functions (Macintosh) Print Dialog Box The Print dialog box specifies the media type and print settings to be used for your print job. To open the Print dialog box, select Print from the File menu in an application. (1) (3) (4) (5) (6) (2) (1) (2) (3) Media Type Ensure that this setting matches the type of paper media loaded in the printer. Grayscale Printing Select to print a grayscale version of a color document.
Printer Driver Functions (Macintosh) (4) (5) (6) Details... Allows you to manually set the print quality and color settings in the Detailed Setting Dialog Box. Options... Specify the output destination, print order and page layout for the document you are printing. Apply... Allows you to register print settings or to implement a previously registered print setting.
Printer Driver Functions (Macintosh) Detailed Setting Dialog Box To open the Detailed Setting dialog box, select Manual then click Details.... in the Print dialog box and (2) (1) (3) (1) Panel display icons Click these icons to switch between panels in the Detailed Setting dialog box.
Printer Driver Functions (Macintosh) (2) (3) Print Quality Move the slide bar to adjust the balance between print quality and speed. Moving the bar to the right enhances print quality, and moving it to the left increases printing speed. Halftoning Select either Dither or Diffusion ink dot configurations.
Printer Driver Functions (Macintosh) ■ Special Effects Panel To display the Special Effects panel, click the Special effects display icon. (1) (5) (2) (3) (4) (1) Simulate illustration Select the check box to manipulate color image data to produce illustration effects. Adjust the brightness of the image with the Contrast slide bar.
Printer Driver Functions (Macintosh) (2) (3) (4) (5) Monochrome effects Prints a color image in a single color. Select the check box and choose the color you wish to use. Vivid Photo By using this function, you can reproduce breathtaking sceneries in which colors, especially blues and greens, appear even more vibrant.
Printer Driver Functions (Macintosh) ■ Color Panel To display the Color panel, click the Color display icon. (1) (2) (3) (4) (5) (6) (1) Color Correction Select a color correction method: BJ Standard, ColorSync or None. BJ Standard is usually the optimum color correction method for printing with a Bubble Jet printer. When ColorSync is selected, you should also specify the Print Type and Printer Profile settings.
Printer Driver Functions (Macintosh) (2) (3) (4) (5) (6) Print Type For printing that emphasizes intermediate colors, select Photo. For printing that emphasizes the brightness of primary colors, select Graphics. For documents that contain large amounts of a basic color, select Spot Color. Printer Profile Select optimized color characteristics (a profile) for the media type and other factors. Gamma Correction This function adjusts the color contrast (not including pure black and white).
Printer Driver Functions (Macintosh) Options Dialog Box To open the Options dialog box, click the Options... button in the Print dialog box. (1) (7) (2) (3) (4) (1) (5) (6) Layout Allows you to print two or four pages of a document on a single page, or to enlarge printing so that a single page spans multiple sheets of paper (Poster Printing). If you select 2Page/Sheet Printing or 4Page/Sheet Printing, you should also set the Page Order to specify the document page order for printing.
Printer Driver Functions (Macintosh) (2) (3) (4) (5) (6) (7) Duplex Printing The document is printed on both sides of the paper. After printing one side, turn the ejected page over, and print on the other side. Fit-to-page Printing The document is automatically resized to fit the paper size. When using this function, ensure that you correctly specify the Printer Paper Size. Destination Select the print output destination. Printer is the usual selection.
Printer Driver Functions (Macintosh) Register Settings Dialog Box To open the Register Settings dialog box, click the Apply... button in the Print dialog box. (1) (1) (2) (3) (4) (5) (2) (3) (4) (5) Settings Displays a list of the registered print settings. Import Imports a set of print settings. To use the settings, select the desired settings in the Settings list and click the Import button. Apply Saves the settings currently specified in the Print dialog box.
Printer Driver Functions (Macintosh) BJ Print Monitor The BJ Print Monitor allows you to check the progress of print jobs. You can launch the BJ Print Monitor if background printing is enabled in the Chooser utility. ■ Opening the BJ Print Monitor 1 Select Chooser from the Apple menu. 2 Set Backgrounding to On. 3 After starting a print job, select BJ Print Monitor in the Application menu. The BJ Print Monitor launches.
Printer Driver Functions (Macintosh) ■ BJ Print Monitor Functions ... Click to pause printing of the specified document. ... Click to resume printing. ... Click to cancel printing of the specified document. Displays the printer status. If an error occurs, instructions are displayed. Displays the printer status and ink status with images. Displays information about the documents queued for printing. The BJ Print Monitor allows you to change the print order of documents queued for printing.
Printer Driver Functions (Macintosh) Cancelling a Print Job When the BJ Print Monitor is running, you can use it to cancel or suspend the currently printing job. 1 Select BJ Print Monitor in the Application menu. 2 Click the name of the print job you wish to cancel, then click . The document selected in the Print Monitor is deleted from the print list and the print job is cancelled. Note ➤ To suspend printing, click the name of the document being printed then click . To resume printing, click .
Printer Driver Functions (Macintosh) Using the Printer with a Network The printer can be used with an Ethernet network environment. Follow the steps described below to connect the printer to the network. ■ Before Setting up the Printer • Install the printer driver on each network computer that will use the printer. For information on installation, refer to the Quick Start Guide. • Use a USB cable to connect the printer to the computer that will function as the print server.
Printer Driver Functions (Macintosh) 4 Click Share. 5 Confirm that S820D server is selected in Enter new print server name then click Send. 6 Confirm that the new print server name has been added to Current print servers then click Close. 7 Click the close box to close the Chooser. • Client setup procedure 1 Select Chooser in the Apple menu. 2 Select Active in AppleTalk. 3 Select the S820D (Server) icon, then select the printer server in Connected to.
Printer Driver Functions (Macintosh) ■ Checking Print Status • Checking print status from the print server To check the status of a print job from the print server, start the BJ Print Monitor. Select BJ Print Monitor in the Application menu. To close the BJ Print Monitor, select Close Status Window in the File menu. • Checking print status from a client To check the status of a print job from a client, start the BJ Status Monitor. Click the BJ Status Monitor icon in the BJ Extras folder.
Printer Driver Functions (Macintosh) ■ BJ Status Monitor Functions .... Click to pause printing of the specified document. .... Click to resume printing. .... Click to cancel printing of the specified document. Note ➤ • You can determine the owner of a computer by selecting the File Sharing control panel and checking the Owner Name item. • If you are using two or more printer servers, you can switch between the BJ Status Monitor displays.
Printer Driver Functions (Macintosh) Uninstalling Printer Drivers When a printer driver is no longer needed, use the Installer to delete all the program files associated with it. Before proceeding, ensure that you save any unsaved files in any currently running applications. Note 1 Load the Setup Software & User's Guide CD-ROM. 2 Double-click the Printer Driver folder. 3 Double-click the Installer icon. 4 When the Software License Agreement is displayed, click Accept, if you agree.
Using the Memory Card Startup Utility (Windows) Using the Memory Card Startup Utility (Windows) • Starting the Memory Card Startup Utility • Setting the Application to Be Started • Deleting the Memory Card Startup Utility 63
Using the Memory Card Startup Utility (Windows) Starting the Memory Card Startup Utility Use the Memory Card Startup Utility (installed on your computer) to change the settings when you insert a memory card or to change the read/write mode of the card slot. Normally, the Memory Card Startup Utility starts automatically when you insert a memory card. To start it manually, follow the instructions below. Note ➤ • Always use the Memory Card Startup Utility to eject a memory card.
Using the Memory Card Startup Utility (Windows) 1 Double-click the " " icon found on the right side of the task bar. The Memory Card Startup Utility is displayed. Start an application. Starts an application. Depending on the application, the contents of the memory card may be displayed. View card contents in Explorer. Displays a list of the files stored on the memory card within Windows Explorer.
Using the Memory Card Startup Utility (Windows) Eject the Memory Card. When selected, the indicator lamp starts blinking, a message will appear, and the printer gets ready for memory card ejection. When the indicator lamp goes off, press the Eject button and remove the memory card. Note ➤ If you are using Windows XP or Windows 2000, the computer recognizes the card slot as a removable disk.
Using the Memory Card Startup Utility (Windows) Do not display this dialog when a card is inserted. When this check box is selected, this screen is not displayed even when a memory card is inserted. Close Closes the Memory Card Startup Utility.
Using the Memory Card Startup Utility (Windows) Setting the Application to Be Started Set the application to be started whenever a memory card is inserted or Start an application is clicked. 1 Open the Memory Card Startup Utility, and then click Auto-Start Properties. ➡ Starting the Memory Card Startup Utility The Auto-Start Properties dialog box is displayed. 2 Specify Start Settings, and then click the OK button.
Using the Memory Card Startup Utility (Windows) Start the appropriate application [recommended]. When you select this option, the system automatically identifies the type of data stored in the memory card and starts the appropriate application. When this option is not selected, the specified application is not started even if the memory card contains that type of data.
Using the Memory Card Startup Utility (Windows) Always start the same application. When you select this option, the system always starts same application regardless of the type of data stored on the memory card. Note ➤ To change the application to be started, click the Change the application button in the Auto-Start Properties dialog box, and select the application to be started.
Using the Memory Card Startup Utility (Windows) Deleting the Memory Card Startup Utility Delete the Memory Card Startup Utility following the procedure below: 1 Click the Start button, and select Settings and then Control Panel. If you are using Windows XP, the deletion procedure is as follows: Click the Start button, and then select Control Panel. The Control Panel is displayed. 2 Double-click Add/Remove Programs. 3 Select Memory Card Startup Utility, and click Add/Remove.
Using the Memory Card Startup Utility (Windows) Perform the subsequent operations as instructed on the screen.
Using the Memory Card Utility (Macintosh) Using the Memory Card Utility (Macintosh) • Starting the Memory Card Utility • Setting the Application to Be Started • Deleting the Memory Card Utility 73
Using the Memory Card Utility (Macintosh) Starting the Memory Card Utility Use the Memory Card Startup Utility (installed on your computer) to change the settings when you insert a memory card or to change the read/write mode of the card slot. Normally, the Memory Card Startup Utility starts automatically when you insert a memory card. To start it manually, follow the instructions below. Note ➤ • Before you eject a memory card, be sure to discard the " " icon into the Trash.
Using the Memory Card Utility (Macintosh) 1 In the Apple menu, click BJ Utility. The Memory Card Utility is displayed. Start an application. Starts an application. Depending on the application, the contents of the memory card may be displayed.
Using the Memory Card Utility (Macintosh) Change the drive’s read/write attribute. Displays the Driver Settings dialog box where you can change the mode (Read-only mode, or Read/write enabled mode) of the card slot by following the on-screen instructions. By default, the mode is set to read only. Be sure to eject the memory card before you change the mode. Auto-start an application when a card is inserted./Do nothing when a card is inserted.
Using the Memory Card Utility (Macintosh) Setting the Application to Be Started Set the application to be started whenever a memory card is inserted or Start an application. is clicked. 1 Open the Memory Card Utility, and click Auto-start an application when. ➡ Starting the Memory Card Utility The Auto-Start Properties dialog box is displayed. 2 Specify Start Settings, and then click the OK button.
Using the Memory Card Utility (Macintosh) Start the appropriate application. When you select this option, the system automatically identifies the type of data stored in the memory card and starts the appropriate application. When this option is not selected, the specified application is not started, even if the memory card contains that type of data.
Using the Memory Card Utility (Macintosh) Always start the same application. When you select this option, the system always starts same application regardless of the type of data stored on the memory card. Note ➤ To change the application to be started, click Change the application in the Auto-Start Properties dialog box, and select the application to be started.
Using the Memory Card Utility (Macintosh) Deleting the Memory Card Utility If you no longer need the Memory Card Utility, you can use the Uninstall function to delete the utility. Note ➤ If an application software is operating and there are files that have not been saved, be sure to save those files before you delete the Memory Card Utility. 1 Insert the Setup Software & User’s Guide CD-ROM into the CD drive, and open the Memory Card Utility folder. 2 Double-click the BJ Uninstaller icon.
Using the Memory Card Utility (Macintosh) 4 If a message like the one below is displayed, click the Restart now button.
Using the Memory Card Utility (Macintosh) 5 Restart the computer to delete the Memory Card Utility.
Routine Maintenance Routine Maintenance • When to Replace Ink Tank and Maintain Printhead • Replacing an Ink Tank • Printing the Nozzle Check Pattern • Printhead Cleaning • Printhead Deep Cleaning • Cleaning the Printer • Transporting the Printer 83
Routine Maintenance When to Replace Ink Tank and Maintain Printhead When an ink tank is empty, it must be replaced. The BJ Status Monitor (Windows) or the BJ Print Monitor (Macintosh) will initially advise you of a low ink level. At this stage, you can still continue to print. Once an ink tank is empty, the BJ Status Monitor (Windows) or the BJ Print Monitor (Macintosh) will tell you to replace the ink tank. Attempting to print causes the POWER lamp to flash four times.
Routine Maintenance Replacing an Ink Tank When replacing an ink tank, check the model number very carefully. The printer will not print properly if an incorrect ink tank is used, or installed in an incorrect position. With this printer, ink tanks must be installed from the right in the order indicated below.
Routine Maintenance 2 Remove the empty ink tank. Push the tab and remove the ink tank. Do not touch the lock lever; remove only the ink tank. Important ➤ • Handle ink tanks carefully to avoid staining clothing or the surrounding area. • Discard empty ink tanks according to the local laws and regulations regarding disposal of consumables.
Routine Maintenance 3 Unpack the new ink tank and pull off the orange tape. Discard the pastic wrapper.
Routine Maintenance 4 Remove the orange protective cap from the bottom of the ink tank. Never press here! Ink may squirt out of the tank. Important ➤ • Do not re-attach the protective cap once you have removed it. • Once you have removed the protective cap, do not touch the open ink port.
Routine Maintenance 5 Insert the ink tank in the printhead holder. Press on the "PUSH" mark until the ink tank snaps firmly into place. 6 Close the front cover. The printhead holder moves to the right. The ink tank installation process is now complete. Note ➤ • To maintain optimal print quality, use an ink tank within six months of first use. • Once an ink tank has been used, do not remove it from the printer and leave it out in the open.
Routine Maintenance Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink sprays normally from the printhead nozzles, and to verify printhead alignment. Use this function when printed results are blurred or the color is incorrect. Nozzle check pattern printing can be started from the Windows and Macintosh printer drivers, or from the printer itself.
Routine Maintenance Macintosh 1 With the printer on, load a sheet of Letter or A4 paper in the printer. 2 Open the Page Setup dialog box. The Page Setup dialog box can normally be opened by selecting Page Setup... in the File menu. 3 Click the Utilities button to open the Printer Utilities dialog box. 4 Select Test Print from the pull-down menu, and then click the Nozzle Check icon. 5 When the confirmation message is displayed, click OK.
Routine Maintenance ■ Printing the Nozzle Check Pattern through the Printer 1 With the printer on, load a sheet of Letter or A4 paper in the printer. 2 Hold the RESUME/CANCEL button down until the POWER lamp flashes twice.
Routine Maintenance ■ Examining the Nozzle Check Pattern The nozzle check pattern should appear as follows when ink is discharged properly. Examine the nozzle check pattern output by the printer. Lines missing here indicate the printhead requires cleaning. Unevenness in these patterns indicates the printhead requires alignment.
Routine Maintenance Printhead Cleaning Clean the printhead if you suspect that the nozzles might be clogged. Printhead cleaning can be performed either from the printer drivers or from the printer itself. Note ➤ Cleaning the printhead consumes ink, so perform printhead cleaning only when necessary. ■ Cleaning the Printhead from the Printer Drivers Windows 1 Ensure that the printer is on. 2 Open the Printer Properties dialog box.
Routine Maintenance Macintosh 1 Ensure that the printer is on. 2 Open the Page Setup dialog box. The Page Setup dialog box can normally be opened by selecting Page Setup... in the File menu. Note 3 Click the Utilities button to open the Printer Utility dialog box. 4 Select Cleaning from the pull-down menu, and then click the Cleaning icon. 5 When the confirmation message appears, click OK.
Routine Maintenance ■ Cleaning the Printhead from the Printer 1 Ensure that the printer is on. 2 Hold down the RESUME/CANCEL button until the POWER lamp flashes once. Now the POWER lamp starts flashing and print head cleaning begins. Do not perform any other operations until the head cleaning finishes. After printhead cleaning finishes, print the nozzle check pattern to verify that the printhead is clean. If not, repeat printhead cleaning.
Routine Maintenance Printhead Deep Cleaning If print quality does not improve by standard printhead cleaning, try deep cleaning, which is a more powerful process. Perform printhead deep cleaning from the printer driver. Note ➤ Printhead deep cleaning consumes more ink than standard printhead cleaning, so perform this procedure only when necessary. Windows 1 Ensure that the printer is on. 2 Open the Printer Properties dialog box.
Routine Maintenance Macintosh 1 Ensure that the printer is on. 2 Open the Page Setup dialog box. The Page Setup dialog box can normally be opened by selecting Page Setup... in the File menu. 3 Click the Utilities button to open the Printer Utility dialog box. 4 Select Cleaning from the pull-down menu, and then click the Deep Cleaning icon. 5 Click OK. Now the POWER lamp starts flashing and print head deep cleaning begins.
Routine Maintenance Cleaning the Printer During normal printing, ink and small scraps of paper accumulate in the printer. When the accumulated debris becomes clearly visible, clean the printer by the following procedure. 1 Turn the printer off. 2 Ensure that the POWER lamp is off and unplug the printer. Caution ➤ Always ensure that you unplug the printer before cleaning the printer to avoid an electric shock.
Routine Maintenance 3 Open the front cover, and wipe the interior of the printer with a dry cloth. Wipe away any stray drops of ink, scraps of paper, and dust. Pay special attention to cleaning the black panel that can easily become dirty. Do not touch any of the printer's internal components, such as the Ink Absorber. Warning ➤ Do not use any flammable solvents, such as paint thinner, benzene or alcohol.
Routine Maintenance Transporting the Printer Pack the printer carefully in its original packing materials. If you do not have the original packing materials, pack the printer carefully and thoroughly in protective material and place inside a sturdy box. 1 Turn the printer off. 2 After making sure that the POWER lamp is off, unplug the printer. Important ➤ Do not unplug the printer while the POWER lamp is lit or flashing to protect the printer from damage.
Routine Maintenance 3 Remove the paper rest and the paper output tray. 4 Disconnect the printer cable from the computer, and then disconnect the power cord from the printer.
Routine Maintenance 5 Secure the printer with adhesive tape, as shown, and then pack it in a plastic bag.
Routine Maintenance 6 Attach protective material to both sides of the printer when packing the printer. Clearly label the box as "Fragile," if using a transport company.
Printing Media Printing Media • Compatible Media Types • Envelopes • High Resolution Paper • Glossy Photo Paper • High Gloss Photo Film • Glossy Photo Cards • Photo Paper Pro • Photo Paper Pro (Borderless) • Transparencies • T-Shirt Transfers • Banner Paper 105
Printing Media Compatible Media Types You can use the following types of paper and other media. ■ Size • Standard paper: From A5 size (5.83 x 8.27 in / 148.0 x 210.0 mm) to legal size (8.5 x 14.0 in / 215.9 x 355.6 mm) • Non-standard paper: From 3.54 x 4.72 in to 8.5 x 23.0 in (From 90.0 x 120.0 mm to 215.9 x 584.2 mm) • Others: Envelopes (US Com. #10 and European DL) Important ➤ Do not use the following types of paper.
Printing Media ■ Weight 17 to 28 lb (64 to 105 g/m2) Do not use paper heavier than this (except for supported Canon-brand media), as it could jam in the printer. ■ Types The following types of media can be used. For more information about the media and the printing methods, refer to the specific sections. Plain paper: Refer to the Quick Start Guide.
Printing Media Envelopes Use either US Com. #10 or European DL size envelopes. ■ Preparation for Printing 1 Press down on all four corners and edges of the envelopes to flatten them as shown below. 2 If the envelopes are curled, hold the opposite corners and gently bend them in the opposite direction. Ensure that the flap of the envelope is perfectly straight.
Printing Media 3 If the leading edge of an envelope is puffed up or curled, use a pen to press the envelope flat and sharpen the crease. Press the envelope completely flat, working from the middle to the edge. * The above illustrations show a side view of the leading edge of the envelope. The envelopes may jam in the printer if they are not completely flat and the edges are not aligned. Ensure that no curl or puff exceeds 0.2 in (5 mm).
Printing Media ■ Loading • Place envelopes lengthwise with the flap to the left and the address side facing upwards. • Set the Paper Thickness Lever to the right. • Up to 10 envelopes can be loaded at once. Paper Thickness Lever Note ➤ If even after removing any curl in the envelopes they still will not feed properly, clean the paper feed roller. 1 Ensure that the printer is turned on. If any paper is loaded in the printer, remove the paper.
Printing Media The paper roller will rotate ten times as it cleans. Repeat this operation three times. 3 4 Load a sheet of Letter or A4 plain paper in the printer. Hold down the RESUME/CANCEL button; when the POWER lamp flashes three times, release the RESUME/CANCEL button. The paper that is loaded in the printer will feed through the printer and be ejected. Repeat this operation three times.
Printing Media High Resolution Paper This type of paper provides better color reproduction than plain paper. It is suitable for printing business documents that feature graphics, and for photographs. ■ Loading • Load the paper with the whiter side facing up. • Set the Paper Thickness Lever to the left. • Do not load paper higher than the limit mark. A maximum of 80 sheets can be loaded.
Printing Media ■ Printer Driver Settings • Media Type: • Page Size: High Resolution Paper Ensure that the setting matches the size set in the application. ■ Handling of Printed Output Do not stack more than 50 sheets in the paper output tray. If the output paper is curled, it may prevent the next sheet being ejected. In this case, or if the ink takes a long time to dry, remove each sheet as soon as it is printed.
Printing Media Glossy Photo Paper This media is thicker than High Resolution Paper with a glossy printing surface to produce printouts close to photograph quality. ■ Loading • • • • Load only one sheet at a time. Load the paper with the whiter side facing up. Set the Paper Thickness Lever to the left. Do not use the loading support sheet provided with the package.
Printing Media ■ Printer Driver Settings • Media Type: • Page Size: Glossy Photo Paper Ensure that the setting matches the size set in the application. ■ Handling of Printed Output • Remove each sheet as soon as it is printed. • Do not touch the printed surface until the ink is fixed (approx. two minutes). ■ Printable Area With some images the trailing edge of the image may be blurred if printing extends out of the printable area. Canon recommends that you print within the printing area.
Printing Media High Gloss Photo Film This film has an extremely glossy surface, ideal for printing photographs with outstanding results. ■ Loading • • • • Load only one sheet at a time. Load the film with the cut corner at the upper right. If the film is curled, flatten it by curling in the opposite direction. Set the Paper Thickness Lever to the left.
Printing Media ■ Printer Driver Settings • Media Type: • Page Size: High Gloss Photo Film Ensure that the setting matches the size set in the application. ■ Handling of Printed Output • Remove each sheet as soon as it is printed. • Do not touch the printed surface until the ink dries. ■ Printable Area With some images the trailing edge of the image may be blurred if printing extends out of the printable area. Canon recommends that you print within the printing area.
Printing Media Glossy Photo Cards This photo-size paper is intended for printing images that cover the entire surface of the card, without a white border. When printing, use the original application software, ZoomBrowser EX/PhotoRecord (for Windows) or ImageBrowser (for Macintosh). This media is available to print from the operation panel. ■ Loading • • • • Load the paper with the glossy side facing up. Set the Paper Thickness Lever to the left. A maximum of 20 sheets can be loaded at once.
Printing Media ■ Handling of Printed Output • Do not stack more than 20 sheets in the paper output tray. • Do not touch the printed surface until the ink dries (approx. two minutes).
Printing Media Photo Paper Pro This is thick paper with a treated surface that enhances gloss and provides superior color reproduction. It is ideal for printing high quality photographs. This media is available in Letter or A4 and 4 × 6 sizes. ■ Loading • Load only one sheet of Letter or A4 at a time, or 20 sheets of 4 × 6 paper at a time. • Load the paper with the glossier side facing up. • Set the Paper Thickness Lever to the left.
Printing Media ■ Printer Driver Settings • Media Type: • Page Size: Photo Paper Pro Ensure that the setting matches the size set in the application. ■ Handling of Printed Output • Remove each sheet as soon as it is printed. • Do not touch the printed surface until the ink is fixed (approx. 30 minutes). Colors in dark images may appear indistinct at first, but become clearer after about 30 minutes. • Images may smudge if you place them in an album before the ink is completely dry.
Printing Media ■ Printable Area With some images the trailing edge of the image may be blurred if printing extends out of the printable area. Canon recommends that you print within the printing area. ➡ Printing Area Note ➤ For photograph and illustration data that you want to print with Borderless Printing, create the data by using the same size as the paper size, and paste the data so that it fills the editing screen without leaving any margins.
Printing Media Photo Paper Pro (Borderless) Made of the same material as the paper described previously, this photo-size paper is intended for printing images that cover the entire surface of the card, without a white border. When printing, use the original application software, ZoomBrowser EX/PhotoRecord (for Windows) or ImageBrowser (for Macintosh). This media is available to print from the operation panel. ■ Loading • Load the paper with the glossy side facing up.
Printing Media ■ Handling of Printed Output • Do not stack more than 20 sheets in the paper output tray. • Do not touch the printed surface until the ink is fixed (approx. 30 minutes). Colors in dark images may appear indistinct at first, but become clearer after about 30 minutes. • Images may smudge if you place them in an album before the ink is completely dry. It is recommended that you allow the ink to dry for 24 hours.
Printing Media Transparencies This film is ideal for printing presentation material for use with overhead projectors. ■ Loading • Place one sheet of plain Letter or A4 paper under the transparencies in the sheet feeder. • Set the Paper Thickness Lever to the left. • A maximum of 30 sheets can be loaded at once.
Printing Media • You can print on either side of this media. However, for best results print on the side that curls in when you hold the short side of the paper. Print Side ■ Printer Driver Settings • Media Type: • Page Size: Transparency Ensure that the setting matches the size set in the application. ■ Handling of Printed Output • Remove each transparency as soon as it is printed. • Do not touch the printed surface until the ink is fixed (approx. 15 minutes).
Printing Media T-Shirt Transfers This paper is used to produce iron-on transfers. The image is printed backwards when Media Type is set to T-Shirt Transfer in the printer driver. Note ➤ For the customers in the United States, refer to the instructions provided with the T-Shirt transfer paper. ■ Loading • • • • Load only one sheet at a time. If the T-Shirt transfer is curled, flatten it by curling it in the opposite direction. Load the paper with the side that does not have green lines facing up.
Printing Media ■ Printer Driver Settings • Media Type: • Page Size: T-Shirt Transfer Ensure that the setting matches the size set in the application. ■ Handling of Printed Output • Remove each T-Shirt transfer as soon as it is printed. • The T-Shirt transfer should be used as soon as it is printed. Refer to the supplied instructions for details on how to use this media.
Printing Media Banner Paper This is long paper that consists of consecutive sheets of Letter or A4 size paper, ideal for printing long posters or banners (up to six sheets long). ■ Preparation for Printing • When tearing the banner paper, tear off one more sheet than you actually need to print. • The maximum length for one print job is six sheets, so if you will be printing on six sheets, tear off a seven-sheet length. ■ Loading 1 Set the Paper Thickness Lever to the right.
Printing Media 3 Place the printer where the printed banner output can hang over the edge of the table. Ensure that the ink does not stain the table or floor.
Printing Media ■ Printer Driver Settings • Media Type: • Page Size: Plain Paper When using letter size banner paper: Letter When using A4 banner paper: A4 • Copies: Must be set to "1" to print correctly. • In Windows, select Banner Printing for Printing Type on the Page Setup tab. • On a Macintosh, before creating the document, select Banner Printing in the Page Setup dialog box.
Troubleshooting Troubleshooting • Cannot Install the Printer Driver • Print Quality is Poor or Contains Errors • Printer Does Not Start or Stops During Print Jobs • Paper Does Not Feed Properly or Paper Jams • The POWER Lamp Flashes Orange • An Error Message is Displayed on the Screen • Problems Unique to Windows Windows • Problems Unique to the Macintosh Macintosh 132
Troubleshooting Cannot Install the Printer Driver ■ Follow the installation procedure correctly. Install the printer driver carefully following the procedures described in the Quick Start Guide. If the printer driver was not installed correctly, reinstall it. If you are using Windows, delete the printer driver before reinstalling it.
Troubleshooting ■ If the Installer for the printer driver does not start up automatically when you insert the Setup Software & User’s Guide CD-ROM, double-click My Computer in the Windows screen, for Windows XP, click Start and select My Computer, and then double-click the CD-ROM icon. Windows Note ➤ If you are typing in the file name, you must specify the CD-ROM drive letter and the installation program ("MSetup.exe"). The CD-ROM drive letter is computer dependent.
Troubleshooting Print Quality is Poor or Contains Errors • Cannot Print to End of Job • Colors are Unclear • Meaningless Characters or Symbols are Printed • Printing is Blurred/Colors are Wrong • Straight Lines are Misaligned • Printed Paper Curls or Ink Blots • Back of Paper is Smudged • Printed Surface is Scratched • White Streaks • Colors are Uneven or Streaked Print Quality is Poor or Contains Errors 135
Troubleshooting Cannot Print to End of Job ■ Confirm that the Page Size setting matches the size of the paper loaded in the printer. First, check the Page Size setting in the application. Then check the Page Size setting in the Printer Properties dialog box for Windows or the Page Setup dialog box for Macintosh. ■ Check the amount of the space on the hard disk. You may need to increase the amount of free space by deleting any unnecessary files.
Troubleshooting Colors are Unclear ■ Confirm that the Media Type setting in the printer driver matches the type of paper loaded in the printer. If you are printing a photograph or an illustration from a Windows environment, also increase Print Quality on the Main tab. If you are working in a Macintosh environment, select the Photo or Graphic icon for the Print Mode in the Print dialog box. ■ Confirm the specified ink tank is installed. When an ink tank runs out of ink, replace it with a new one.
Troubleshooting Meaningless Characters or Symbols are Printed ■ If the problem only occurs when printing a specific document, try editing the document and then printing it. If this does not resolve the problem, there may be a problem with your application.
Troubleshooting Printing is Blurred/Colors are Wrong ■ If a specific color does not print, check whether the corresponding ink tank is empty. Replace if necessary. ■ Print the nozzle check pattern to ensure that ink is output correctly. If the nozzle check pattern does not print correctly, clean the printhead. ➡ Printing the Nozzle Check Pattern ➡ Printhead Cleaning If the problem is not resolved after cleaning the print head several times, the printhead may be worn out.
Troubleshooting Straight Lines are Misaligned ■ Align the printhead. Ensure that you align the printhead every time you install a new printhead. Windows 1 Open the Printer Properties dialog box. 2 Click the Maintenance tab. 3 Click Printhead Alignment. Follow the on-screen instructions.
Troubleshooting Macintosh 1 Open the Page Setup dialog box. 2 Click Utilities. 3 Select Test Print from the pull-down menu, and then click Printhead Alignment. Follow the instructions on the screen.
Troubleshooting ■ In the printer driver settings, select a higher print quality setting. Windows 1 Open the Printer Properties dialog box. 2 On the Main tab, click High for the Print Quality setting. Macintosh 1 Open the Print dialog box. 2 For Print Mode, select Manual and then click Details. 3 Click the Quality icon and then drag the Print Quality slide bar to Fine.
Troubleshooting Printed Paper Curls or Ink Blots ■ Use high resolution paper or photo paper to print images that require a lot of ink (i.e., pictures with intense colors or photographs). ■ Reduce the Intensity setting in the printer driver and try printing again. Windows 1 Open the Printer Properties dialog box. 2 On the Main tab, select Manual for Color Adjustment, and then click Set. 3 Drag the Intensity slide bar to adjust the intensity.
Troubleshooting Macintosh 1 Open the Print dialog box. 2 For Print Mode, select Manual and then click Details. 3 Click the Color icon and then drag the Intensity slide bar to set the intensity.
Troubleshooting Back of Paper is Smudged ■ If the next page prints before the ink is dry, enable the Pause Page printer driver setting. You can either remove each printed sheet from the output tray as soon as it is printed, or adjust the Ink Drying Wait Time to pause after each sheet has printed. Windows 1 Open the Printer Properties dialog box. 2 Click the Maintenance tab. 3 Click Custom Settings to open the Custom Settings dialog box.
Troubleshooting Macintosh 1 Open the Page Setup dialog box. 2 Click the Utilities button. 3 Select Custom Settings from the pull-down menu. 4 Select Pause between pages, and then click Send. ■ You may need to clean some internal parts of the printer. Follow the procedure below. 1 Load sheets of Letter or A4 plain paper in the printer. 2 Hold down the RESUME/CANCEL button until the POWER lamp flashes three times, and release the button.
Troubleshooting Printed Surface is Scratched ■ Ensure that you are using suitable paper. • The paper weight must be less than 28 lb (105 g/m2). If you use non-Canon brand paper heavier than 28 lb (105 g/m2), the printhead may scratch the printed surface. Clean the printhead first and print with the correct paper. • The paper must not be curled. This problem can be resolved by simply turning the paper over. ■ Before starting Borderless Printing, check the paper that you are using.
Troubleshooting ■ Reduce the Intensity setting in the printer driver and try printing again. When printing an image with high intensity, the paper may absorb too much ink and become wavy. This may cause the printed surface to become scratched. Windows 1 Open the Printer Properties dialog box. 2 On the Main tab, select Manual for Color Adjustment, and then click Set. 3 Drag the Intensity slide bar to adjust the intensity. Macintosh 1 Open the Print dialog box.
Troubleshooting White Streaks ■ Print the nozzle check pattern to check the ink output. If a specific color does not print in the nozzle check pattern, clean the printhead. ➡ Printing the Nozzle Check Pattern ➡ Printhead Cleaning The problem can also be resolved by aligning the printhead. For details on printhead alignment, refer to "Straight Lines are Misaligned".
Troubleshooting Colors are Uneven or Streaked ■ Increase the print quality setting in the printer driver settings. Windows 1 Open the Printer Properties dialog box. 2 On the Main tab, click High for the Print Quality setting. Macintosh 1 Open the Print dialog box. 2 For Print Mode, select Manual and then click Details. 3 Click the Quality icon and then drag the Print Quality slide bar to Fine.
Troubleshooting ■ Set the halftoning method to Diffusion in the printer driver settings. Windows 1 Open the Printer Properties dialog box. 2 On the Main tab, select Custom for the Print Quality setting, and click Set. 3 Click Diffusion for the Halftoning setting. Macintosh 1 Open the Print dialog box. 2 For Print Mode, select Manual and then click Details. 3 Click the Quality icon and then click Diffusion for the Halftoning setting.
Troubleshooting Printer Does Not Start or Stops During Print Jobs • Printing Does Not Start • Printing Stops Before It is Completed • Printer Moves But Does Not Print • Printhead Holder Does Not Move to the Center Printer Does Not Start or Stops During Print Jobs 152
Troubleshooting Printing Does Not Start ■ Ensure that the printer is turned on. If the POWER lamp is off, press the POWER button. If the POWER lamp is flashing green, the printer is initializing. Wait until the POWER lamp stops flashing. Note ➤ When printing a large amount of data, such as a photo or graphics, it takes longer than usual to begin printing. While the POWER lamp is flashing, the computer processes the data and sends it to the printer. Simply wait until the processing is completed.
Troubleshooting ■ Ensure that the correct printer driver is selected. In Windows, ensure that Canon S820D is selected in the Print dialog box. In Macintosh, ensure that S820D is selected in the Chooser. Note ➤ In Windows, you can set the Canon S820D Photo Printer as the default printer. ■ Ensure that the printer port is set correctly. Windows Set "USBPRNnn" or "USBnnn" ("n" represents a number) as the printer port. 1 Open the Printer Properties dialog box from the Start menu.
Troubleshooting Printing Stops Before It is Completed ■ Check the status of the POWER lamp. When the POWER lamp is flashing green, the printer is processing data. Printing a large amount of data, such as a photo or graphics, takes time for the computer to process the data, during which the printer may appear to not be functioning. In addition, when continuously printing material that uses a large amount of black ink on plain paper, the printer will sometimes pause.
Troubleshooting Printer Moves But Does Not Print ■ Check the ink tanks. If empty, replace them. ■ Ensure that the ink tanks snap into place when you install them. ■ If there is plenty of ink but the printer does not print, clean the printhead. After cleaning the printhead, print the nozzle check pattern to check that ink is being output normally. ➡ Printhead Cleaning ➡ Printing the Nozzle Check Pattern If the problem is not resolved by cleaning the printhead several times, the printhead may be worn out.
Troubleshooting Printhead Holder Does Not Move to the Center ■ Ensure that the printer is turned on. The printhead holder will not move unless the power is on. If the POWER lamp is off, close the front cover and turn the power on. If the POWER lamp is flashing green, the printer is initializing. When the POWER lamp stops flashing, open the front cover again. ■ If the front cover has been left open for a while, close and reopen it.
Troubleshooting Paper Does Not Feed Properly or Paper Jams • Paper Does Not Feed Properly • Paper Jams Paper Does Not Feed Properly or Paper Jams 158
Troubleshooting Paper Does Not Feed Properly ■ Confirm the paper conditions. • If non-Canon brand media, the paper is not too thick (less than 28 lb / 105g/m2). • The number of sheets loaded does not exceed the recommended level. • The paper is not creased, curled or wrinkled. ➡ Compatible Media Types ■ Ensure that the left edge of the paper just touches the paper guide. ■ When printing envelopes, refer to "Envelopes" in "Printing Media," and prepare the envelopes before printing.
Troubleshooting Paper Jams Remove the paper according to the following procedure. 1 Slowly pull the paper out, either from the sheet feeder or from the paper output slot, whichever is easier. If the paper tears and a piece remains inside the printer, open the front cover and remove it. If you cannot pull the paper out, press the POWER button twice to eject the paper automatically. Note 2 After removing all paper, close the front cover.
Troubleshooting The POWER Lamp Flashes Orange An error has occurred in the printer. The number of flashes indicates the type of error, as outlined below. Check the cause and take the appropriate action. ■ Two flashes: Out of paper, paper jam or paper feed error Replace the paper correctly and press the RESUME/CANCEL button. If paper has jammed in the printer, clear the jam and press the RESUME/CANCEL button.
Troubleshooting ■ Six flashes: No printhead installed Install a printhead. ■ Seven flashes: Defective printhead Remove and reinstall the printhead. Also, ensure that the protective cap has been removed. If reinstalling the printhead does not resolve the problem, replace it with a new one. ■ Eight flashes: Waste ink tank almost full The printer has a built-in waste ink tank for the ink used during printhead cleaning. Eight flashes indicates that the waste ink tank is nearly full.
Troubleshooting ■ POWER lamp flashes alternate green and orange: An error that requires contacting the Canon Customer Care Center may have occurred. Turn the printer off and unplug the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem remains, contact the Canon Customer Care Center.
Troubleshooting An Error Message is Displayed on the Screen • Error Writing to USBxxx Windows • Application Error or General Protection Fault • Other Error Messages Windows • Other Error Messages Macintosh Windows An Error Message is Displayed on the Screen 164
Troubleshooting Error Writing to USBxxx Windows ■ Ensure that the printer is turned on. If the POWER lamp is off, turn the printer on. If the POWER lamp is flashing green, the printer is initializing. Wait until the POWER lamp stops flashing. ■ Ensure that the printer is securely connected to the computer. Note ➤ If you are using a switch box or other devices, remove and reconnect the printer directly to the computer and try printing again.
Troubleshooting 2 On the Details tab (or Advanced tab), click Spool Settings and then select Print directly to printer. ■ Verify the printer port status. Note ➤ Verify your printer port status on the Device Manager. For information on the verification operation or correcting errors, refer to the Windows manual.
Troubleshooting ■ Ensure that the printer port setting corresponds to the printer interface connection. Open the Printer Properties dialog box from the Start menu, and click the Details tab (or Ports tab). If USBPRNnn (Canon S820D) or USBnnn (Canon S820D) ("n" represents a number) is displayed, the USB port is selected.
Troubleshooting Application Error or General Protection Fault Windows ■ Ensure that the application program you are using is intended for your operating system. For example, if you attempt to print with a Windows 3.1 application under Windows 98, the application may not function correctly and an error may occur. Use an application program intended for your operating system. ■ If other applications are running, close them to increase available memory and try printing again.
Troubleshooting ■ Check the amount of free space on the hard disk. You may need to increase the amount of free space by deleting any unnecessary files. ■ If the problem only occurs when printing a specific document, try editing the document and then printing it. If this resolves the problem, there may have been a problem in the original document. If the same problem occurs with the edited document, contact the manufacturer of your application. ■ There may be a problem in the printer driver.
Troubleshooting Other Error Messages Windows ■ If the BJ Status Monitor is displayed, follow the on-screen instructions. If an error occurs during printing, the BJ Status Monitor displays the error on the Printer Status tab. Follow the on-screen instructions. In Windows Me or Windows 98, click the Guide tab for action to be taken in response to the error.
Troubleshooting ■ If one of the following messages is displayed outside of the BJ Status Monitor: Could not spool successfully due to insufficient disk space Increase the amount of free space on the disk by deleting any unnecessary files. Could not spool successfully due to insufficient memory Increase available memory by closing any other applications currently running. Printer driver could not be found Uninstall the printer driver and reinstall it.
Troubleshooting Other Error Messages Macintosh ■ If a message with the format "Error No.: Xn" (where "X" represents a letter and "n" represents a number) is displayed: Error No.: X202 Not enough memory for printing. Increase available memory by closing any other applications currently running. Error No.: X203 There is a problem with the printer driver. Uninstall the printer driver and reinstall it. ➡ Uninstalling Printer Drivers Error No.
Troubleshooting Windows Problems Unique to Windows • The BJ Status Monitor is Not Displayed • Cannot Print in Background (Windows Me/Windows 98 only) Problems Unique to Windows 173
Troubleshooting The BJ Status Monitor is Not Displayed ■ Ensure that "Enable bi-directional support for this printer" is selected. 1 Open the Printer Properties dialog box from the Start menu. ➡ Opening the Printer Properties dialog box directly from the Start menu 2 On the Details tab (or Ports tab), click Spool Settings and select "Enable bi-directional support for this printer" (or "Enable bi-directional support").
Troubleshooting Cannot Print in Background (Windows Me/Windows 98 only) ■ Check the amount of free space on the hard disk. Background printing requires a certain amount of disk space. You may need to delete unnecessary files, or disable background printing. ■ Ensure that background printing is enabled. 1 Open the Printer Properties dialog box. ➡ Opening the Printer Properties Dialog Box 2 On the Page Setup tab, click Printer control... and select Background Printing.
Troubleshooting Problems Unique to the Macintosh Macintosh • Jagged Text/Graphics, or Banded Gradations • Cannot Print in Background Problems Unique to the Macintosh 176
Troubleshooting Jagged Text/Graphics, or Banded Gradations ■ Ensure that your application supports Quick Draw. If you are using a PostScript-compatible application, printed text and lines may appear jagged and gradations may appear banded. As S820D Photo Printer is not a PostScript printer but a Quick Draw printer, use an application compatible with Quick Draw for printing.
Troubleshooting Cannot Print in Background ■ Ensure that background printing is enabled. 1 In the Apple menu, select Chooser. 2 Click Backgrounding on. ■ Check the amount of free space on the hard disk. Background printing requires a certain amount of disk space. You may need to remove unnecessary files, or disable background printing.
Specifications Specifications Printing method: Bubble Jet on-demand Printing resolution: 2400 (horizontal) × 1200 (vertical) dpi. max. Print speed (printing with Canon standard pattern): Black printing Fast (Draft): Standard: Color printing Fast (Draft): Standard: Photo printing (PR-101 A4) High (Fine): 4 ppm 3.5 ppm 4 ppm 2.4 ppm 0.47 ppm Print direction: Bi-directional Print width: 8.0 in/203.2 mm max. (for borderless printing: 8.5 in / 216.
Specifications Receive buffer: 80 KB Interface: USB 1.1-compatible Interface connector: USB standard Series B receptacle (USB interface) Recommended printer cable: Material: AWG28 (data wiring pair) or AWG20 to 28 (distribution pair) Type: Twisted-pair shielded cable Length: Up to 6.5 ft (2.0 m) Connectors: USB standard Series B pluggable Acoustic noise level: Approx.
Specifications Power supply: USA/Canada AC 120 V, 60 Hz Europe AC 230 V±10%, 50 Hz Australia AC 240 V, 50 Hz Power consumption: Standby: Printing: 8W 29 W Dimensions (without a paper rest and paper output tray): 16.9 (W) × 11.6 (D) × 7.0 in (H) 430 (W) × 301 (D) × 188 mm (H) Weight: Approx. 11 lb. (5.
Specifications ■ Feed method: Continuous feed through auto sheet feeder For Plain Paper, Envelopes, High Resolution Paper, Glossy Photo Paper, High Gloss Photo Film, Glossy Photo Cards, Photo Paper Pro, Transparencies, T-shirt Transfers, Banner Paper ■ Sheet feeder capacity: Plain Paper (75 gsm) High Resolution Paper Envelopes Glossy Photo Paper High Gloss Photo Film Glossy Photo Cards Photo Paper Pro Photo Paper Pro (Borderless) Transparencies T-Shirt Transfers Banner Paper 100 sheets max.
Specifications ■ Ordinary print media: Regular size: 4" × 6", A4, A5, B5, Letter, Legal, US Com.#10, European DL Custom size: width: 3.54 to 8.5 in (90.0 to 215.9 mm) height: 4.72 to 23.0 in (120.0 to 584.
Specifications ■ Graphic image printing: Data format: Canon extended mode: Raster image format Resolution: Canon extended mode: 600, 1200, 2400 dpi ■ Printhead: Black, Photo Cyan, Photo Magenta, Cyan, Magenta, Yellow: 256 nozzles (1200 dpi) ■ Ink Tanks: Capacity (page): Black (BCI-6BK) Cyan (BCI-6C) Magenta (BCI-6M) Yellow (BCI-6Y) Photo Cyan (BCI-6PC Photo) Photo Magenta (BCI-6PM Photo) approx. 620*1, approx. 1150*2 approx. 980*2 approx. 740*2 approx. 480*2 approx. 430*2 approx.
Specifications ■ Printer driver operating environment: Windows IBM PC/AT-compatible computer running on Windows XP, Windows Me, Windows 2000 or Windows 98. Macintosh Macintosh computer equipped with a USB interface and Mac OS 9.x. ■ Hard disk space: Approx. 15 MB to install on Windows Me and Windows 98, 30 MB on Mac OS, or approx.
Specifications ■ Printing Area To ensure that the best print quality, the printer allows a margin along each edge of media. Printing area (dark blue): Canon recommends that you print within this area. ( ) Printable area (light blue): The area where it is possible to print. However, printing in this area can adversely affect the print quality or the paper feed precision.
Specifications 4" x 6", A4, B5, A5 Note Size Printable Area (width x height) 4" x 6" 3.7 × 5.7 in / 94.8 × 144.4 mm A4 8.0 × 11.4 in / 203.2 × 289.0 mm B5 6.9 × 9.8 in / 175.2 × 249.0 mm A5 5.6 × 7.9 in / 141.2 × 202.0 mm ➤ When printing on Photo Paper Pro and Glossy Photo Paper, selection of "Borderless Printing" enables you to make prints with no margins. However, borderless printing may cause the top and bottom edges of paper to decrease in print quality or become soiled. 0.12 in / 3.
Specifications Letter, Legal Note Size Printable Area (width x height) Letter 8.0 × 10.7 in / 203.2 × 271.4 mm Legal 8.0 × 13.7 in / 203.2 × 347.6 mm ➤ When printing on PR-101 and GP-301/GP-301N, selection of "Borderless Printing" enables you to make prints with no margins. However, borderless printing may cause the top and bottom edges of paper to decrease in print quality or become soiled. 0.12 in / 3.0 mm 1.2 in / 30.5 mm Recommended printing area Printable area 0.2 in / 5.0 mm 0.25 in / 6.
Specifications Envelopes Size Printable Area (width x height) US Com. #10 8.3 × 3.9 in / 211.8 × 98.0 mm European DL 7.5 × 4.1 in / 190.5 × 103.2 mm 0.13 in / 3.4 mm Printable area 0.13 in / 3.4 mm 0.12 in / 3.0 mm 1.04 in / 26.
Specifications Banner Paper Size Printable Area (width x height) Banner Paper Letter: 8.0 × 65.7 in / 203.2 × 1668.4 mm A4: 8.0 × 69.8 in / 203.2 × 1774.0 mm 1.3 in / 33.0 mm 0.12 in / 3.0 mm 0.2 in / 5.0 mm 0.13 in / 3.4 mm 0.13 in / 3.4 mm Min. 2 sheets Max.
Index Index A Application Error 168 B Background printing (Macintosh) Background printing (Windows) Banner Paper BCI-6BK BCI-6C BCI-6M BCI-6PC Photo BCI-6PM Photo BCI-6Y BJ Print Monitor (Macintosh) BJ Status Monitor (Macintosh) BJ Status Monitor (Windows) Booklet Printing Borderless Printing 55 175 129 85 85 85 85 85 85 55 61 32, 170, 174 22 22, 40 191
Index C Cancelling a Print Job (Macintosh) Cancelling a Print Job (Windows) Chooser (Macintosh) Cleaning Cleaning the Printer Client (Macintosh) Compatible Media Types 57 35 55 30, 42, 94 99 59 106 D Deep Cleaning Duplex Printing 30, 97 23, 53 E Envelopes Error Message 108 164, 170, 172 F Fit-to-page Printing Front cover 22, 53 157 G Gamma Correction (Macintosh) General Protection Fault Glossy Photo Cards Glossy Photo Paper 51 168 118 114 192
Index H High Gloss Photo Film High Resolution Paper 116 112 I Ink Tank 84, 85 M Media Type (Macintosh) Media Type (Windows) Memory Card Setup Utility 44 19 64 Network (Macintosh) Nozzle Check Pattern 58 93 Opening the Printer Properties Dialog Box (Windows) 16 N O P Page Setup Dialog Box (Macintosh) Page Size (Windows) Paper feed roller Paper Jams Paper Size (Macintosh) Photo Optimizer PRO (Macintosh) Photo Optimizer PRO (Windows) Photo Paper Pro 39 21 110 160 39 49 27 120, 123 193
Index PICT File (Macintosh) Poster Printing POWER Lamp Print Advisor (Windows) Print Dialog Box (Macintosh) Print Mode (Macintosh) Print server (Macintosh) Printable area Printer Driver (Macintosh) Printer Driver (Windows) Printer port Printer Properties Dialog Box (Windows) Printing Area Printing the Nozzle Check Pattern 53 22, 52 161 20 44 44 58 186 37 15 166, 167 16, 18 186 90 Q Quiet Mode 31 Replacing an Ink Tank 85 R S Simulate illustration (Macintosh) Simulate Illustration (Windows) Specificati
Index T Transparencies Transporting the Printer T-Shirt Transfers 125 101 127 U Uninstalling Printer Drivers (Macintosh) Uninstalling Printer Drivers (Windows) 62 36 V Vivid Photo 27, 49 W When to Replace Ink Tank and Maintain Printhead 84 195
