User Manual • Please read this manual before operating this scanner. • After you finish reading this manual, store it in a safe place for future reference.
READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE 2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for a back-up purpose or copy the SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer and retain the original for a back-up purpose. Except as expressly permitted under the applicable law, any other copying of the SOFTWARE is a violation of this Agreement. You must reproduce and include the copyright notice on the back-up copy.
■ International ENERGY STAR® Office Equipment Program THE ABOVE IS CANON’S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY IN CONNECTION WITH THE SOFTWARE AND ACCOMPANYING DOCUMENTATION. As an ENERGY STAR® Partner, Canon Electronics Inc. has determined that this machine meets the ENERGY STAR® Program guidelines for energy efficiency. The International ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment.
■ Trademarks IF YOU INTEND TO DISCARD THE ORIGINALS OF SCANNED DOCUMENTS, YOU THE CUSTOMER ARE RESPONSIBLE FOR INSPECTING THE SCANNED IMAGES AND VERIFYING THAT DATA IS INTACT. THE MAXIMUM LIABILITY OF CANON ELECTRONICS INC. UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries.
■ RADIO INTERFERENCE REGULATIONS (For 120 V models) Table of Contents This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry Canada. Setup Guide..........................................................................6 Introduction........................................................................10 Symbols Used in This Manual..........
Setup Guide Please read first. Checking the Accessories If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative. Flatbed Scanner Unit 101 USB Cable Type A/Type B (Length: 1.8 m) (2) AC Adapter/Power Cord* (Connected length: 2.6 m) • Items included in this manual are subject to change without notice. • You must keep the machine’s packaging and packing materials for storing or transporting the machine.
Installing the Software Before Installation If you connect a scanner and turn it ON before you install the software, the following wizard screen will appear. If this wizard is displayed, click the [Cancel] button to exit the wizard, and turn the scanner OFF. ● Do not connect the scanners to the computer before installing the software. ● Log on to Windows as an Administrator. ● Close all other applications before installing the software.
Connecting the Scanners to a Computer When connecting the flatbed and the Canon DR-series scanner, do not use the USB cable supplied with the DR-series scanner. Instead, use the two USB cables supplied with the flatbed. If you own multiple Canon DR-series scanners, with the exception of the Canon DR-series scanner connected to the flatbed, do not connect any other scanners to the computer, regardless of compatibility. Proper functioning is not guaranteed if multiple scanners are connected.
Turning the Scanners ON Turn ON the flatbed first, and then turn ON the connected Canon DR-series scanner. This completes the setup.
Introduction Thank you for purchasing the Canon imageFORMULA Flatbed Scanner Unit 101. Please read this manual thoroughly before using the scanner to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference. Symbols Used in This Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety.
Important Safety Instructions ● Avoid exposing the flatbed to rapid changes in temperature. If the room in which the flatbed is installed is cold but rapidly heated, water droplets (condensation) may form inside the flatbed. This may result in a noticeable degradation in scanning quality. ● The following conditions are recommended for optimal scanning quality: Room temperature: 50 °F to 90.5 °F (10 °C to 32.
■ Never disassemble or modify the AC adapter, as this is dangerous. ■ When cleaning the flatbed, turn the power switch OFF and disconnect the power cord from the power supply. ■ Clean the flatbed using a slightly dampened cloth that has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances.
■ Connect the AC adapter only to a power outlet of the rated voltage and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region). ■ When unplugging the power cord, grasp it firmly by its power plug. Do not pull directly on the power cord, as this may damage or expose the cord’s internal wiring, resulting in a fire or electric shock. ■ Leave sufficient space around the power plug so that it can be disconnected easily.
Names and Functions of Parts A Document Cover Close this to keep documents in place while scanning. You can fold this cover for easy document placement during continuous scanning of multiple small documents. B Scanning Glass C Power Indicator This lights when the flatbed is turned ON and flashes when scanning is in progress. D Stop Button Press this button to stop scan procedures in progress. E Start Button Press this button to start scanning the document placed on the scanning glass.
Documents When Scanning with the Document Cover Folded The flatbed can scan documents ranging from 8.5" (216 mm) to 14.0" (356 mm) in size. The document cover can be set to two positions when folded. Each position exposes an A5R or LTR/A4 size area, respectively, on the scanning glass, enabling easy document placement during continuous scanning of multiple documents.
Scanning Methods When the flatbed scanner unit is connected to a scanner and computer, you can select one of the following methods to scan documents, based on the document type and intended purpose. Flatbed Scanning Limitations • To use the flatbed, you must install the software included on the provided setup disc. (See the Setup Guide page insert of this document.) • The software that operates the connected Canon DR-series scanner (ISIS/TWAIN driver) must also be installed.
Support Not Supported by the Flatbed Function • • • • • • • • • Duplex scanning Folio Reverse side Staple Detection Manual Feeding Verify Count Addon Batch Separation Hi-Speed Text Enhancement • Drop-out color custom • JPEG Transfer • Advanced Text Enhancement • Skip Blank Page • Back-side settings • Double Feed Detection • Imprinter • Patchcode • Speed priority • Auto brightness • Custom color enhance • Rapid recovery system • Prescan • Margin NOTE • When using the Canon DR-series scanner to scan docu
Scanning with Job Functions/CaptureOnTouch 3 Scanning with Job Functions Press the start button on the flatbed. By using Job Registration Tool or the job function in CaptureOnTouch, you can register scanning conditions as jobs. Registered jobs can be executed by pressing the start button on the flatbed. The following software supplied with Canon DR-series scanners is required to use the job function.
Scanning with CapturePerfect You can use the CapturePerfect software provided with the connected Canon DR-series scanner to specify the scanning conditions and saving options before scanning. The following describes how to scan documents with CapturePerfect using the [Scan Batch to File] setting. When you use this scanning method, documents that are scanned one sheet at a time on the flatbed are saved to the same image file. CapturePerfect starts.
3 6 Select the scanner you are using (the name of the connected Canon DR-series scanner should be followed by “w/flatbed”), and click [Settings]. Click [Scanner Setting], and configure the scanner settings. The [Configure Device Settings] dialog box appears. IMPORTANT If the flatbed and the Canon DR-series scanner are connected properly, “w/flatbed” should appear after the scanner name. If only the scanner name appears, try reinstalling the software included on the setup disc provided with the flatbed.
7 11 Place the documents to be scanned, and click [Save] to Configure the [Main Scanner/Flatbed] setting. start scanning. Select [Flatbed] if the document is placed on the flatbed, and select [Main Scanner] if the document is placed in the Canon DR-series scanner. If you select [Auto], the scanner in which the document is placed is detected automatically. 8 IMPORTANT • The method for placing documents differs, depending on the [Feeding Option] setting.
Scanner Settings 13 When scanning is complete, select [Exit] from the [File] When you open the settings dialog box for your scanner while the flatbed is connected, you can configure scan conditions with the following settings. menu to exit CapturePerfect. IMPORTANT Make sure to configure the [Main Scanner/Flatbed] setting first. The settings in the scanner settings dialog box are saved separately for each selection option of the [Main Scanner/Flatbed] setting.
[Mode] [More] Select the scanning mode. Click this to display the settings dialog box for the connected Canon DR-series scanner, and configure advanced scan conditions. For details on settings, refer to the Help for the ISIS/TWAIN driver. [Page Size] Select the page size of the document to be scanned. If you select [Auto-detection], the document size is detected automatically. The [Settings] button is also enabled with this selection.
Other Methods for Scanning Configuring the Feeding Option This section describes the various scanning options. This section describes how to set [Feeding Option] to [PanelFeeding]. Changing the Feeding Option for Scanning 1 Changing the feeding option setting in the scanner settings dialog box can be helpful when scanning multipage documents. The following three feeding options are available: ● [Standard Feeding] This is the standard feeding method.
3 5 6 7 8 Click the [More] button to open the settings dialog box for the Canon DR-series scanner. 9 4 Set [Feeding Option] to [Panel-Feeding]. Click [OK] to close the settings screen. Click [OK] to close the scanner settings dialog box. Place the document in the scanner, and start the scan procedure from the application. Press the start button on the scanner in which the document is placed.
Using Two Scanners Setting [Main Scanner/Flatbed] to [Auto] in the scanner settings dialog box makes it easy to scan certain types of documents with one scanner or the other, or scan using a combination both scanners. Example 1: Scan using the appropriate scanner for each scan operation By configuring the following settings, you can scan documents suited for the flatbed (e.g., a single page of a book) or documents suited for the connected Canon DR-series scanner (e.g.
Troubleshooting Problem 4 Common Problems and Solutions This section provides recommended solutions to common problems. If you have a problem that is not solved by the following, contact your local authorized Canon dealer. Problem 1 Solutions Problem 2 Solutions Problem 3 Solution Solution The flatbed will not turn ON. (1) Confirm that the power switch is set correctly. (2) Confirm that the AC adapter is plugged firmly into a power outlet. The flatbed is not recognized.
Appendix Cleaning the Scanning Glass and Pressure Board Routine Cleaning Clean the flatbed on a regular basis to maintain scanning performance. If streaks appear in scanned images, or if scanned documents become dirty, the scanning glass and pressure board may be dirty. Be sure to clean them regularly. WARNING 1 For safety, always turn the power switch OFF and disconnect the power cord from the power outlet before cleaning the flatbed. Do not use spray-type cleaners to clean the flatbed.
Power Supply (using AC adapter) DC 24 V, 2.2 A Power Consumption Scanning: Maximum 11 W In Sleep mode: Maximum 4.8 W With power turned OFF: Maximum 1 W Noise Not more than 59 dB Operating Environment Temperature: 10°C to 32.5°C (50°F to 90.5°F) Humidity: 20% to 80% RH Specifications Main Unit Type Desktop flatbed Scanning Document Size Width: 8.5" (216 mm) Length: 14.
11.4" (290 mm) 19.8" (504 mm) 3.11" (79 mm) External Dimensions Diagram 20.2" (513 mm) 21.
CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC. 703 WATERFORD WAY, SUITE 400 MIAMI, FLORIDA 33126, U.S.A. CANON AUSTRALIA PTY. LTD. 1 THOMAS HOLT DRIVE, NORTH RYDE, SYDNEY. N.S.W, 2113. AUSTRALIA CANON SINGAPORE PTE. LTD.