User guide

25
Adjusting the Brightness (Brightness)
O You can adjust the brightness of an image within
a range of ±3.
O The larger the + value, the brighter the image
gets. The larger the - value, the darker the image
gets.
O Turning off SELPHY will return the setting to [±0].
O [Brightness] will not be applied if [
Index] is selected in [Page Layout] (p. 23).
Changing the Date Style (Date Format)
02/02/2012 2012/02/02
O You can change the order of the printed date
(p. 22).
O mm/dd/yyyy (Default Setting), dd/mm/yyyy,
yyyy/mm/dd
O The setting will be retained even if SELPHY is turned off or the memory card is removed from the slot.
Saving Energy (Auto Power Down)
O SELPHY turns itself off automatically if it is not operated for approximately 5 minutes.
O On (Default setting) / Off
O If you print multiple images that include images SELPHY cannot print (p. 12), a message [Could not
print some images! Cancel printing?] is displayed and printing stops. If [Auto Power Down] is [On]
and SELPHY is not operated for approximately 5 minutes, SELPHY cancels printing and turns itself
off. If you turn SELPHY back on after the above sequence, a blank sheet may be output. Never
reuse ejected paper (p. 5).
Note that the battery is still consumed after printing stops until the Auto Power Down function takes
effect if you are using the battery (p. 34).
O SELPHY is not turned off automatically when it is connected to a camera or a computer, or an error message is
displayed on the screen.
COPY