User guide
37
Specications
SELPHY CP810
Printing Method Dye-sublimation thermal transfer (with overcoating)
Resolution/Color Representation 300 x 300 dpi
Gradation 256 shades per color
(Resolution based on the “area intensity method” is equivalent to a 4800 x 4800 dpi
color representation)*
1
Ink Dedicated color ink cassette (Y/M/C/overcoating)
Paper Postcard Size, L Size, Card Size (including full page label sheets, 8-label sheets)
Print Size Borderless Bordered
Postcard Size
L Size
Card Size
(Each label on an 8-label sheet)
100.0 x 148.0 mm (3.94 x 5.83 in.)
89.0 x 119.0 mm (3.50 x 4.69 in.)
54.0 x 86.0 mm (2.13 x 3.39 in.)
22.0 x 17.3 mm (0.87 x 0.68 in.)
91.3 x 121.7 mm (3.59 x 4.79 in.)
79.1 x 105.1 mm (3.11 x 4.14 in.)
49.9 x 66.6 mm (1.96 x 2.62 in.)
–
Printing Speed*
2
Printing from memory cards/USB ash memory/Connected to cameras
(PictBridge)
Postcard Size
L Size
Card Size
Approx. 47 sec.
Approx. 39 sec.
Approx. 27 sec.
Feeding System Automatic paper feed from paper cassette
Ejection System Automatic paper ejection on top of paper cassette
Screen Tilt-up, 2.7 type, TFT LCD Color Monitor
Interface
Hi-Speed USB Connecting to a PictBridge compliant device: USB compliant Type A connector
Connecting to a computer: USB compliant Mini-B connector
Memory Cards
CF Card, Microdrive, xD-Picture Card*
3
, SD Memory Card, SDHC Memory Card,
SDXC Memory Card, MMC Card, MMCplus Card, HC MMCplus Card, miniSD
Memory Card*
3
, miniSDHC Memory Card*
3
, microSD Memory Card*
3
, microSDHC
Memory Card*
3
, microSDXC Memory Card*
3
, RS-MMC Card*
3
, MMCmobile Card*
3
,
MMCmicro Card
USB Flash Memory FAT/exFAT only supported
Operating Temperatures 5 – 40 °C (41 – 104 °F)
Operating Humidity 20 – 80%
Power Compact Power Adapter CA-CP200 B
Battery Pack NB-CP2L (Sold Separately)
Charger adapter CG-CP200 (sold separately)
Power Consumption 60 W or less (4 W or less on standby)
Dimensions 178.0 x 127.0 x 60.5 mm (7.01 x 5.00 x 2.38 in.) (excluding protrusions)
Weight (printer only) Approx. 810 g (approx. 28.6 oz.)
*
1
The “concentration gradation method” used by SELPHY allows 256 shades (max) of color to be represented per dot. In
comparison, printers using the area intensity method represent shades by the number of dots printed in a unit of area, i.e.
256 dots (16 dots vertical x 16 dots horizontal) are needed to represent the same 256 shades of color. SELPHY’s color
representation is therefore equivalent to a 4800 x 4800 dpi resolution based on an area intensity method.
• Gradation refers to the number of shades that can be represented on a print. For example, black and white has two
gradations, while 256 gradations include the shades of gray going from white to black that can be represented.
• “dpi” refers to the number of dots that can be printed in 1 inch (“dots per inch”).
*
2
Measured from the start of the yellow printing pass to nal output.
*
3
Special adapter (commercially available) is required.
COPY