T2202D_PPG_US_Cover.fm Page 1 Tuesday, July 20, 2004 4:19 PM Photo Printing Guide The following ink tank is compatible with DS700. For details on ink tank replacement, refer to “Replacing an Ink Tank” in this guide. QA7-3336-V01 XXXXXX ©CANON INC.
T2202D_PPG_US_Cover.fm Page 2 Tuesday, July 20, 2004 4:19 PM Exif Print This printer supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is used and optimized, yielding extremely high quality prints. International ENERGY STAR® Program As an ENERGY STAR® Partner, Canon Inc.
Contents Easy Setup Instructions..................................................................................3 Unpack the Printer ........................................................................................................3 Preparing the Printer.....................................................................................................4 Installing the Print Head ...............................................................................................5 Installing an Ink Tank .
Troubleshooting...........................................................................................64 Nothing is Displayed on TV/Image is Poor ...................................................................64 The Remote Control is not Working..............................................................................65 A Message is Displayed on TV .....................................................................................65 Handling Error Messages .....................................
Easy Setup Instructions Easy Setup Instructions Unpack the Printer Check that all the following items are in the box. If anything is missing or is damaged, contact a Canon service representative. Power Cord Video Cable (RCA) Documentation and Setup Software & User’s Guide CD-ROM Ink Tank BCI-16 Color Remote Control Printer Lithium coin cell battery Print Head note See “Using the Remote Control” on page 9 for instructions on setting the lithium coin cell battery in the remote control.
Easy Setup Instructions Preparing the Printer 1 Place the printer on a flat surface. * Important * During printing, part of the sheet is ejected from the back of the printer. Leave at least 8cm (3.1in), clear space at the back of the printer. 2 Remove the tape from the printer. The tape position is subject to change. 3 4 Plug the power cord into the back of the printer and connect the other end to a power outlet. Press the POWER button. The printer will initialize.
Easy Setup Instructions Installing the Print Head 1 Slide the cover open switch toward the right to open the cover. The print head holder moves to the center. 2 Press the lock button, then raise the lock lever. Do not touch internal parts other than the lock lever. 3 Remove the protective cap from the print head. note • Do not touch the print head nozzles. • Do not attempt to reattach the protective cap once it has been removed. print head nozzles 4 Place the print head in the holder.
Easy Setup Instructions 5 Lock the print head into place by lowering the lever. Press down the lock button until it clicks. Do not touch the lock lever once the print head has been installed. Installing an Ink Tank Caution • For safety reasons, store an ink tank out of the reach of small children. • Do not drop or shake an ink tank as this may cause the ink to leak out and stain your clothes and hands. 1 2 Ink ports Take out the ink tank.
Printer Parts and Their Function Printer Parts and Their Function This section describes the components of the printer, the remote control and the menus displayed when using the printer with a TV. Printer Front View Remote control receiver/ Infrared port Receives the button signal from the remote control or data sent from the mobile phone via infrared communication. Cover Open to replace the ink tank or remove jammed paper.
Printer Parts and Their Function Rear View USB Port Connects the printer to a computer through a USB interface. Power Cord Connection Connector used to connect the supplied power cord. Inside the Printer Video Out Terminal Connects the printer to TV via the supplied video cable. Print Head Lock Lever Locks the print head into the holder. Once the print head is installed, do not touch this lever. Print Head Holder Install the print head here. Paper Thickness Lever Move to the right when printing.
Printer Parts and Their Function (4) Search Button Looks up target photos in the memory card using the shooting date as the search key. See “Searching for Photos with the Shooting Date—Search” on page 35. (9) Rotate Button Rotates the photo displayed on TV 90 degrees. This button is effective even if you are displaying a slide show, or zooming a photo. (5) Settings Button Allows you to set the Paper Size, Paper Type, Bordered/Borderless printing, printing with the date, etc.
Printer Parts and Their Function note Setting or Replacing the Battery Set the battery in the remote control first. Replace the battery in the remote control when the remote control becomes inoperative or its effective range becomes shorter. The lithium coin cell battery CR2025 is available for this remote control. Purchase the commercial battery for replacement. 1 Remove the cover from the back of the remote control. 2 Push down the battery stopper tab and remove the battery from the remote control.
Printer Parts and Their Function Menu Screen The following menu can be selected when a memory card is inserted in the memory card slot and the printer and the TV are connected. You can select the following functions in each menu. Photo Gallery View each photo and print. You can automatically display photos (slide show) on the full TV screen. See “Viewing Each Photo on TV and Printing—Photo Gallery” on page 21. Photo Print Select photos and specify the number of copies to print.
Printer Parts and Their Function Tool Box Displays the following menus. Nozzle check Prints a nozzle check pattern to ensure that ink is output correctly. See “Printing the Nozzle Check Pattern” on page 56. Ink counter reset Resets the ink counter so that it is correctly synchronized with the actual ink level when the ink tank is replaced. See “Resetting the Ink Counter” on page 62. Head cleaning Cleans the print head when nozzles are clogged. See “Print Head Cleaning” on page 57.
Preparation When Using the Printer with the TV Preparation When Using the Printer with the TV Displaying a Photo on TV This section describes the method to connect the printer to the TV with the attached video cable (RCA) and to turn on/off the printer and TV. Connecting to TV 1 Check the following before connecting the printer to the TV. • Both the printer and the TV are turned off. • A battery is installed in the remote control. See “Using the Remote Control” on page 9.
Preparation When Using the Printer with the TV Turning on TV and the Printer for Displaying the Menu Screen Follow the procedure below to turn on TV and the printer. 1 Connect to TV. See “Connect TV to the printer.” on page 13. 2 Turn on TV and the printer. (1) Turn on TV. (2) Press the POWER button. The POWER lamp flashes while the printer warms up and changes to steady (non-flashing) green when the printer is ready. (3) Select the video input mode. The menu screen appears on the TV screen.
Preparation When Using the Printer with the TV Using a Memory Card Let's take a look at different types of memory cards and how to insert and remove them. Memory Cards Supported by this printer Supported memory cards are as follows: Memory Cards which can be inserted directly Memory Cards which can be used through a special adapter • CompactFlash (CF) card • Microdrive * Supports TYPE I/ TYPE II (3.
Preparation When Using the Printer with the TV Inserting a Memory Card Important Insert only a single type of memory card. • If you use a Compact Flash (CF) card or Microdrive Insert it as far as it will go into the slot on the right as shown. Turn on * For xD-Picture Card, use the compliant adapter. • If you use a SmartMedia card Insert it into the slot on the upper left until it stops with its end projecting as shown.
Preparation When Using the Printer with the TV Removing a Memory Card note If you use the printer connected to your computer, follow the instructions for removal of the memory card from the computer. For the procedure, refer to the on-screen User’s Guide. 1 Ensure that the Indicator lamp is not flashing, then remove the memory card. Important Removing the memory card or turning off the printer while the Indicator lamp is flashing can damage the data stored in the memory card.
Preparation When Using the Printer with the TV Loading Paper Print Media to Avoid Do not use the following types of paper. Using such paper will not only produce unsatisfactory results, but can also cause the printer to jam or malfunction.
Preparation When Using the Printer with the TV 3 Prepare to load paper. (1) Slide the cover open switch toward the right to open the cover. (2) Ensure that the paper thickness lever is set to the right. note Set the lever on the left only if ink smudges or the printed surface is stained. (3) Close the cover. 4 Load the paper. (1) Insert the paper into the paper support with print side facing up.
Preparation When Using the Printer with the TV Media Types for Card Direct Printing Media Type Photo Paper Pro Paper support Load Limit Page size Media type 101.6×152.4 mm/ [101.6×152.4 mm]/ [Photo Paper Pro] 4"×6": up to 20 sheets [4"×6"] Photo Paper Plus 101.6×152.4 mm/ [101.6×152.4 mm]/ [Photo Paper Plus Glossy 4"×6": up to 20 sheets [4"×6"] Glossy] Photo Paper Plus 101.6×152.4 mm/ [101.6×152.4 mm]/ [Photo Paper Plus Semi-gloss 4"×6": up to 20 sheets [4"×6"] Glossy] Glossy Photo Paper 101.6×152.
Enjoy Photos on TV and Printing —Basic— Enjoy Photos on TV and Printing —Basic— Viewing and Printing from the TV Overview You can display photos stored in a memory card on TV by connecting printer and TV and inserting the memory card in the printer. You can print your favorite photos one by one, or display a list of the photos and specify the number of copies to print for each photo listed. Viewing Each Photo on TV and Printing—Photo Gallery note Displays photos stored in a memory card on TV.
Enjoy Photos on TV and Printing —Basic— note Menu Screen The Menu screen is displayed when TV and the printer are connected and turned on. Tool Box is the only available menu at the moment. All menu options can be viewed when a memory card with stored photos is inserted into the printer card slot. Press the Menu button to display the Menu screen if the other screen is displayed. • The menu displayed when the power is on. • The menu displayed when a memory card is set.
Enjoy Photos on TV and Printing —Basic— 7 Confirm the settings. (1) Confirm the Page size and Media type. To change any of the settings, press the Settings button. See “Specifying the Paper and Other Settings” on page 33. (2) Press the Copies +/Copies – buttons to specify the number of copies to print. 8 Start printing. (1) Ensure that the paper is loaded in the print confirmation screen. (2) Press the Print button.
Enjoy Photos on TV and Printing —Basic— Specifying the number of copies to print for each photo —Photo Print You can display 9 photos stored in a memory card on the TV screen at a time and specify the number of copies to print for each photo. 1 Prepare to print. (1) Connect TV to the printer and turn them on. See “Connect TV to the printer.” on page 13. (2) Load the paper See “Loading Paper” on page 18. (3) Insert the memory card into the card slot. See “Inserting a Memory Card” on page 16.
Enjoy Photos on TV and Printing —Basic— 3 Specify the number of copies to print. (1) Use the WXST buttons, select the photo you wish to print. (2) Use the Copies +/Copies – buttons to specify the number of copies to print. (3) Repeat steps 1 and 2 and specify the number of copies for each photo you wish to print. (4) Press the Print button. The print confirmation screen is displayed.
Enjoy Photos on TV and Printing —Advanced— Enjoy Photos on TV and Printing —Advanced— Selecting Various Print Option—Print Studio— You can print your favorite photo as a postcard or sticker using Print Studio features.
Enjoy Photos on TV and Printing —Advanced— 2 Select Layout print. (1) Use the buttons to select Print Studio. (2) Press the button. The menu of Print Studio is displayed. (3) Use the buttons to select Layout print and then press the button. The screen for specifying the layout is displayed. 3 Specify the layout. (1) Use the buttons to specify the layout. (2) Press the button. The screen for specifying the paste method is displayed. 4 Select the paste method.
Enjoy Photos on TV and Printing —Advanced— 5 Paste photos one by one. (1) Press the and button to display the photo you want to paste. (2) Press the button. The photo is pasted on the layout. Press the (Back button) to cancel pasting the specified photo. (3) Repeat steps (1) and (2) for each photo you wish to print. (4) Press the (Print button). The print confirmation screen is displayed. note You cannot paste photos on more than one page. Start printing once you have pasted photos on one page.
Enjoy Photos on TV and Printing —Advanced— 1 Select Sticker print. (1) Use the buttons to select Print Studio from the menu screen. (2) Press the button. The menu of Print Studio is displayed. (3) Use the buttons to select Sticker print and then press the button. The screen for specifying the layout is displayed. (4) When printing on the Canon Photo Stickers, select Stickers x 16. The screen for specifying the photo to print is displayed. 2 Select the photo to print.
Enjoy Photos on TV and Printing —Advanced— Printing All Photos You can print all photos saved on a memory card. note When many photos are stored in a memory card, it is convenient to search for photos to display or print using the shooting date as the search key. See “Searching for Photos with the Shooting Date—Search” on page 35. 1 Select Print all. (1) Use the buttons to select Print Studio from the menu screen. (2) Press the button. The menu of Print Studio is displayed.
Enjoy Photos on TV and Printing —Advanced— 3 Install the memory card on the printer. See “Inserting a Memory Card” on page 16. 4 Press the Print all button on the printer. See “Operation Panel” on page 7. Printing is started in order of the recent shooting date. * Press the Print All button on the printer if you want to cancel the printing. Printing a Photo List—Print Index You can print a list of all photos saved in the memory card known as an index print.
Enjoy Photos on TV and Printing —Advanced— Printing According to the settings Made on the Camera —DPOF Printing If DPOF (Digital Print Order Format) settings are made on the camera, photos are printed automatically according to those settings. note • This printer allows you to make the following DPOF settings: – Image format: CIFF, Exif (JPEG), JFIF, and Exif (Tiff) – Print type - Standard: The Photos for which you specified “Standard” using the DPOF function are printed.
Enjoy Photos on TV and Printing —Advanced— Handy Functions and Settings This section describes the functions of the buttons, such as the (Settings button) and the (Search button), used at each printing operation and the common operations, such as to change the language displayed or to set the date display format.
Enjoy Photos on TV and Printing —Advanced— Other Setting Items Basic settings • Page size Select the paper size for the print job. • Media type Select the Media type. note For information on available media types and on setting Page size and Media type, refer to “Media Types for Card Direct Printing” on page 20. • Borderless print Borderless .........Prints on the whole paper without a border. Bordered ...........Prints with a border. • Date print On .....................
Enjoy Photos on TV and Printing —Advanced— Searching for Photos with the Shooting Date—Search When there are many photos stored on the memory card, you can select photos to display or print by specifying the shooting date with the search function. note Displaying/Printing Photos Shot Yesterday Specify the date of yesterday in Start of range and End of range in the search function. • Select Photo Gallery to display photos that were shot yesterday.
Enjoy Photos on TV and Printing —Advanced— Setting the Date Display Format You can change the format of data printing. 1 Select Tool Box from the menu. (1) Use the buttons to select Tool Box from the menu screen. (2) Press the button. (3) Use the button to select Date display format and then press the button. The Date display format screen is displayed. 2 Select Date format. (1) Use the buttons to select date format.
Enjoy Photos on TV and Printing —Advanced— Changing the Language Displayed You can change the language displayed on TV. 1 Select Tool Box from the menu. (1) Use the buttons to select Tool Box from the menu screen. (2) Press the (3) Use the button. button to select languages and then press the 2 button. Select a language for display. (1) Use the language. buttons to select a note Languages are displayed differently depending on region. (2) Press the button.
Enjoy Photos on TV and Printing —Advanced— Resetting All Settings You can reset all settings other than the display language and the print head position to the initial state. 1 Select Tool Box from the menu. (1) Use the buttons to select Tool Box from the menu screen. (2) Press the button. (3) Use the then press the 2 Use the button to select Resetting and button. button to select Yes and then press the button.
Printing Photographs Directly from a Digital Camera Printing Photographs Directly from a Digital Camera Connecting a digital camera or camcorder to printer allows you to print recorded images directly without using a computer. Connect the USB cable that came with your digital camera. note • This printer supports PictBridge.
Printing Photographs Directly from a Digital Camera note • When printing photos with the digital camera connected to the printer, it is advisable to use the AC adapter supplied with the camera. If you use the camera battery, be sure to charge it fully. • Depending on the model or brand of your camera, you may have to select a mode of printing photos in compliance with PictBridge before connecting the camera.
Printing Photographs Directly from a Digital Camera Direct Printing from PictBridge-compatible Digital Cameras When operating the camera, be sure to follow the instructions given in the Instruction Manual supplied with the camera. Let’s take a look at the paper size, paper type, layout, image optimization modes, and date printing modes that can be set on the PictBridge-compatible camera connected to the printer.
Printing Photographs Directly from a Digital Camera About “Layout” When “Default setting” (selections based on the printer setting) is selected, the printer operates based on the “Borderless Printing” setting made using the remote control. When 10×15cm/4"×6" is selected from “Paper size”, “2-up”, “4-up”, “9-up”, and “16-up” options may be available in “Layout”. note Printing on Photo Stickers Specify the Paper size, Paper type, and layout for the Photo Stickers provided by Canon.
Printing Photographs Directly from a Digital Camera Printing Photographs Directly from a Canon Bubble Jet Direct Compatible Digital Camera Let’s take a look at the media types that can be set on the Canon Bubble Jet Direct compatible digital camera. Media Types for Digital Camera When you connect a digital camera, you can use the following media: Digital Camera Setting Media Type Card #1 Photo Paper Pro 4"×6" / 101.6×152.4 mm Card #2 Photo Paper Plus Glossy 4"×6" / 101.6×152.
Printing Photos with Infrared Compatible Mobile Phones Printing Photos with Infrared Compatible Mobile Phones Using this printer, you can print a photo taken with a mobile phone in the specified layout on a specified media through infrared communication. Requirements for Infrared Communication with the Mobile Phone To carry out printing through infrared communication with a mobile phone: – The mobile phone must have an IrDA port and support IrMC ver. 1.1. – Only JPEG images are supported.
Printing Photos with Infrared Compatible Mobile Phones 2 Select Infrared print. (1) Use the buttons to select Tool Box from the menu screen. (2) Press the button. The Tool Box menu is displayed. (3) Use the button to select Infrared print and then press the button. The Infrared print screen is displayed. 3 Select an item to set. (1) Press the and button to select the desired setting item. (2) Press the and button to display the selected item.
Printing Photos with Infrared Compatible Mobile Phones Performing Infrared Printing There are two methods to print a photo taken with a mobile phone via infrared communication. • Printing the photo with the mobile phone and the printer. • Printing the photo by displaying it on TV. When performing infrared communication, also refer to your mobile phone manual.
Printing Photos with Infrared Compatible Mobile Phones Printing a Photo by Displaying it on TV You can display a photo taken with a mobile phone and check the photo in the print confirmation screen before printing. 1 Prepare to print. (1) Connect TV to the printer and turn them on. See “Connect TV to the printer.” on page 13. (2) Load the paper. See “Loading Paper” on page 18. 2 Display a photo taken with a mobile phone on TV. (1) Use the (2) Press the buttons to select Tool Box. button.
Printing Photos with Infrared Compatible Mobile Phones 3 Start Infrared Communication. (1) Align the infrared port of a mobile phone to that of the printer at a distance of less than 7.9 inch (20 cm). See “Start Infrared Communication.” on page 46. (2) Select the photo you want to print and send the data with the infrared file transfer function on the mobile phone. “Receiving a photo from a mobile phone via infrared.” message is displayed if the printer successfully receives data.
Printing with the computer Printing with the computer Installing the Printer Driver Installing the Printer Driver—Windows note • Use a computer equipped on which Windows XP or Windows 2000 can operate. • Do not disconnect the cable or remove the CD-ROM during the installation. The driver cannot be correctly installed. • The screens below refer to Windows XP installation. Screens may differ depending on the operating system you are using.
Printing with the computer note • If the installer in the CD-ROM does not run automatically, click Start and select My Computer, then double-click the CD-ROM icon. For Windows 2000 users, double-click My Computer in the Windows screen, then double-click the CD-ROM icon. • If the language selection screen appears, select a language, then click OK. • If the place selection message appears, select your place of residence, then click Next. 5 Follow the instructions displayed on screen.
Printing with the computer 9 When the “Installation Results” window appears, click OK. note For U.S. customer only Follow the on-screen instructions to register your product. For more information, refer to the attached leaflet. 10 When the “On-screen Manual” screen appears, click Next. 11 When the “Print Head Alignment Recommended” screen appears, click Next. 12 When the “Installation completed successfully” window appears, click Exit.
Printing with the computer 4 Double-click SELPHY DS700 xxx.pkg. note XXX after the model name (SELPHY DS700) is the version number. 5 6 7 8 9 When the “Welcome to the BJ printer driver Installer” screen appears, click Continue. Read the License Agreement and click Continue, then click Agree. Select a destination to where you want to install the printer driver, and click Continue. Click Install. Enter an administrator name and a password, then click OK.
Printing with the computer 13 Double-click Memory Card Utility 300.mpkg. 14 Click Continue. 15 Read the License Agreement and click Continue, then click Agree. 16 Select a destination to where you want to install the memory card utility, and click Continue. 17 Click Install. 18 Enter an administrator name and a password, then click OK. note When you have forgotten the administrator name and/ or password, click mark and follow the instructions in Mac Help.
Printing with the computer How to View the User’s Guide The User’s Guide is the manual displayed on the computer screen. Refer to the User’s Guide when you want to connect the printer to your computer or encounter with a problem that is not described on the Photo Printing Guide. How to View the User’s Guide—Windows 1 Double-click the DS700 User’s Guide short-cut icon on the desktop. note • You can display the User’s Guide from the Start menu.
Printing Maintenance Printing Maintenance When Printing Becomes Faint or Colors are Incorrect When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, the print head nozzles are probably clogged. Follow the procedures below to clean the nozzles. Step 1 “Printing the Nozzle Check Pattern” on page 56 If the pattern is printed normally, select All A. After print head cleaning, print the nozzle check pattern. If the print quality is poor, perform print head cleaning.
Printing Maintenance Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. Use this function when printed results are blurred or the color is incorrect. 1 Prepare to print. (1) Connect TV to the printer and turn them on. See “Connect TV to the printer.” on page 13. (2) Load the supplied paper or Canon 4"×6"/ 101.6×152.4mm paper into the paper support. See “Loading Paper” on page 18. 2 Print the Nozzle Check Pattern.
Printing Maintenance Print Head Cleaning Clean the Print Head if white stripes appear in the nozzle check pattern. Cleaning the Print Head consumes ink, so perform Print Head Cleaning only when necessary. 1 Connect TV to the printer and turn them on. See “Connect TV to the printer.” on page 13. 2 Start Print Head Cleaning. (1) Use the buttons to select Tool Box from the menu screen and then press the button. (2) Use the button to select Head Cleaning and then press the button.
Printing Maintenance Print Head Deep Cleaning If print quality does not improve by standard print head cleaning, try print head deep cleaning, which is a more powerful process. Print head deep cleaning consumes ink, so perform this procedure only when necessary. 1 Prepare settings. Connect TV to the printer and turn them on. See “Connect TV to the printer.” on page 13. 2 Start Print Head Deep Cleaning. (1) Use the buttons to select Tool Box from the menu screen and then press the button.
Printing Maintenance Aligning the Print Head If print quality is poor, adjust the print head position. It may solve the problem. 1 Prepare to print. (1) Connect TV to the printer and turn them on. See “Connect TV to the printer.” on page 13. (2) Load the supplied paper or Canon 4"×6"/ 101.6×152.4mm paper into the paper support. See “Loading Paper” on page 18. 2 Print the Pattern. (1) Use the buttons to select Tool Box from the menu screen and then press the button.
Printing Maintenance (3) Press the button. The print head position is adjusted. note Printing the current setting of the print head position 1 Connect TV to the printer and turn them on. See “Connect TV to the printer.” on page 13. 2 Load the supplied paper or Canon 4"×6"/101.6 x 152.4mm Size paper into the paper support. 3 Select Tool Box and then press the button. 4 Select Head alignment print and then press the button. The pattern print confirmation screen is displayed.
Printing Maintenance 2 Remove the empty ink tank. (1) Push the tab. (2) Remove the ink tank. Important • Handle ink tanks carefully to avoid staining clothing or the surrounding area. • Discard empty ink tanks according to the local laws and regulations regarding disposal of consumables. 3 Prepare a replacement ink tank. (1) Unpack a new ink tank and remove the orange protective cap. Important • Do not re-attach the protective cap once you have removed it.
Printing Maintenance note • To maintain optimal print quality, use an ink tank within six months of its first use. • Once an ink tank has been used, do not remove it from the printer and leave it out in the open. This will cause the ink tank to dry out and the printer may not function properly if it is reinstalled. • Color ink is consumed in the head cleaning and deep cleaning, which are necessary to maintain the printer’s capabilities.
Printing Maintenance How Low Ink Warning Setting Works The low ink warning notifies you of low ink levels during printing. The Low Ink Warning has been preset to be automatically displayed. When you reset the ink counter, it will assume that the ink tank is full regardless of how much ink actually remains. The reset is the only way to match the counter value with an actual ink volume. Reset the ink counter when installing a new ink tank.
Troubleshooting Troubleshooting Let's take a look at countermeasures against problems which may occur during use of the printer. note Here, we will discuss errors indicated on TV, problems that might occur during direct printing from the digital camera. If you cannot find the symptom corresponding to a certain problem, refer to the User’s Guide.
Troubleshooting The Remote Control is not Working Possible Cause Try This The distance between the remote control and the printer is too long/ there is an obstruction • Aim the remote control at the remote control receiver on the printer and bring it closer. • Remove the obstruction if there is any impediment between the remote control and the printer. • The remote control may operate improperly if strong light such as sunlight hits the remote control receiver.
Troubleshooting Message/Error Try This Error code Disconnect the cable from the printer, and then turn the printer off and unplug the printer from the power supply. After waiting 10 minutes, plug the power cord back in and turn on the printer. If the same error persists, contact a Canon service representative. * The waste ink absorber absorbs ink used at cleaning.
Troubleshooting Handling Error Messages When a printer error occurs, the POWER lamp flashes. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error. Number of Flashes Possible Cause Try This Two flashes Printer is out of paper Reload paper and press the RESUME/CANCEL button. Three flashes Paper jam If a paper jam occurs, clear the jammed paper; reload paper in the printer, then press the RESUME/CANCEL button.
Troubleshooting note POWER lamp flashes alternately green and orange An error that requires contacting a Canon service representative may have occurred. Disconnect the cable from the printer, and then turn the printer off and unplug the printer from the power supply. After waiting 10 minutes, plug the power cord back in and turn on the printer. If the problem remains, contact a Canon service representative.
Troubleshooting Printing is Blurred/Colors are Wrong/White Streaks appear Possible Cause Try This Ink tank is not installed If an ink tank is not installed, install it. If an ink tank is installed, push the PUSH mark on the ink tank to ensure it has snapped firmly into place. Media type is not selected properly Ensure that the media type selected in the Settings screen is the same type as the media type loaded on the printer. See “Specifying the Paper and Other Settings” on page 33.
Troubleshooting Printed Surface is Scratched or Ink Blots Possible Cause Try This There are ink blots on the printed surface. Clean the paper feed roller. See “Paper Does Not Feed Properly” on page 68. There are ink blots on the back side of the printed surface. If the protrusions inside the printer are stained, open the cover of the printer and then wipe ink off the protrusions using a swab or the like as shown. Important Before cleaning, be sure to turned off the printer.
Troubleshooting Possible Cause Try This Curled paper used If all four corners or the printing surface of the paper is curled, the paper may become dirty or the paper may not feed properly. Use the paper after correcting paper curl as follows. (1)Face up the printing surface*1, and cover it with a non-printing regular paper to avoid damaging the surface. (2)Roll up the paper in a direction opposite to paper curl as the figure below.
Troubleshooting Printer Does Not Start or Printer Stops During Print Jobs Possible Cause Try This Print head has overheated due to long periods of continuous printing Stop printing and turn the printer off for at least 15 minutes to allow the print head to cool down. The print head tends to overheat when printing continuously for long periods of time. The print head is designed to automatically pause at line breaks before resuming printing in order to cool down.
Troubleshooting Cannot Print Properly from the Digital Camera The following are the possible errors that may occur when printing directly from a digital still camera or digital video camcorder*, and the countermeasures to eliminate them. * Hereafter, the digital still camera and digital video camcorder are collectively called a digital camera or camera. note • PictBridge or Canon Bubble Jet Direct compatible digital cameras can be connected to your printer for direct printing.
Troubleshooting Camera Error Message Try This Printer in use/Printer warming up • Photos are being printed from the computer. Wait until printing ends. The printer automatically starts printing the photos from the camera after completing the current printing. • Wait until warm-up ends. When it is ready, the printer starts printing automatically. No paper/Paper error Load the paper, and select Continue*1 in the display on your camera.
Troubleshooting Cannot Install the Printer Driver Possible Cause Unable to proceed beyond the Printer Port Screen Other applications running in the background Try This Reinstall the printer driver 1. Click Cancel. 2. Click Start Over on the Installation Failure screen. 3. Click Back on the Easy Install screen. 4. Click Exit on the Welcome screen, then remove the CD-ROM. 5. Turn the printer off. 6. Restart the computer. 7. Carefully follow the procedures described and reinstall the driver.
Appendix Appendix Specifications Printer Printing resolution: 4800×1200 dpi. max. (Ink droplets can be placed in a pitch of 1/4800 inch at minimum. Supported only when printing with a computer.) Print speed Approx. 85 seconds * Based on printing Canon standard pattern on 4"×6"/101.6×152.4mm Photo Paper Plus Glossy with borderless print. Print speed may vary according to conditions of use such as print mode and image. Print width: 94.8mm max. (3.732in) (for Borderless Printing: 101.6mm/ 4.
Appendix Camera Direct Print Canon Bubble Jet Direct Compatible Paper: Card #1 (Photo Paper Pro 4"×6" /101.6×152.4 mm), Card #2(Photo Paper Plus Glossy Photo Paper Plus Semi-gloss or Glossy Photo Paper 4"×6" /101.6×152.4 mm), Card #3(not applicable), LTR (not applicable), A4 (not applicable) Layout Print: Standard: Borderless / with border, Index Print: 15-80 images Print Quality: Standard Image Optimize: Exif Print Date Print: Supported DPOF Functions: Ver. 1.
Appendix Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use your printer safely. Do not attempt to use printer in any way not described in this manual. Warning You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions. Choosing a Location Do not place the printer close to flammable solvents such as alcohol or thinners.
Appendix About the Lithium Coin Cell Battery CR2025 Use a lithium coin cell battery CR2025. If you use an incorrect one, an explosion may occur. Discard used batteries according to the local laws and regulations. Do not heat or throw the battery into a fire or soak it into water. It may cause fire or personal injury due to a battery explosion or liquid leakage. Do not disassemble, modify, or heat a battery. It may cause personal injury due to liquid leakage.
Appendix Regulatory Information Color Printer Model: K10248 (DS700) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Appendix Remote Control: K30240 (RC-10) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Index Index Numerics D 101.6 × 152.4mm/ 4"×6" paper ................... 19 Date display format ................................. 12, 36 Date print ......................................................34 Date print (PictBridge) ...................................42 Deep Cleaning ......................................... 12, 58 Direct Print Port ...............................................7 Direct Printing from PictBridge-compatible Digital Cameras .........................................
Index Ink drying wait time .................................12, 71 Ink tank .....................................................6, 60 Ink Tank BCI-16 Color ................................3, 60 Inserting a Memory Card ............................... 16 Installing an Ink Tank ...................................... 6 Installing the Print Head ................................. 5 Installing the Printer Driver— Macintosh ....... 51 Installing the Printer Driver— Windows ......... 49 IrDA .......................
Index Printer Parts and Their Function ...................... 7 Printing a Photo by Displaying it on TV (Infrared print) .......................................... 47 Printing a Photo List ..................................... 31 Printing a Photo with a Mobile Phone and the Printer ................................................ 46 Printing According to the settings Made on the Camera .......................................... 32 Printing All Photos ........................................
T2202D_PPG_US_Cover.fm Page 1 Tuesday, July 20, 2004 4:19 PM Photo Printing Guide The following ink tank is compatible with DS700. For details on ink tank replacement, refer to “Replacing an Ink Tank” in this guide. QA7-3336-V01 XXXXXX ©CANON INC.