User Guide

SERVICE BULLETIN
FAX
Issued by Canon Europa N.V.
MODEL:
SmartBase PC1210D
No.: PC1200S-015
SmartBase PC1230D
(FF-T01-L6-000050-01)
Date: 25.10.02
LOCATION: INTERNAL COMPONENTS 3
SUBJECT: CHANGE OF A PART
Reason :
Measure to prevent the grounding plate 3 (reader unit) from coming into contact with
other parts.
As an adverse effect of the gasket, which has been implemented as a measure
for noise, the deflection of the grounding plate 3 becomes larger, and the arm of
the fixing drive release lever comes into contact with the tip of the grounding plate
3. Consequently, the drive release lever fails to return to the home position, and
the fixing drive fails to be conveyed, resulting in a jam.
Outline :
The tip of the member part FB6-0106 on the PLATE, GROUNDING FF6-1455 is
cut diagonally. In addition, the shape of the SHEET, MOTOR FB6-2908 is
changed to avoid the grounding plate's sliding.
Interchangeability of the PLATE, GROUNDING FF6-1455 in terms of servicing
In case the tip of the PLATE, GROUNDING FF6-1455 (FB6-0106) has already been
cut diagonally, replace only the PLATE, GROUNDING FF6-1455.
In case the tip of the PLATE, GROUNDING FF6-1455 (FB6-0106) is curved in
shape, change the PLATE, GROUNDING FF6-1455 and the SHEET, MOTOR
FB6-2908 (set up this time) at the same time.
Refer to Service Bulletin PC1200S-014.
Parts
Part Name Part No. UNIT No. Qty IC Location
Old PLATE,GROUNDING FB6-0101-000 1 NY
New PLATE,GROUNDING FF6-1455-000 1
Old
New SHEET,MOTOR FB6-2908-000 1