User Guide

SERVICE BULLETIN

FAX

Issued by Canon Europa N.V.

MODEL:

SmartBase PC1210D,

No.:

PC1200S-012

SmartBase PC1230D

(FF-T01-L6-000043-01)

Date: 27.09.02

LOCATION: READER DRIVE ASSEMBLY

SUBJECT: CHANGE OF SHAPES OF MEMBER PARTS

Reason :

Measure for noise

Outline :

The gear pulley overlapping the idler gear has a depression on the flange due to

molding. If the shaft leans, and consequently the idler gear is lifted, the idler gear

might come into contact with the depression on the flange, resulting in noise. As

a measure for it, round ribs are added to the top and under surfaces of the 45T

gear (FU3-0076) and to the under surface of the 37T pulley/16T gear

(FU3-0075).

Rib of FU3-0075-020 Ribs of FU3-0076-020

Be sure to replace the 45T gear (FU3-0076) and the 37T pulley/16T gear

(FU3-0075) at the same time. Upon replacement of these member parts, if you

find the countermeasure mylar, which was a temporary measure, be sure to

remove it.

PAGE 1
SERVICE BULLETIN FAX Issued by Canon Europa N.V. MODEL: SmartBase PC1210D, SmartBase PC1230D No.: PC1200S-012 (FF-T01-L6-000043-01) Date: 27.09.02 LOCATION: READER DRIVE ASSEMBLY SUBJECT: CHANGE OF SHAPES OF MEMBER PARTS Reason : Measure for noise Outline : The gear pulley overlapping the idler gear has a depression on the flange due to molding.
PAGE 2
FAX -2- PC1200S-012 Parts Part Name Part No. Old Qty IC FG6-7933-000 1 NY FG6-7933-020 1 PULLEY,37T/GEAR,16T FU3-0075-000 1 New PULLEY,37T/GEAR,16T FU3-0075-020 1 Old GEAR,45T FU3-0076-000 1 New GEAR,45T FU3-0076-020 1 READER DRIVE UNIT No. Location ASSEMBLY New READER DRIVE ASSEMBLY Old NN NN Serial No. Product Code Model Rev No. Starting Serial No. SmartBase PC1210D C.