Instruction manual

191
Post-Processing
Images
You can process RAW images with the camera or
resize (shrink) JPEG images.
A M icon at the upper right of a page title indicates that the
function can be used when the Mode Dial is set to <d/s/
f/a/F>.
* Function which cannot be used in the fully-automatic
modes (1/C).
You cannot process the RAW images or resize JPEG images
shot when the firmware version was 1.x.x with the camera
updated to version 2.x.x.
The camera may not be able to process images taken with
another camera.
Post-processing images as described in this chapter is not
possible while the camera is connected to a personal
computer via the <C> terminal.
COPY