Instruction manual

f: Selecting the AF ModeN

Suited for still subjects. When you

press the shutter button halfway, the

camera will focus only once.

When focus is achieved, the AF point

which achieved focus will be

displayed, and the focus confirmation

light <o> in the viewfinder will also

light.

With evaluative metering, the

exposure setting will be set at the

same time focus is achieved.

While you hold down the shutter button halfway, the focus will be

locked. You can then recompose the shot if desired.

In the d/s/f/a/F shooting modes, AF is also possible by

pressing the <p> button.

This AF mode is for moving subjects when the focusing distance

keeps changing. While you hold down the shutter button halfway,

the subject will be focused continuously.

The exposure is set at the moment the picture is taken.

In the d/s/f/a/F shooting modes, AF is also possible by

pressing the <p> button.

One-Shot AF for Still Subjects

Focus confirmation light

AF point

AI Servo AF for Moving Subjects

If focus cannot be achieved, the focus confirmation light <o> in the

viewfinder will blink. If this occurs, a picture cannot be taken even if the

shutter button is pressed completely. Recompose the picture and try to

focus again. Or see “When Autofocus Fails” (p.96).

If the [1 Beep] menu is set to [Off], the beeper will not sound when

focus is achieved.

With AI Servo AF, the beeper will not sound even when focus is achieved.

Also, the focus confirmation light <o> in the viewfinder will not light.

COPY