Instruction manual

*FE
Lock*
FE
(flash
exposure) lock locks
the correct flash exposure setting for any
part
of
the scene.
With the
flash mode set
toE-TTL
11/E-TTL
autoflash,
press the camera's
<
* > button to
enable
FE
lock. On
some cameras, press the
<
M-Fn
> or
<FE
l
> button.
D
D
1 Focus the subject.
l Press the
<
* > button. (
816)
• Aim the center of the viewfinder over
the subject and press the
<
*
> button .
._
The
Speedlite
fires a
preflash,
and
the required
flash
output is retained
in
memory.
,._
"FEL"
will
be
displayed
in
the
viewfinder for approx. 0.5 sec.
•
Each time you press
the<*>
button,
a preflash will
be fired and a new
flash
exposure reading will be
locked.
3
Take the picture.
• Compose the picture and press the
shutter button
completely.
,._
The flash
fires when the picture is
taken.
0 •
If
the subject is too far away and underexposure may
result,
the <
~
>
icon will blink
in the viewfinder. Move closer
to the subject and perform
FE
lock
again.
You
can
also
increase the ISO speed and perform FE
lock
again when using a digital camera.
18
•
If
the target subject
i.s too small
in the viewfinder, the FE
lock
might not
be very effective.