Instruction manual

Fully Automatic Flash Shooting
When you set the camera's shooting mode to <P> (Program AE) or
(Full Auto), E-TTL
IIIE-TTL fully automatic flash will make it as
easy as normal
AE shooting in the <P> and
modes.
1
4 Set the Speedlite to cETTL>.
tp=@ #I o Press the <MODE> button so that
<ETTL> is displayed.
--
When you press the shutter button
Maximum effective
raAge
halfway, the maximum effective range
(distance) of the flash will be
displayed.
focus.
a The shutter speed and aperture will
be set as displayed in the viewfinder.
F Check that the <f > icon is lit in the
viewfinder.
Take the picture.
' * When you press the shutter button
completely, the flash
w~ll fire and the
p~cture w~ll be taken
I
*
If a standard flash exposure was
- -
obta~ned the flash exposure
conf~rmat~on lamp (green) w~ll l~ght for
about
3 sec
0 If the lens focal length blinks on the LCD panel, the periphery of the flash
picture may turn out dark. Use the built-in wide panel
(p.18).
a
<ETTL> will be displayed on the LCD panel even if the camera is
compatible with
E-TTL II
0 If the flash exposure confirmation lamp does not light, move closer to the
subject and take the picture again. With a digital camera, you can also
increase the camera's
IS0 speed.
COPY