Instruction manual

Metered Manual Flash Exposures
When the Speedlite is attached to an EOS-1 D series camera, you can
also set the flash exposure level manually.
9 Set the camera and Speedlite.
o Setting the camera's shooting mode to <Av> or <M> is
recommended.
e Set the Speedlite's flash mode to <M> (Manual flash).
2 Focus the subject.
o Focus manually.
3 Set up an 18% gray card.
o Place the gray card at the subject's position.
r In the viewfinder, the entire spot metering circle at the center
should cover the gray card.
4 Press the <FE L> button. (616)
b The Speedlite will fire a preflash and the required flash output for
the subject is retained in memory.
b On the right side of the viewfinder, the exposure level indicator
will show the flash exposure level for the correct flash exposure.
5 Set the flash exposure level.
e Adjust the Speedlite's manual flash level and the
camera aperture so that the flash exposure level
aligns with the standard exposure index.
6 Take the picture.
e Remove the gray card and take the picture.
COPY