Instruction manual

Getting Started and
Basic Operation
Installing the Batteries ........................................ 8
Attaching and Detaching the Flash ......................... 9
Turning on the Power Switch ................................ 10
Fully Automatic Flash Shooting ........................... 11
Using E-TTL II and E-TTL Autoflash in the
........................
Shooting Modes ................. ..... 12
- () Cautions for firing continuous flashes -
a To avoid overheating and degrading the flash
head, do not fire more than
20 continuous
flashes. After
20 continuous flashes, allow a rest
time of at least
10 min.
a If you fire more than 20 continuous flashes and
then fire more flashes in short intervals, the
inner overheating prevention function may be
activated to make the recycling time about
8 to
20 sec. If this occurs, allow a rest time of about
15 min. and the flash will then return to normal.
COPY