Operation Manual

59
You can divide the slave units into two
firing groups, A and B, and adjust the
lighting balance (flash ratio) for shooting.
The exposure is controlled automatically
so that the total flash output of firing
groups A and B results in the standard
exposure.
1
Set the firing group of the slave
units.
Operate and set the slave units one by
one.
Press <8>.
Turn <9> to select the firing group
symbol, then press <8>.
Turn <9> to select <a> or <b>,
then press <8>.
Set one unit to
<a>, and the other
unit to <b>.
2
Set the master unit to <5>.
The procedures in steps 2 to 3 are to
be set on the master unit.
Press <8>.
Turn <9> to select the firing group
control symbol, then press <8>.
Turn <9> to select <U>, then
press <8>.
5 : Wireless Multiple Flash Shooting with Flash Ratio
Autoflash Shooting with Two Slave Groups
A
B
Firing groups
Firing group control