Operation Manual

: E-TTL Autoflash and Manual Exposure

When you want to set both the shutter speed and aperture, use manual

exposure. E-TTL autoflash controls the flash output according to the

aperture you set. The background exposure is determined by the shutter

speed and aperture combination.

Set the camera's Command Dial

to < >.

• Set the high-speed sync switch to

<>.

Set the desired aperture and

shutter speed.

• Turn the camera's electronic dial.

• Set shutter speed anywhere from 30

sec. to the camera's fastest sync

speed.

Take the picture.

• Focus the subject, check that the

< > icon is lit in the viewfinder, then

take the picture.

Flash in Other Picture-Taking Modes

K133 (E) 02.4.1 3:04 PM Page 24