Operation Manual

38
: TTL Autoflash and Manual Exposure
When you want to set both the shutter speed and aperture, use manual
exposure. TTL autoflash controls the flash output according to the aperture
you set. The background exposure is determined by the shutter speed and
aperture combination.
Flash in Other Picture-Taking Modes
M
1
Set the camera's Command Dial
to < >.
2
Set the desired aperture and
shutter speed.
• Turn the camera's electronic dial.
• Set shutter speed anywhere from 30
sec. to the camera's fastest sync
speed.
3
Take the picture.
• Focus the subject, check that the
< > icon is lit in the viewfinder, then
take the picture.
K133 (E) 02.4.1 3:04 PM Page 38