Operation Manual

44
Multi-Speedlite System
Sample Wireless Flash System
You can easily set up an E-TTL wireless autoflash system with the 550EX,
ST-E2, MR-14EX or MT-24EX as the master unit and the 420EX as the
slave unit.
Just set the 420EX's wireless selector to < > and position the slave
unit(s) as desired within the wireless transmission range.
ST-E2
(Master unit)
420EX (Slave unit)
420EX (Slave unit)
Approx. 80°
• The 420EX and 550EX can be set and used together as wireless slave units.
• If the 420EX slave unit is not used for about 10 minutes, the SE mode (→page
14) will take effect (indicated by a blinking channel No.) automatically to turn off
the power.
Pressing the master unit's test firing button within 30 minutes after the SE
mode starts will turn the slave unit back on.
K133 (E) 02.4.1 3:05 PM Page 44