Operation Manual
Table Of Contents
- Contents
- Chapter 1 Welcome !
- Chapter 2 Setting Up
- Chapter 3 Getting Started
- Chapter 4 Setting Up and Using Speed Dialing
- Chapter 5 Using the Fax as a Copier
- Chapter 6 Sending Documents
- Chapter 7 Receiving Documents
- Chapter 8 Using the Memory Features
- Chapter 9 Using a Relay Network
- Chapter 10 Using Confidential Mailboxes
- Chapter 11 Setting Up and Using Polling
- Chapter 12 Other Special Features
- Chapter 13 Restricting Use of the Fax
- Chapter 14 Printing Reports and Lists
- Chapter 15 Maintenance & Frequently Asked Questions
- Chapter 16 Summary of Important Settings
- Appendix A Specifications
- Appendix B Documents You Can Scan
- Glossary
- Index
3-24 Getting Started Chapter 3
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
The fax does not enter the energy saver mode in the following cases:
❏ When documents are stored in the memory.
❏ When a paper or document jam has occurred, when the paper
cassettes have run out of paper, or when the toner cartridge has run
out of toner.
❏ When a document has been fed into the automatic document feeder
(ADF).
❏ When you install either the optional Dual-line Upgrade Kit or PCL6
Printer Board.
You cannot press the Energy Saver button to put the fax in the energy
saver mode. The fax enters the energy saver mode only after the speci-
fied time has elapsed.