Operation Manual
Table Of Contents
- Contents
- Chapter 1 Welcome !
- Chapter 2 Setting Up
- Chapter 3 Getting Started
- Chapter 4 Setting Up and Using Speed Dialing
- Chapter 5 Using the Fax as a Copier
- Chapter 6 Sending Documents
- Chapter 7 Receiving Documents
- Chapter 8 Using the Memory Features
- Chapter 9 Using a Relay Network
- Chapter 10 Using Confidential Mailboxes
- Chapter 11 Setting Up and Using Polling
- Chapter 12 Other Special Features
- Chapter 13 Restricting Use of the Fax
- Chapter 14 Printing Reports and Lists
- Chapter 15 Maintenance & Frequently Asked Questions
- Chapter 16 Summary of Important Settings
- Appendix A Specifications
- Appendix B Documents You Can Scan
- Glossary
- Index
Chapter 4 Setting Up and Using Speed Dialing 4-3
Setting Up and
Using Speed
Dialing
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Keep in mind these important points about pauses:
❏ A pause entered within a number (p) is 2 seconds long.
❏ You can add consecutive pauses (pp) with the Pause button.
Each additional pause adds 2 seconds to the pause time.
❏ You can change the length of a pause entered within a
number.(➞ below)
❏ A pause at the end of a number (P) is 10 seconds long.
❏ You may have to insert one or more pauses at the end of a
number to dial an overseas number.
❏ You cannot insert a pause when you dial using the numeric
keypad after pressing Hook or after picking up the handset.
Adjusting the Length of a Pause
Follow this procedure to adjust the length of a pause entered within a
number.
This procedure is effective only for adjusting the length pauses entered
within telephone numbers. The 10-second pause entered at the end of a
number cannot be adjusted.
1.
Open the TX SETTINGS menu.
Open all three of the One-touch Speed Dialing panels. Then press
Data Registration.
Data
Registration
REGISTRATION
1.DATA REGISTRATION
Set
2.
Press Set.
DATA REGISTRATION
1.USER SETTINGS