Operation Manual
Table Of Contents
- Contents
- Chapter 1 Welcome !
- Chapter 2 Setting Up
- Chapter 3 Getting Started
- Chapter 4 Setting Up and Using Speed Dialing
- Chapter 5 Using the Fax as a Copier
- Chapter 6 Sending Documents
- Chapter 7 Receiving Documents
- Chapter 8 Using the Memory Features
- Chapter 9 Using a Relay Network
- Chapter 10 Using Confidential Mailboxes
- Chapter 11 Setting Up and Using Polling
- Chapter 12 Other Special Features
- Chapter 13 Restricting Use of the Fax
- Chapter 14 Printing Reports and Lists
- Chapter 15 Maintenance & Frequently Asked Questions
- Chapter 16 Summary of Important Settings
- Appendix A Specifications
- Appendix B Documents You Can Scan
- Glossary
- Index
4-18 Setting Up and Using Speed Dialing Chapter 4
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Set
Press Set.
NAME :A
DATA ENTRY OK
CODED SPD DIAL
3.OPTIONAL SETTING
This completes the minimum settings for registering a three-digit
Coded Speed Dialing code.
To stop here and register another code
Data
Registration
Press Data Registration.
Repeat the procedure from step 2.
To end the procedure and return to standby
Stop
Press Stop.
To perform the optional setting
5.
Set
Press Set to continue.
OPTIONAL SETTING
OFF
Press the search buttons until you see the display below.
OPTIONAL SETTING
ON
Set
Press Set.
OPTIONAL SETTING
1.SET TIME
6.
Set the time for the transmission.
❏ If you set the timer for the Coded Speed Dialing code, every
document you send with this code will be sent at the same
time every day.
❏ You can set up to 5 different times in a 24-hour period for
sending.
❏ You can use this feature together with BATCH TX. If BATCH
TX is ON, the documents will be grouped and sent together at
the preset time. The fax unit will make only one phone call,
saving you time and money.(➞16-34)