Operation Manual
Table Of Contents
- Contents
- Chapter 1 Welcome !
- Chapter 2 Setting Up
- Chapter 3 Getting Started
- Chapter 4 Setting Up and Using Speed Dialing
- Chapter 5 Using the Fax as a Copier
- Chapter 6 Sending Documents
- Chapter 7 Receiving Documents
- Chapter 8 Using the Memory Features
- Chapter 9 Using a Relay Network
- Chapter 10 Using Confidential Mailboxes
- Chapter 11 Setting Up and Using Polling
- Chapter 12 Other Special Features
- Chapter 13 Restricting Use of the Fax
- Chapter 14 Printing Reports and Lists
- Chapter 15 Maintenance & Frequently Asked Questions
- Chapter 16 Summary of Important Settings
- Appendix A Specifications
- Appendix B Documents You Can Scan
- Glossary
- Index
![](/manual/canon/super-g3-laser-class-3170-series/operation-manual-english/images/img-174.png)
Chapter 6 Sending Documents 6-17
Sending
Documents
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Manual Sending
Manual sending allows you to talk to the other party before you send the
document. This method is useful if the operator of the other fax must
manually set the other fax to receive before it can receive a document.
❏ The sending speed is 14400 bps or less when sending manually.
❏ The handset is available as an option. (➞2-16)
1.
Set the document on the fax. (➞6-3)
Set the document resolution, contrast, and document type. (➞6-4)
You cannot set sender's name when sending manually.
2.
Hook
Press Hook.
After you press Hook the In Use lamp blinks green and you will be
able to hear the dial tone.
-if not-
Without pressing Hook, just pick up the handset if you have
installed the optional handset.