Operation Manual
Table Of Contents
- Contents
- Chapter 1 Welcome !
- Chapter 2 Setting Up
- Chapter 3 Getting Started
- Chapter 4 Setting Up and Using Speed Dialing
- Chapter 5 Using the Fax as a Copier
- Chapter 6 Sending Documents
- Chapter 7 Receiving Documents
- Chapter 8 Using the Memory Features
- Chapter 9 Using a Relay Network
- Chapter 10 Using Confidential Mailboxes
- Chapter 11 Setting Up and Using Polling
- Chapter 12 Other Special Features
- Chapter 13 Restricting Use of the Fax
- Chapter 14 Printing Reports and Lists
- Chapter 15 Maintenance & Frequently Asked Questions
- Chapter 16 Summary of Important Settings
- Appendix A Specifications
- Appendix B Documents You Can Scan
- Glossary
- Index
Chapter 7 Receiving Documents 7-5
Receiving
Documents
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Turning on and Adjusting the Auto Switch Time
If you have installed the optional handset or connected an extension
telephone to the fax machine, follow this procedure to set the ring time
before the fax switches automatically to the document receive mode
while in the manual receive mode. This allows more time for you to pick
up the handset and answer the telephone for voice communication
before the fax switches to the receive mode.
1.
Open the RX SETTINGS menu.
Open all three of the One-touch Speed Dialing panels. Then press
Data Registration.
Data
Registration
REGISTRATION
1.DATA REGISTRATION
Set
Press Set.
DATA REGISTRATION
1.USER SETTINGS
Press the search buttons until you see the display below.
DATA REGISTRATION
4.RX SETTINGS
Set
Press Set.
RX SETTINGS
1.ECM RX
2.
Open the MAN/AUTO SWITCH menu.
Press the search button until you see the display below.
RX SETTINGS
2.MAN/AUTO SWITCH