Operation Manual
Table Of Contents
- Contents
- Chapter 1 Welcome !
- Chapter 2 Setting Up
- Chapter 3 Getting Started
- Chapter 4 Setting Up and Using Speed Dialing
- Chapter 5 Using the Fax as a Copier
- Chapter 6 Sending Documents
- Chapter 7 Receiving Documents
- Chapter 8 Using the Memory Features
- Chapter 9 Using a Relay Network
- Chapter 10 Using Confidential Mailboxes
- Chapter 11 Setting Up and Using Polling
- Chapter 12 Other Special Features
- Chapter 13 Restricting Use of the Fax
- Chapter 14 Printing Reports and Lists
- Chapter 15 Maintenance & Frequently Asked Questions
- Chapter 16 Summary of Important Settings
- Appendix A Specifications
- Appendix B Documents You Can Scan
- Glossary
- Index
8-2 Using the Memory Features Chapter 8
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
When the Fax Displays RECEIVED IN MEMORY
If paper or toner runs out while you are receiving a document or the fax
detects that the output tray is full, the fax will automatically store the
unprinted pages of the document in the memory and display these
messages:
RECEIVED IN MEMORY
RECEPTION OK
12/31/1999 FRI 12:30
TX/RX NO. 5033
1.
Check the LCD display and the indicators on the left of the
display.
Rec. Paper
Add paper to the paper cassettes, if the Rec. Paper indicator is on
and if you see this message: (➞2-31)
SUPPLY REC. PAPER
Change
Cartridge
Replace the toner cartridge if the Change Cartridge indicator is on
and if you see this message: (➞15-17)
REPLACE CARTRIDGE
Pick up the printed paper on the output trays if you see this
message:
OUTPUT TRAY FULL
2.
As soon as you close the re-filled paper cassette, close the printer
cover over the newly installed toner cartridge, or pick up the
printed pages on the tray, the pages stored in the memory are
printed.