Operation Manual
Table Of Contents
- Contents
- Chapter 1 Welcome !
- Chapter 2 Setting Up
- Chapter 3 Getting Started
- Chapter 4 Setting Up and Using Speed Dialing
- Chapter 5 Using the Fax as a Copier
- Chapter 6 Sending Documents
- Chapter 7 Receiving Documents
- Chapter 8 Using the Memory Features
- Chapter 9 Using a Relay Network
- Chapter 10 Using Confidential Mailboxes
- Chapter 11 Setting Up and Using Polling
- Chapter 12 Other Special Features
- Chapter 13 Restricting Use of the Fax
- Chapter 14 Printing Reports and Lists
- Chapter 15 Maintenance & Frequently Asked Questions
- Chapter 16 Summary of Important Settings
- Appendix A Specifications
- Appendix B Documents You Can Scan
- Glossary
- Index
15-12 Maintenance & Frequently Asked Questions Chapter 15
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
5. Paper Cassette 1 area
1.
Remove Paper Cassette 1. If Paper Cassette 2 is installed, be sure
to remove it first.
If you can see the edge of the paper
Locate the jammed paper inside the fax unit and gently pull it out.
If the paper does not come out easily or you cannot grasp the edge of the
paper easily, do not force it. Go to step 2. Always release the transfer guide
inside the fax unit before removing the paper. (➞15-9) After removing the
paper, gently guide the transfer guide back to its original position.
If you cannot see the edge of the paper
2.
Open the printer cover and remove the toner cartridge. (➞15-9)
Store the cartridge in its original protective bag to avoid exposure
to light.