Operation Manual
Table Of Contents
- Contents
- Chapter 1 Welcome !
- Chapter 2 Setting Up
- Chapter 3 Getting Started
- Chapter 4 Setting Up and Using Speed Dialing
- Chapter 5 Using the Fax as a Copier
- Chapter 6 Sending Documents
- Chapter 7 Receiving Documents
- Chapter 8 Using the Memory Features
- Chapter 9 Using a Relay Network
- Chapter 10 Using Confidential Mailboxes
- Chapter 11 Setting Up and Using Polling
- Chapter 12 Other Special Features
- Chapter 13 Restricting Use of the Fax
- Chapter 14 Printing Reports and Lists
- Chapter 15 Maintenance & Frequently Asked Questions
- Chapter 16 Summary of Important Settings
- Appendix A Specifications
- Appendix B Documents You Can Scan
- Glossary
- Index
2-26 Setting Up Chapter 2
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Attaching the Document Output Tray and the Upper Out-
put Tray
1.
Attach the upper output tray to the front of the fax unit.
Slide the end of the upper output tray down into the fax unit at an
incline, lifting the end nearest you.
• Do not use the fax without first attaching the upper output tray
correctly. A paper jam may occur.
• When removing the upper output tray, lift the end nearest you slightly
and pull the tray forward.
2.
Attach the document output tray to the front of the fax unit, just
above the upper output tray.
UPPER
OUTPUT TRAY
DOCUMENT
OUTPUT TRAY
EXTENDED LIP