Operation Manual
Table Of Contents
- Contents
- Chapter 1 Welcome !
- Chapter 2 Setting Up
- Chapter 3 Getting Started
- Chapter 4 Setting Up and Using Speed Dialing
- Chapter 5 Using the Fax as a Copier
- Chapter 6 Sending Documents
- Chapter 7 Receiving Documents
- Chapter 8 Using the Memory Features
- Chapter 9 Using a Relay Network
- Chapter 10 Using Confidential Mailboxes
- Chapter 11 Setting Up and Using Polling
- Chapter 12 Other Special Features
- Chapter 13 Restricting Use of the Fax
- Chapter 14 Printing Reports and Lists
- Chapter 15 Maintenance & Frequently Asked Questions
- Chapter 16 Summary of Important Settings
- Appendix A Specifications
- Appendix B Documents You Can Scan
- Glossary
- Index
![](/manual/canon/super-g3-laser-class-3170-series/operation-manual-english/images/img-84.png)
Setting Up
Chapter 2 Setting Up 2-53
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Set
Press Set.
5.
Stop
Press Stop to return to standby.
•If the full paper sensor detects that the tray is full when the output tray
settings are input, the fax stops printing. If the fax is receiving
documents, they are stored in memory and the messages RECEIVED IN
MEMORY and OUTPUT TRAY FULL appear alternately on the display.
•Once you have picked up the printed paper from the output trays, do
not replace them onto the trays. It may cause paper jam.
Using the Face-up Tray
To select face-up delivery, pull down the face-up tray. The fax machine
will automatically switch to face-up delivery. The face-up tray is
particularly useful for heavier paper.
To open the face-up tray, take hold of its tab and pull down the tray.
Then grasp the end of the face-up tray and push it with your thumb to
unlock the extension tray and pull it out until it is fully extended.
1
2
TAB
EXTENSION TRAY