MULTIMEDIA PROJECTOR User’s Manual U ’ M l
USES OF THIS PROJECTOR Features of MULTIMEDIA PROJECTOR SX50 Thank you for purchasing a Canon projector. The MULTIMEDIA PROJECTOR SX50 is a high-performance, compact, lightweight (3.9 kg/8.6 lbs) projector which supports of SXGA+ resolution (1400 by 1050 dots). This projector incorporates AISYS, a unique optical engine developed by Canon, allowing the data from the computer and the moving picture from the DVD player to be projected with a high degree of resolution.
LOOKING IN THE INDEX Be Sure to Read before Use. This section describes important safety and operating instructions. Learning the Names of Parts This section describes names of parts. Be sure to read this section. Setting up the Projector This section describes preparations for installing the projector. Be sure to read this section. Projecting an Image from the Computer This section describes the procedure for projecting an image from the computer connected to the projector.
SUPPLIED MANUALS AND SYMBOLS USED IN THIS MANUAL Supplied Manuals User’s Manual Quick Start Guide This manual provides detailed information about how to use this projector. Read this manual thoroughly to make the most of this projector and ensure safety. This guide shows an outline flowchart of the work necessary to make a presentation using this projector. Symbols of Buttons This projector can be operated using buttons on the remote control or main unit.
TABLE OF CONTENTS PROJECTING AN IMAGE FROM AV EQUIPMENT ...................................42 LOOKING IN THE INDEX ...................... 3 Connecting the Projector to AV Equipment................................................42 Starting Projection.......................................44 Adjusting the Image ....................................48 SUPPLIED MANUALS AND SYMBOLS IN THIS MANUAL................................... 4 TABLE OF CONTENTS ......................... 5 SAFETY INSTRUCTIONS............
SAFETY INSTRUCTIONS Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. SAFETY INSTRUCTIONS Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.
CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75. SAFETY INSTRUCTIONS Safety Precaution WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - This projector produces intense light from the projection lens. Do not stare directly into the lens as possible. Eye damage could result. Be especially careful that children do not stare directly into the beam.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions shoud be read before the product is operated. SAFETY INSTRUCTIONS Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector.
Slots and openings in the back and bottom of the cabinet are provided for ventilation, to insure reliable operation of the equipment and to protect it from overheating. SAFETY INSTRUCTIONS The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. SAFETY INSTRUCTIONS Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.
Federal Communication Commission Notice Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
LAMP HANDLING PRECAUTIONS SAFETY INSTRUCTIONS This projector uses a high-pressure mercury lamp which must be handled carefully and properly as mentioned below. • A lamp may explode with a loud sound or burn out due to a shock, scratch, or expiration of lifetime. • The lamp life may differ from lamp to lamp and according to the environment of use. There is not guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps.
INSTALLATION PRECAUTIONS Ensure that the projector is installed with a minimum distance of 1 m (3.3') from its left, right, rear, and top panels to the neighboring object such as a wall. Pay Attention to Hot Air from Exhaust Vent • Do not put any spray can near the vent. • • • • The internal pressure increases due to heat, resulting in explosion. Do not put any metallic object. It may become hot, resulting in an accident or injury. Do not put anything such as a plant pot.
BEFORE USE Supplied Accessories Check whether the following accessories are supplied with the projector. Remote control Batteries (type AAA, two) for remote control BEFORE USE Power cord (2m/6.6') Lens cap Computer connection cable (DVI/Mini D-sub, 15-pin) (1.8m/5.9') USB cable (1.8m/5.9') Component cable (RCA/Mini D-sub, 15-pin) (0.4m/1.3') User’s Manual Quick Start Guide Warranty card Carrying bag (P12) Lens cap strap Tie the lens cap to the projector with the supplied strap.
Part Names Main Unit of Projector Front 2 1 2 3 4 5 1 7 Focus Ring (P30) Infrared Remote Receiver (P16) Zoom Lever (P30) Lens Lens Cap 4 9 8 6 5 3 Back 6 7 8 9 Speaker Terminals and Connectors (P19) Power Cord Connector (P19) Anti-theft lock hole BEFORE USE Be sure to remove the lens cap during projection. The cap can deform or fire can occur. 1 Exhaust Vent Do not block this vent. Troubles or fire can result.
Remote Control 1 Infrared Remote Emitter Sends a signal to the infrared remote receiver on the main unit. 1 BEFORE USE 5 2 POWER button (P27, 45) Turns the projector on or off. 2 3 3 MENU button (P50) Displays a menu. 4 6 7 8 4 COMPUTER-1 button (P28, 46) Selects the image input from the DVI-I/RGB IN-1 terminal. Pressing this button continuously allows you to select an input signal (DIGITAL RGB or ANALOG RGB-1).
7 KEYSTONE button (P31) Corrects keystone distortion. 8 AUTO PC button (P29) When ANALOG RGB-1 or ANALOG RGB-2 is selected, performs the auto PC adjustment to adjust the tracking, total number of dots, and image position automatically. 10 POINTER button (P50) Selects the upper, lower, left, or right item in the menu. Also moves the mouse cursor (USB connection). 15 D.ZOOM button (P38) Zooms the image in or out. Pressing [+] enlarges the image and pressing [-] reduces the image.
Top Control BEFORE USE 1 10 11 1 POWER button (P27, 45) Turns the projector on or off. 4 5 6 7 2 9 3 8 2 KEYSTONE button (P31) Corrects keystone distortion. 7 AUTO PC button (P29) When ANALOG RGB-1 or ANALOG RGB-2 is selected, performs the auto PC adjustment to adjust the tracking, total number of dots, and image position automatically. 3 MENU button (P50) Displays a menu. 8 OK button (P51) Determines the item selected from the menu.
Input Terminals on Main Unit 1 2 3 4 5 6 7 BEFORE USE 9 8 1 S-VIDEO IN terminal (P42) 5 SERVICE PORT jack Receives an S-VIDEO signal from AV Exclusively used by the service personnel (it equipment. is not used normally). 2 VIDEO IN terminal (P42) 6 USB terminal (P41) Receives a composite video signal from AV Connected to the computer with a USB cable equipment. when the remote control is used as the mouse of the computer.
INSTALLING THE PROJECTOR Determining the Distance to the Screen The projected image size is determined by the distance between the projector lens and the screen. Select the place where the desired image size is obtained according to the figure shown below. The image size can be adjusted using the Zoom lever by the lens. 9.1 m (29.9c) 6.0 m (19.7c) 4.5 m (14.8c) Zoom (max.) INSTALLING THE PROJECTOR 2.4 m (7.9c) Zoom (min.) 1.2 m (3.9c) Optical axis when image is projected at right angle to the screen.
Determining the Installation Place Placing in Front of the Screen Place the projector in front of the screen in such a manner that it is as perpendicular to the screen as possible. Screen Optical axis Placing on a Level Place Place the projector on a level place. INSTALLING THE PROJECTOR A slight error in the projection angle can be corrected using the KEYSTONE button.
Adjusting the Projection Angle The projection angle can be adjusted with the adjustable foot. Before making this adjustment, connect the computer and AV equipment and project an image on the screen. 1 2 Lift the front of the projector and push the adjusting foot lock. The adjustable foot extends with the spring force. INSTALLING THE PROJECTOR Adjust the projection angle while pushing the adjustable foot lock, and then release the lock.
PROJECTING AN IMAGE FROM THE COMPUTER Connecting the Projector to the Computer Connect the projector to the computer. Connecting to Video Terminals • Before connecting cables, turn off both the projector and computer. • Images may be improperly projected with digital RGB signals in 1280 x 1024 or 1400 x 1050 depending on the type of computer or DVI cable. • The USB terminal is used to use the remote control just like the computer mouse. Images cannot be projected simply by connecting the USB cable.
Connecting to Audio Terminals Before connecting cables, turn off both the projector and computer. Connect audio cables as required. Computer To AUDIO OUT Connect with an audio cable (with stereo mini jacks). PROJECTING AN IMAGE FROM THE COMPUTER • Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. • The built-in speaker is monaural. • The speaker plays the sound from the equipment which the audio cable is connected to.
Determining the Output Resolution of the Computer To make the most of the display performance of this projector, set output signal resolution of the computer to an optimum value. If the resolution set on the computer is low, the quality of the projected image is poor. The procedure for adjusting the resolution is as follows: Windows XP 1. Open the [Start] menu and select Control Panel. 2. In the Control Panel window, double-click the [Display] icon to display the Display Properties window. 3.
Starting Projection Connecting the Power Cord Before connecting the power cord, connect the projector to the computer. Buttons Used Here Remote control PROJECTING AN IMAGE FROM THE COMPUTER 26 Top control Connect the power cord and turn on the projector. 1 2 Insert the power cord plug in the power cord connection socket. Be sure to insert the power cord plug as far as it will go. Insert the power plug. The [POWER] indicator flashes red. It stays lit when the projector is ready for power-on operation.
Caution Connect the ground terminal of the power plug to the ground level in order to use the projector safely. Otherwise, the operating computer may cause electromagnetic radiation problems and poor reception by TV and radio. Unplug the Power Cord When the Projector is Not in Use The projector constantly consumes about 6W power even when the Power button is turned off. To ensure safety and power saving, remove the power plug from the AC outlet when the projector is not used for an extended period of time.
3 Select a video terminal of the computer. To input images from the DVI-I/RGB IN-1 terminal, select the [COMPUTER-1] button. To input images from the RGB IN2/COMPONENT/RGB OUT terminal, select the [COMPUTER-2] button. Remote control 4 PROJECTING AN IMAGE FROM THE COMPUTER 28 Topcontrol control Top Select a signal type. If images are not displayed correctly, press the button mentioned in step 3 repeatedly to select a desired input type.
Using the Auto PC Adjustment Function This projector automatically selects a signal type (VGA, SVGA, XGA, SXGA, SXGA+, etc.) and makes optimum settings for the total number of dots and tracking depending on the connected computer (auto PC adjustment). (This function cannot be used when digital RGB is selected.) When you switched to the computer mode using the [COMPUTER-1] or [COMPUTER-2] button, press the [AUTO PC] button. The auto PC adjustment becomes active to display images correctly.
Adjusting the Image Buttons Used Here Remote control PROJECTING AN IMAGE FROM THE COMPUTER 30 Top control Adjusting the Image Size Move the Zoom lever to adjust the image size. • If your desired image size is too large or small to adjust with the Zoom lever, change the projector installation position. Adjusting the Focus Turn the Focus ring to the position where the projected image looks sharpest. • If the projection distance is outside the range from about 1.2 m (3.9') to 9.1 m (29.
Adjusting Keystone Distortion If a projected picture has keystone distortion, correct it by using the keystone adjustment feature. 1 Select Keystone Adjustment. “Keystone adjustment” appears on the screen. Remote control 2 Top control To reduce the length To reduce the length of the left edge, press of the right edge, [<]. press [>]. 3 Press the [OK] button. PROJECTING AN IMAGE FROM THE COMPUTER Correct keystone distortion.
• The result of keystone adjustment is memorized. If the projector installation position is the same as before, keystone adjustment is not required. • When Keystone Adjustment is selected, signals are processed digitally. The image may look different from the original one. • The aspect ratio of the image may change when keystone is adjusted. • Keystone can be adjusted vertically and horizontally within the range of +/-20 degrees.
Selecting a Screen Mode You can select one of four screen modes depending on the display resolution of your computer. • A screen mode can be selected by selecting “Screen settings” from the menu. (P57) Full screen Select this to project an image displayed on the computer screen at a 4:3 aspect ratio (W:H) (SXGA+ [1400 by 1050 dots] or XGA [1024 by 768 dots]). The image displayed on the computer screen at a 5:4 (W:H) aspect ratio is projected with it compressed vertically or horizontally.
Selecting an Image Mode (Quality) You can select one of four image modes. You can adjust the image quality (brightness, contrast, sharpness, gamma, color) as you like. 1 Press the [IMAGE] button. Remote control “IMAGE” appears on the screen, allowing you to select a desired image mode by pressing the [IMAGE] button repeatedly. PROJECTING AN IMAGE FROM THE COMPUTER 34 [Standard] Select this to project an image with a similar quality to that of the original image.
Turning Off the Projector • Turning off the projector again with the lamp in an unstable state shortly after turning on the projector may shorten the lamp life. Wait at least 5 minutes before turning off the projector again. • Remove the AC power cord after the [POWER] indicator lights red after poweroff. Removing the AC power cord immediately can damage the lamp and circuits. • Using the projector for more than 24 hours continuously may shorten the life of the lamp and internal optical components.
Setting up the Power Management Function If the projector receives no signal input within 30 seconds, a countdown timer appears. The lamp will turn off five minutes later and the projector will enter the power management mode selected in advance. You can select one of the following power management modes from the menu. (P70) Ready mode Select this mode to start projection immediately. When the projector enters this mode, the lamp is turned off and its cooling starts.
USEFUL FUNCTIONS AVAILABLE DURING PROJECTION Let’s take a look at the useful functions available when you make a presentation with a computer connected to the projector. Blacking Out an Image Temporarily [NO SHOW] ...................................... P37 Blacking Out an Image Temporarily [NO SHOW] Useful when: • You finished the presentation. • You want to divert attendees’ attention from the screen. Making an Image Larger/Smaller [D.ZOOM] ..........................................
Making an Image Larger/ Smaller [D.ZOOM] Useful when: • Making a small graph larger during presentation. • Moving unnecessary information off the screen to focus on the current subject. Moving the Image to the Desired Position If the enlarged image is larger than the screen, you can move it so that the desired portion of the image is displayed inside the screen. Remote control Top control Make the projected image larger/smaller.
Showing the Elapsed Time Indicating a Position with a Spotlight [P-TIMER] Useful when: • You want to manage the proceedings of the presentation. [SPOT] Useful when: • You point to a portion of an image that should draw attendees’ attention. The timer indicating the elapsed time (00:00 to 59:59) is shown in the lower right corner just like the stopwatch. Point to a desired portion of the projected image with a pointer.
Freezing the Picture Muting the Sound/ Adjusting the Volume [FREEZE] Useful when: • You want to perform a computer operation which is irrelevant to the proceedings of the presentation. • You want to stop a moving image. [MUTE] Useful when: • You want to mute the sound from the projector immediately. • You want to adjust the volume level of the projector speaker. Freeze the moving image. Freezing an Image Remote control Mute the sound temporarily or adjust the volume level.
Operating the Mouse Using the Remote Control Moving the Cursor Remote control Useful when: • You want to use the supplied remote control as the wireless mouse of the personal computer. Connecting the USB Cable Make sure that both the computer and projector are turned off. Connect the supplied USB cable between the USB terminal on the computer and the USB terminal on the projector. You can move the mouse cursor vertically and horizontally.
PROJECTING AN IMAGE FROM AV EQUIPMENT Connecting the Projector to AV Equipment Connect the projector and AV equipment. Connecting to Video Terminals • Before connecting cables, turn off both the projector and computer. • SCART terminal is not supported.
Connecting to Audio Terminals Connect audio cables as required. Before connecting cables, turn off both the projector and computer. To AUDIO OUT Connect with an audio cable (with stereo mini jacks). PROJECTING AN IMAGE FROM AV EQUIPMENT • Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. • The built-in speaker is monaural. • The speaker issues the sound from the equipment to which an audio cable is connected.
Starting Projection Connect the power cord and turn on the projector. • Before connecting the power cord, connect the projector to the AV equipment. • Once the projector is turned off, it cannot be turned on for about 90 seconds. Wait until the lamp cooling period ends and the [POWER] indicator lights red. The projection method is basically the same as that used when the projector is connected to a computer. (P23) Lets take a look at only the topics specific to AV equipment.
1 Connect the power cord. 2 Make sure that indicator lights red. 3 the [POWER] Press the [POWER] button. The [POWER] indicator first blinks green and then turns lit green. Remote control Top control The Opening window is displayed for about 20 seconds along with the countdown timer. PROJECTING AN IMAGE FROM AV EQUIPMENT • Canceling the Countdown Function Performed at the Start (61) • Displaying a Unique Logo on the Opening Screen (59, 60) • If a password entry screen appears, enter the password.
4 Select an AV terminal. To input images from the DVI-I/RGB IN1 terminal, select the [COMPUTER-1] button. To input images from the RGB IN-2/ COMPONENT/RGB OUT terminal, select the [COMPUTER-2] button. To input image from the S-VIDEO IN terminal or VIDEO IN terminal, press the [VIDEO/S] button.
a signal type. 5 Select If images are not displayed correctly, press the button mentioned in step 4 repeatedly to select a desired input type. Pressing the [COMPUTER-1] button repeatedly allows you to select DIGITAL RGB and ANALOG RGB-1 alternately. Pressing the [COMPUTER-2] button repeatedly allows you to toggle between ANALOG RGB-2 and COMPONENT. Pressing the [VIDEO/S] button repeatedly allows you to toggle between VIDEO and S-VIDEO. Remote control Top control 6 Play the AV equipment.
Adjusting the Image The image adjustment method is the same as that used when the projector is connected to a computer. Lets take a look at only the topics specific to AV equipment. For other image adjustment methods, see P30. Selecting a Screen Mode You can select one of three screen modes depending on your AV equipment, specifications of playback software, etc. • A screen mode can be selected by selecting “Screen settings” from the menu.
SETTING UP FUNCTIONS USING MENUS Using Menus Windows shown on the projector screen to allow you to set up the projector are called menus. This projector supports the following three menus: Display Setting Menu This menu is used to set input signals of the computer and AV equipment and make various settings related to display. Image Adjustment Menu This menu is used to make various adjustments to the projected image. System Setting Menu This menu is used to set various functions of the projector.
Buttons Used Here Remote control 1 Press the [MENU] button. A menu window appears. • To close the menu window, press the [MENU] button again. Remote control SETTING UP FUNCTIONS USING MENUS 50 Top control Top control the tab containing the item 2 Select you want to set. Select the [Display settings], [Image Adj.], or [System settings] tab. • The selected tab contains the items handled previously. To select another tab, press the [^] button repeatedly. Selected item is highlighted in orange.
3 4 5 Select the item you want to set. Make a setting. Make an adjustment or choice. Select an item from the menu, make an adjustment using the slide bar, or make a setting in a different window according to the purpose of setting. Press the [OK] button. The setting takes effect.
Display Settings Menu Make various settings related to input signals of the computer and AV equipment as well as the settings related to display. SETTING UP FUNCTIONS USING MENUS 52 Performing the auto pc adjustment [Auto pc adj.] ............... P52 Adjusting the total number of dots [Total dots]................... P53 Adjusting the tracking [Tracking] .................... P53 Adjusting the horizontal position [Horizontal position] .......
Adjusting the Total Number of Dots Adjust the total number of horizontal dots. Adjusting the Tracking Adjust the tracking when the projected image flickers due to a tracking error. Display settings Display settings Input signal settings Input signal settings Total dots Tracking > Increase the total number of dots. > Increases the set value. < Reduce the total number of dots. < Decreases the set value. • This adjustment is required when the auto PC adjustment cannot project images correctly.
Adjusting the Horizontal Position Adjust the horizontal position of the screen when the projected image is shifted horizontally. Adjust the vertical position of the screen when the projected image is shifted vertically. Display settings Display settings Input signal settings Input signal settings Horizontal position SETTING UP FUNCTIONS USING MENUS 54 Adjusting the Vertical Position Vertical position > Moves the screen to the right. > Moves the screen up. < Moves the screen to the left.
Adjusting the Number of Horizontal Pixels When the horizontal size of the screen is too large or small, adjust it to the screen size. Adjusting the Number of Vertical Pixels When the vertical size of the screen is too large or small, adjust it to the screen size. Display settings Display settings Input signal settings Input signal settings Horizontal pixels > < Increase the number of horizontal pixels. Decrease the number of horizontal pixels. > < Increase the number of horizontal pixels.
Selecting an Input Signal Type (1) When two or more types of input signals are found during execution of the auto PC adjustment function, select a correct input signal type. Display settings Input signal select [1280 x 1024] [1400 x 1050] •• • Select an input signal type suitable for the computer from the displayed signal types.
Selecting an Input Signal Type (3) When images from AV equipment is not projected correctly, you can select an input signal type manually. Display settings Input signal select Auto 1080i 1035i 720p 480p 575i 480i Confirm the input signal type according to the User's Manual that came with the AV equipment connected. When the projected image size is larger/ smaller than the screen size. Display settings Screen settings An image from the computer is projected fully on the screen.
Selecting a Screen Mode (2) Select a screen mode according to the size of the image to be projected. SETTING UP FUNCTIONS USING MENUS 58 Selecting a Menu Position You can select the position of the menu displayed on the screen. Display settings Display settings Screen settings Menu position The screen mode is automatically switched between [Normal] and [Wide Screen] depending on the image from the AV equipment. This item is displayed when Component Input is selected to allow you to select it.
Capturing a Logo to Be Displayed A user’s unique image (logo) can be displayed when the power is turned on, there is no input signal, or the image is blacked out temporarily. Selecting a Logo Display Position Select a logo display position. A logo can be displayed at the center or in a corner of a desired screen. Display settings User screen settings Logo capture OK • The image on only one screen can be captured.
Displaying a Logo (No signal screen) A logo can be displayed on the screen when there is no input signal. A logo can be displayed on the screen when the image is blacked out temporarily by pressing the [NO SHOW] button. Display settings Display settings User screen settings User screen settings No signal screen Black SETTING UP FUNCTIONS USING MENUS 60 Displaying a Logo (NO SHOW) Blue User logo No logo is displayed (black screen). No logo is displayed (blueback).
Displaying a Logo (Projector on) A logo can be displayed from the moment the projector is turned on to the moment it is ready for projection. Display settings User screen settings When Ceilingmounted or for Rear Projection Make this setting when the projector is hung from the ceiling or it projects an image on a transmissive screen. Display settings Image flip H/V Projector on An image is projected normally. The factory-captured Canon logo is displayed.
Image Adj. Menu The Image adj. menu is used to make various adjustments to the image to be projected. Selecting an Image Mode [Image mode]........................................... P62 Selecting an Image Mode When the color and brightness of the displayed image can be adjusted to match your source. Adjusting the Brightness [Brightness] ... P63 Adjusting the Contrast [Contrast] ........... P63 Image adj. Adjusting the Sharpness [Sharpness].... P64 Image mode Making a Gamma Correction [Gamma]...
Adjusting the Brightness When the image is too bright or dark, adjust the brightness. Adjusting the Contrast When you want to make the image more or less vivid, adjust the difference in tone between the lightest and darkest portions of the image. Image adj. Image adj. Brightness Contrast > The image becomes brighter. > < The image becomes darker. < This setting is saved for the currently selected input signal and image mode.
Adjusting the Sharpness When you want to make the image sharper or softer, adjust the sharpness of the image. SETTING UP FUNCTIONS USING MENUS 64 Making a Gamma Correction When light or dark portions of an image are obscure, adjust the image. Image adj. Image adj. Sharpness Gamma > The image becomes sharp. < The image becomes soft. • Sharpness can be adjusted in four steps in the plus or minus direction. • This setting is saved for the currently selected input signal and image mode.
Using the Dynamic Gamma Function The tone representation of light and dark areas is adjusted automatically. Adjusting the Color Level When an image is too deep or pale in color, adjust the color level. Image adj. Image Adj. Dynamic Gamma On Off The dynamic gamma function is used. The dynamic gamma function is not used. > The image becomes deeper in color. < The image becomes paler in color. This setting is saved for the currently selected input signal and image mode.
Adjusting the Color Balance When an image appears too red or green, adjust the color balance. Image adj. Color balance SETTING UP FUNCTIONS USING MENUS 66 > The reddish image is corrected. < The greenish image is corrected. • You cannot adjust the color balance when the video format is PAL, PAL-M, PAL-N, or SECAM. • This setting is saved for the currently selected input signal and image mode.
Making Advanced Color Adjustment Adjust colors using the memorized color correction function and 6-axis color adjustment function. Image adj. Performing Progressive Processing When you want to project a high-quality image, use the progressive processing function. Image adj. Advanced color adjustment Progressive No correction Color adjustment is not performed. On Mem. color correct L Colors (e.g., blue sky) in our memory can be adjusted in three steps so that they can be shown more vividly.
Reducing the Lamp Brightness When you want to make the image darker or you feel the fan noisy, reduce the lamp brightness. If you want to make all image settings from the beginning, you can reset the current settings to the factory defaults. Image adj. Image adj. Lamp mode Reset Normal Quiet SETTING UP FUNCTIONS USING MENUS 68 Resetting the Image Settings An image is projected at the normal brightness level. The lamp brightness is reduced to make the fan quieter.
System Settings Menu This menu is used to set various functions of this projector. Outputting an Image to a Monitor You can use the RGB IN-2/COMPONENT IN/RGB OUT terminal as an analog RGB terminal. Outputting an Image to a Monitor [Terminal] ........................................ P69 Selecting the Power Management Mode [Power management mode] .......... P70 System settings Terminal Issuing a Beep [Beep] .............................................. P70 Prohibiting Projector Operation [Key lock] .....
Selecting the Power Management Mode When the projector is not used, the mercury lamp is turned off or the power is turned off automatically for power saving. System settings Power management mode Off Standby SETTING UP FUNCTIONS USING MENUS 70 Exit The power management mode is not used. The projector enters the power management mode. It restarts projection when a signal is input or an operation button is pressed. The projector enters the exit mode, being turned off automatically.
Prohibiting Projector Operation You can prohibit use of the buttons on the top control and remote control to prevent buttons from being pressed by mistake. System settings Key lock Off Main unit Register a password that you need to enter when turning on the projector. System settings Register password The key lock function is not used. Use of the top control is prohibited. Use of the remote control is prohibited.
Setting a Password Set a password in the projector. Once the password is set, you will need to enter the password each time you turn on the projector. When you use two projectors at the same time, change the channel settings to prevent the two remote controls from interfering with each other. System settings System settings Password settings Off On SETTING UP FUNCTIONS USING MENUS 72 Setting up the Remote Control The password function is not used. The password function is used.
Selecting a Display Language You can select a language to be used in the menu from 13 different languages. Resetting to the Factory Defaults You can reset menu item settings. The system settings will be restored to the factory defaults. System settings System settings Language Factory defaults Select a display language.
Resetting the Lamp Counter When you have changed the lamp, reset the lamp counter that indicates the lamp replacement timing. • When the time of use is less than 1,000 hours • When the time of use is 1,000 to 1,400 hours SETTING UP FUNCTIONS USING MENUS 74 The lamp counter is reset. Resetting of the lamp counter is canceled. • When the time of use is 1,400 hours or longer Do not reset the lamp counter except when you have replaced the lamp.
MAINTENANCE Cleaning the Projector Clean the projector frequently to prevent dust from accumulating on the surface. A dirty lens can affect the quality of the projected image. Caution • The main unit is very hot immediately after turning off the projector. Wait until the projector cools down sufficiently before cleaning the projector. You may get burned or injured. • Before cleaning, be sure to remove the power plug from the AC outlet. Otherwise, electric shock or fire may result.
Cleaning and Replacing the Air Filter An air filter is installed in the air intake vent on the bottom of the main body to protect the internal lens and mirror from dust. Should the air filter become clogged with dust, it will block the air flow into the projector and causing an internal heat buildup which may cause a problem. Caution • The main unit is very hot immediately after turning off the projector. Wait until the projector cools down sufficiently before cleaning the air filter.
Replacing the Lamp When the time of use of the lamp is 1400 hours or longer, the following message (two types) is displayed for 10 seconds each time the projector is turned on. • When the time of use is 1,400 to 1,500 hours • When the time of use is 1,500 hours or longer • This message will not appear again, if you select [No] in response to the message "Do you want to display this message again?". • Check the time of use of the lamp in [Lamp counter] from the System settings menu.
Procedure for Replacing the Lamp 1 2 3 4 Turn off the projector and disconnect the power plug from the AC outlet. Allow the projector to cool for a least 1 hour. Detach the lamp cover by loosening a screw with a flathead screwdriver. Loosen two screws, turn up the handle, and remove the lamp. Lamp cover Handle Screw Lamp Insert a new lamp as far as it will go and secure it with two screws. * After installation, be sure to turn down the handle.
TROUBLESHOOTING Understanding the Warning Lamp Flash Patterns When an internal problem occurs, the WARNING lamp on the Control Panel flashes red. When dealing with the problem, turn off the projector, wait until the cooling fan stops, remove the power plug from the AC outlet. Flash Pattern Meaning Countermeasure One flash Abnormal temperature The temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one.
Symptoms and Solutions No power Cause Countermeasure The power cord is not connected prop- Check whether the power cord is connected properly. erly. (P26) The power cord has just been con- After connecting the power plug, you cannot turn on the nected. projector before the [POWER] lights red. (P27) You attempted to turn on the projector The projector cannot be turned on for about 90 seconds immediately after turning it off. after it is turned off.
No sound Cause Countermeasure The audio cable is not connected Check whether the audio cable is connected properly. properly. (P24, 43) The [MUTE] function is selected. Press the [MUTE] button on the remote control. (P40) The volume level is adjusted to the Adjust the [VOL+] button on the remote control or top conminimum. trol to adjust the volume level. (P40) An audio cable with a built-in resistor Use an audio cable without a built-in resistor. is used.
Cannot project image from notebook computer Cause Countermeasure The connection cable is not connected Check whether the connection cable is properly connected properly. to the video terminal of the computer. (P23) The video signal type is incorrect. Check whether the selected signal type is correct. (P28, 84) The external monitor output setting on Turn on the external monitor output on the notebook comthe notebook computer is incorrect. puter.
Cannot operate the remote control Cause Countermeasure Batteries are not installed properly or Check whether batteries are installed properly. If batteries they have run out. are installed properly, replace them with one batteries. (P17) You are operating the remote control Check whether you are operating the remote control within outside the remote control operating the remote control operating range. range.
APPENDIX Computer Signal Types This projector supports signals of the following types. If your computer or AV equipment is compatible with any one of these signal types, the auto PC function of the projector judges the type of the input signal to project an image correctly.
Relationship between Screen Size and Projection Distance Screen size at 4:3 aspect ratio W x D (cm) Zoomed projection distance Min. 182s 370 x 277 190s 386 x 290 - 200s 406 x 305 - 210s 427 x 320 - 220s 447 x 335 - 230s 467 x 351 - 240s 488 x 366 - 250s 508 x 381 - 260s 528 x 396 - 270s 549 x 411 - 280s 569 x 427 - 290s 589 x 442 - 300s 610 x 457 - 1.2 m (3.9c) 1.5 m (4.9c) 1.8 m (5.9c) 2.1 m (6.9c) 2.4 m (7.9c) 2.7 m (8.9c) 3.0 m (9.8c) 3.3 m (10.8c) 3.6 m (11.8c) 3.9 m (12.8c) 4.
Menu Configuration VIDEO/S-VIDEO Factory Defaults Screen settings Normal Wide Screen Switching between Computer and AV Equipment Input signal select Auto NTSC PAL SECAM NTSC4. 43 PAL-M PAL-N Select the input terminal of the equipment from which an image is to be input, and select an input signal type using a button on the remote control or top control.
Image adj.
Glossary Analog RGB A signal system used to send information about R (red), G (green), and B (blue) with analog values. It is a typical system for connecting a color monitor to a computer. Connect the analog RGB output terminal of the computer and the DVI-I/RGB IN-1 terminal or RBG-2/ COMPONENT IN/RGB OUT terminal of this projector with a monitor cable. When the RGB IN-1 terminal is used, select “ANALOG RGB-1” by pressing the [COMPUTER-1] button.
Progressive An image display system used to display the entire screen per scan. When an interlace signal (video signal) that displays one screen by two scans (one for odd lines and one for even lines) is input, progressive processing is required. When the progressive function is turned off, one screen is displayed using image signals per interlace signal, deteriorating the vertical resolution of the image.
Specifications Ω Ω Ω Ω Ω Ω Ω Ω APPENDIX 90 Ω
External View RGB IN-2/COMPONENT IN/RGB OUT (Computer Input, Component Input, and Monitor Input/Output Terminals) This terminal is used as a computer input or monitor output terminal. When used as a monitor output terminal, the computer (analog) signal input to the DVI-I terminal is output. Use a D-sub computer cable. Mini S-sub 15-pin 1 R 9 +5 V power 2 G 10 Ground (Vertical sync.) 3 B 11 Monitor ID0 4 Monitor ID2 12 DDC data 5 Ground (Horizontal sync.) 13 Horizontal sync.
Installing the Lens Cap Install the lens cap in the following manner: Pass the supplied string through the lens cap string hole on the bottom of the projector, and then pass the other end of the string in the hole on the lens cap. Optional Parts • Lamp • Ceiling Attachment • Ceiling Pipe (360 mm / 14.2″) • Ceiling Pipe (550 mm / 21.7″) • Ceiling Pipe (760 mm / 29.9″) • Ceiling Plate • Mac Adapter • DVI Cable Part No.: RS-LP01 Part No.: RS-CL01 Part No.: RS-CL03* Part No.: RS-CL04* Part No.
YT1-1349-000 1004N0.5 © CANON INC. 2004 PRINTED IN JAPAN User s Manual CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA, INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LATIN AMERICA, INC. 703 Waterford Way Suite 400 Miami, Florida 33126 U.S.A. CANON MEXICANA, S. de R.L. de C.V. Boulevard Manuel Avila Camacho, No. 138 PB, Pisos 15, 16 y 17Col. Lomas de Chapultepec, CP 11000, Mexico D.F.
