User's Guide
30
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
4
P Mode
9
Appendix
Index
2) Shoot.
● Press the shutter button all the way
down.
● As the camera shoots, a shutter sound
is played, and in low-light conditions
whenyouhaveraisedtheash,itres
automatically.
● Keep the camera still until the shutter
sound ends.
● After displaying your shot, the camera will
revert to the shooting screen.
Recording Movies
1) Start recording.
● Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
● Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
● Frames displayed around any detected
faces indicate that they are in focus.
● Oncerecordingbegins,takeyournger
othemoviebutton.
2) Resize the subject and recompose
the shot as needed.
● To resize the subject, repeat the
operations in step 3.
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
(
1
)
3
Compose the shot.
● To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle). (A zoom
bar (1) showing the zoom position is
displayed.)
● Tozoominoroutquickly,movethezoom
lever all the way toward [
] (telephoto)
or [ ] (wide angle), and to zoom in
or out slowly, move it just a little in the
desired direction.
4
Shoot.
Shooting Still Images
1) Focus.
● Press the shutter button halfway.
The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus.
● Several AF frames are displayed when
multiple areas are in focus.
● If[Raisetheash]isdisplayed,liftthe
ashwithyourngers.Itwillrewhen
shooting. If you prefer not to use the
ash,pushitdownwithyournger,into
the camera.
(
1
)