User's Guide

79
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
4
P Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
Connecting via NFC When Camera Is in Playback
Mode
● Press the [ ] button to turn the camera
on.
● Touch the smartphone with Camera
Connect installed (
=
77) against the
camera’s N-Mark ( ).
● Press the [
][ ][ ][ ] buttons to choose
an image to send, and then press the [ ]
button. [ ] is displayed.
● To cancel selection, press the [
] button
again. [ ] is no longer displayed.
● Repeat this process to choose additional
images.
● Afteryounishchoosingimages,press
the [
] button.
● Press the [
][ ] buttons to choose [OK],
and then press the [ ] button.
● Press the [
][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
● The images are now sent.
● Ifduringconnectionamessageonthecamerarequestsyouto
enter the nickname, follow step 2 in “Sending Images to an NFC-
Compatible Smartphone” (
=
77) to enter it.
● The camera does not keep a record of smartphones you connect
to via NFC in Playback mode.
● You can preset images to transfer at your desired size (
=
94).
● When using NFC, keep the following points in mind.
- Avoid strong impact between the camera and smartphone.
This may damage the devices.
- Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
togetherinslightlydi󰀨erentpositions.Ifconnectionisnot
established, keep the devices together until the camera screen
is updated.
- Ifyouattemptconnectionwhenthecameraiso󰀨,amessage
may be displayed on the smartphone reminding you to turn on
the camera. If so, turn the camera on and touch the devices
together again.
- Do not place other objects between the camera and
smartphone. Also, note that camera or smartphone covers or
similar accessories may block communication.
● All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 3. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 3.
● Once you have registered a smartphone, you can change privacy
settings for it on the camera (
=
101).
● Connectionsrequirethatamemorycardbeinthecamera.
● You can also change the camera nickname on the screen in
step 2 (
=
78).
● You can also send multiple images at once and change the image
size before sending (
=
94).
● You can send the current image by choosing [Send this image] on
the screen in step 4.
● To disable NFC connections, choose MENU (
=
26) > [ ] tab
>[Wirelesssettings]>[Wi-FiSettings]>[NFC]>[O󰀨].