User's Manual

38
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
2
Reacquire the subject.
● Aim the camera so that the subject enters
the white frame, and then release the
[ ] button.
● The previous magnication is now
restored, so that the area within the white
frame lls the screen again.
● Some shooting information is not displayed while the camera is
zoomed out.
● During movie shooting, the white frame is not displayed if you
press the [
] button. Also note that a changed zoom factor and
camera operating sounds are recorded.
● If you prefer to shoot at the zoom factor of the screen in step 1,
press the shutter button all the way down.
● You can adjust the zoom factor that the camera reverts to when
you release the [
] button by moving the zoom lever to resize
the white frame while you hold the [
] button.
● To adjust the area displayed when the [
] button is pressed,
access MENU (
=
28) ► [ ] tab ► [ Display Area], and
choose one of the three options.
● The zoom factor cannot be changed with the [
] button after
you press the shutter button all the way down in self-timer mode
(
=
41).
● Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change
depending on the zoom range.
- White range: optical zoom range where the image will not
appear grainy.
- Yellow range: digital zoom range where the image is not
noticeably grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear
grainy.
● Because the blue range will not be available at some recording
pixel settings (
=
48), the maximum zoom factor can be
achieved by following step 1.
● To deactivate digital zoom, choose MENU (
=
28) ► [ ] tab
► [Digital Zoom] ► [Off].
Easily Reacquiring Subjects after Manual
Zooming (Framing Assist – Seek)
Still Images Movies
If you lose track of a subject while zoomed in, you can nd it more easily
by temporarily zooming out.
1
Look for the lost subject.
● Press and hold the [ ] button.
● The camera zooms out and displays
a white frame around the area shown
before you pressed the [
] button.