Specifications

4.2 Relation between Settings and Measurement Operation
– 13 –
4.2 Relation between Settings and Measurement Operation
The measurement operation differs according to the combination of measurement mode
and settings selected in SET mode.
The following table shows typical examples of combinations.
Settings
Measurement Operation Use
Measur
ement
Mode
(AUTO/
MANU.
switch
SET Mode
DE-
FAULT
PRINT
AUTO
PRINT
TRANS
FULL
AUTO
FULL
AUTO
/
AUTO
ON ON ON
After measuring both eyes automati-
cally as many times as set, result will
automatically be printed and trans-
ferred.
Then, measurement head returns to the
initial position.
To have the result printed
and transferred automati-
cally after full automatic
measurement.
FULL
AUTO
/
AUTO
OFF OFF ON
Both eyes will automatically be mea-
sured as many times as set.
Result will be transferred by pressing
PRINT switch.
Then, measurement head returns to the
initial position.
To transfer but not print
the result after full auto-
matic measurement.
AUTO
FULL
AUTO
/
AUTO
ON
ON/
OFF
ON
One eye will automatically be measured
once. If you wish to measure the other
eye, press R/L switch and then START
switch.
Result will be printed and transferred
by pressing PRINT switch.
To print and transfer the
result after automatic
measurement.
FULL
AUTO
/
AUTO
OFF
ON/
OFF
ON
One eye will automatically be measured
once. If you wish to measure the other
eye, press R/L switch and then START
switch.
Result will be transferred by pressing
PRINT switch.
To transfer but not print
the result after automatic
measurement.