Specifications

5.1 Preparation
– 16 –
Initial checks inside the instrument start automatically. When the checks are com-
pleted, the measurement head will move and stop at the right eye side (initial posi-
tion).
Measurement screen will appear
Display as shown on the right
will appear when initialization
ends.
See section 3.4 for details on the
display.
Check the settings
Check and change the settings concerning measurement and printing as required
(see sections 4.2, 7.1 and 7.2).
If you want to print a message with the result, enter it (see section 7.3).
Explain about the measurement to the examinee
Explain about the measurement to the examinee so he/she will not be surprised by
a sudden air puff.
By pressing
CLEAR (DEMO) switch for more than two seconds, you can demon-
strate the strength of air puff to the examinee, even without examinee’s eye dis-
played.
Select the eye to be measured
Press R/L switch as required in order to move the measurement head to the side of
the eye to be measured.
The display of the side of the eye will be displayed in reversed image.
2
FULLAUTO(3)
LIMITER OFF
No. 000001
mmHg
STD
[ , , ]
L [ , , ]
30
R
3
4
5