Specifications

Safety Information
(3)
Installation Operation
WARNING
Do not connect the instrument with anything other than specified.
Otherwise, it may result in fire or electric shock.
Also, when other equipment is going to be connected to the instrument using
the connector for interface, be sure to check after connection that leakage cur-
rent is within the tolerable value.
For details, please contact Canon representative or distributor.
Power Supply
WARNING
Only operate the instrument with the type of power supply indicated on the rat-
ing label. Otherwise, it may result in fire or electric shock.
WARNING
Be sure to disconnect/connect the cables as indicated in this manual.
The unit weighs 21 kg, so bear in mind that it may tip over if proper care is not
taken.
Also, do not handle them with wet hands. Otherwise, you may get an electric
shock that may result in death or serious injury.
WARNING
Securely plug in the power cable into the AC outlet.
If contact failure occurs, or if dust or metal object comes in contact with the
exposed metal prong of the plug, fire or electric shock may result.
WARNING
Be sure to hold the plug or connector to disconnect the cable.
If you pull the cable, the core wire may be damaged, resulting in fire or electric
shock.
WARNING
Do not cut or process the cables. Also, do not place anything heavy, including
the instrument on it, step on it, pull it, bend it, or bundle it.
Otherwise, the cable may be damaged, which may result in fire or electric
shock.
WARNING
Do not get the power for more than one instrument from the same AC outlet.
Otherwise, if may result in fire or electric shock.
CAUTION
The instrument is shipped with a grounding type (three-core) power cable.
To reduce the risk of electric shock, always plug the cable into a grounded
power outlet.
CAUTION
To make it easy to disconnect the plug at any time, avoid putting any obstacles
near the outlet.
!
!
!
!
!
!
!
!
!