Specifications

9.1 Installation

– 61 –

Connect the power supply cable to the instrument

Hold the instrument firmly with your hand and securely connect the power supply

cable to the power supply connector on the bottom of the instrument. See section

3.2.

Set up the instrument

Connect the power supply cable to an AC outlet

Place the chin rest paper on the chin rest

See section 8.4.1.

Load the printing

See section 8.4.2.

Customize the settings as required

Turn ON the power and change the settings concerning the measurement as

required. See chapter 7.

If you are using external equipment

Please contact Canon representative or distributor.