Instruction manual

• Use the S-150 S-video Cable to connect the S-video terminal d. Use the
STV-250 Stereo Video Cable, to connect the AUDIO terminals. Connect the
white plug to the white AUDIO terminal 7 (left). Connect the red plug to the
red AUDIO terminal 9 (right). Do not connect the yellow plug.
• Set the TV/VIDEO selector on the television to VIDEO.
• If you are connecting the camera to a VCR, set the input selector on the VCR to
LINE.
You can connect the camera to a TV or VCR in order to play back your
recordings. You will need to attach a power source to the camera (see p. 8).
See your TV or VCR instruction manual for further details.
Mastering
the Basics
22
E
DV
IN/OUT
AV
OUT
S
DC.IN 9.5V
VIDEO
INPUT
AUDIO
L
R
STV-250 Stereo Video Cable
Connections for Playback on a TV Screen
VIDEO
S-VIDEO
INPUT
AUDIO
L
R
S-150 S-video Cable
STV-250 Stereo
Video Cable
DV
IN/OUT
AV
OUT
S
DC.IN 9.5V
If your TV (or VCR) has an S-video input terminal
• Connect the camera using the STV-250 Stereo Video Cable. Connect the white
plug to the white audio terminal 7 (left). Connect the red plug to the red audio
terminal 9 (right). Connect the yellow plug to the yellow video terminal 0.
• Set the TV/VIDEO selector on the television to VIDEO.
• If you are connecting the camera to a VCR, set the input selector on the VCR to
LINE.
Note:
• If you are going to use the TV as a monitor while you are shooting, remember
to keep the TV volume turned down as long as the camera’s audio terminals are
connected. If the sound from the TV speakers is picked up by the microphone,
an unpleasant high-pitched squeal, called feedback, may be produced.
If your TV (or VCR) has audio/video input terminals