Instruction manual

Editing

How to calculate the best adjustment for the “cut-in” and

“cut-out” points

The tape on which you recorded the digital timer in “Setting RECORDER” is

used for calculating the adjustment value.

1. Rewind the tape in the VCR and play back the recorded digital

timer.

• Look at the time the CUT-OUT timer stops and CUT-IN timer starts. These

times are what the CUT-OUT ADJ. and CUT-IN ADJ. settings should be.

• For maximum accuracy, take an average of at least three readings.

• If your VCR has a frame advance function or a jog dial, you can use it to

find the precise starting times more conveniently.

2. Set the CUT-OUT ADJ. and CUT-IN ADJ. settings to the center of

the three readings.

Note:

• The camcorder will remember the cut-in and cut-out adjustment settings until

you change them.