Brochure

Access only for authorized Users:
The MiCard PLUS
Organizaons lock their MFDs to stop unauthorized and uncontrolled usage. By combining a MiCard PLUS
proximity card with uniFLOW, organizaons can enjoy these security benets while sll allowing authorized
users quick and easy access to the MFD. A single swipe of their building access pass or ID card is all that is
required to instantly authencate and enjoy the full power of the Canon MFDs.
Mulple Technologies in
one Reader
Proximity card readers are
not just used to gain access to
mul-funconal devices but
also to buildings, PCs or to pay
for food in restaurants. Dierent
card technologies may be in
use in dierent buildings or
may change as new services are
oered to workers. The MiCard
PLUS reader can read over 35
dierent 125 kHz and 13.56
MHz proximity and contactless
smart cards in the same reader.
Over 35 dierent
Technologies
The MiCard PLUS is 35
card readers in one. The MiCard
PLUS can be congured to read
the specic card type in use
in the organizaon. Common
technologies supported by the
MiCard PLUS reader include
HID® Prox, Indala® (Motorola),
HiTag and CASI-RUSCO® all in
the 125 kHz range. In the 13.56
MHz frequency, the MiCard
PLUS reader can idenfy the
serial number from cards using
technologies such as HID iCLASS
and MIFARE.
Simultaneous Card
Reading
In addion to reading
more than 35 dierent card
types, the MiCard PLUS reader
can be congured to read two
dierent cards, regardless of the
technology or frequency. This
allows companies with more
than one technology in use in
their organizaon to provide all
users with access to the devices
without having to distribute
mulple cards or aaching RFID
sckers to exisng cards.