Service manual

5
5
5-3
5-3
Maintenance > Maintenance > Adjustment > Margin Adjustment
Maintenance > Maintenance > Adjustment > Margin Adjustment
2)
Pull out the cassette.
3) Check the 2 scale positions on the adjusting plates.
4) Loosen the 3 xing screws.
5) Move the adjusting plates back and forth by referring the scale checked in the step 2. As
moving the adjusting plate toward the rear by 1 scale, the left edge margin becomes 1mm
smaller.
MEMO:
When moving the scale, be sure that the amount of the value to be moved are the same
for the 2 points.
6) Tighten the xing screw.
7) Return the cassette to its original position.
MEMO:
When the cassette positions are uneven due to the mechanical adjustment, adjust them
by loosening the screw at left side.
8) Make copies using the Cassette 3 and 4, and check that the left edge margin is 2.5±1.5mm.
F-5-2F-5-2
F-5-3F-5-3