User Manual
Access only for authorized Users:
The MiCard PLUS
Organizaons lock their MFDs to stop unauthorized and uncontrolled usage. By combining a MiCard PLUS
proximity card with uniFLOW, organizaons can enjoy these security benets while sll allowing authorized
users quick and easy access to the MFD. A single swipe of their building access pass or ID card is all that is
required to instantly authencate and enjoy the full power of the Canon MFDs.
Mulple Technologies in
one Reader
Proximity card readers are
not just used to gain access to
mul-funconal devices but
also to buildings, PCs or to pay
for food in restaurants. Dierent
card technologies may be in
use in dierent buildings or
may change as new services are
oered to workers. The MiCard
PLUS reader can read over 35
dierent 125 kHz and 13.56
MHz proximity and contactless
smart cards in the same reader.
Over 35 dierent
Technologies
The MiCard PLUS is 35
card readers in one. The MiCard
PLUS can be congured to read
the specic card type in use
in the organizaon. Common
technologies supported by the
MiCard PLUS reader include
HID® Prox, Indala® (Motorola),
HiTag and CASI-RUSCO® all in
the 125 kHz range. In the 13.56
MHz frequency, the MiCard
PLUS reader can idenfy the
serial number from cards using
technologies such as HID iCLASS
and MIFARE.
Simultaneous Card
Reading
In addion to reading
more than 35 dierent card
types, the MiCard PLUS reader
can be congured to read two
dierent cards, regardless of the
technology or frequency. This
allows companies with more
than one technology in use in
their organizaon to provide all
users with access to the devices
without having to distribute
mulple cards or aaching RFID
sckers to exisng cards.