Safety guide varioPRINT DP line
Copyright and Trademarks Copyright Copyright 2016 Océ. Illustrations and specifications do not necessarily apply to products and services offered in each local market. No part of this publication may be reproduced, copied, adapted or transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, optical, chemical, manual, or otherwise, without the prior written permission of Océ.
Contents Contents Chapter 1 Safety information..............................................................................................................5 Safety information (all countries)................................................................................................................... 6 Chapter 2 Regulation notices............................................................................................................ 13 Regulation notices..........................................
Contents 4
Chapter 1 Safety information
Safety information (all countries) Safety information (all countries) Important Safety and Environment User Information Before using Your printing system, make sure that it is properly installed and that You have read and understand the User Documentation in order to operate the system safely and in accordance with its functional offerings. When using Your machine make sure to always comply with the User Documentation.
Safety information (all countries) WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings. CAUTION Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions. IMPORTANT Indicates operational requirements and restrictions.
Safety information (all countries) Disassemble and modification WARNING • Do not remove covers and panels which are fixed to the machine. Some machines have a high-voltage component or a laser beam source inside that could cause an electrical shock or blindness. • Do not modify this machine, because this could cause a fire, electrical shock or breakdown. If the machine contains a laser, the laser beam source could cause blindness.
Safety information (all countries) NOTE • If connection to a different mains voltage is required, contact your authorized service representative. Power plug WARNING • For machines that are connected via a wall socket: Place the machine close to a wall socket that is easily accessible. The power plug is intended to serve as a disconnect device. Grounding WARNING • Connect the power cord to an electrical outlet (wall socket) that is equipped with a grounding terminal.
Safety information (all countries) Actions in response to troubles WARNING • When a piece of metal, water or any other similar foreign matter gets inside the machine, immediately turn OFF the power switch and unplug the power cord from the power outlet. Then call your authorized service representative. • Immediately stop using the machine if the machine becomes excessively hot, emits smoke, or produces unusual odors or noises.
Safety information (all countries) Moving the machine WARNING • Make sure that you disconnect the power cord and other cables before you move the machine. • Make sure that you check the documentation for the correct machine location before you move the machine. • Make sure that whenever the machine is moved, this is done by properly qualified people who have received adequate instructions.
Safety information (all countries) 12 Chapter 1 - Safety information
Chapter 2 Regulation notices
Regulation notices Regulation notices Grounding (Finland; FI, Norway; NO, Sweden; SE and Denmark; DK) • • • • FI: Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan. NO: Apparatet må tilkoples jordet stikkontact. SE: Apparaten skall anslutas till jordat uttag. DK: Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord. Translation: The machine must be connected to a grounded power outlet.
Regulation notices Translation: This is a Class A product based on the standard of the VCCI Council. If this equipment is used in a domestic environment, radio interference may occur. In such cases, the user may be required to take corrective action.
Regulation notices should be removed only by skilled service technicians who are aware of the removal instructions provided by Canon. Button cell location Button Cell Capacity [Ah] Contains the following sub‐ stances (if applicable) Controller 0.2 Ah Lithium CAUTION Canon does not accept any liability for any damage or consequences, if the batteries are removed by persons other than Canon service personnel.
Regulation notices End of Life; WEEE (India) • This product is not to be disposed of with your household waste, according to the E-Waste (Management) Rules, 2016. This product should be handed over to a designated collection point, e.g. to an authorized collection site for recycling waste electrical and electronic equipment (EEE).
Regulation notices For the statement on Canon Marketing Vietnam website, please see the last paragraph on the web page of the following URL: "http://www.canon.com.vn/personal/web/company/about". ENERGY STAR® (all countries) • Canon has joined the ENERGY STAR® Program of the United States Environmental Protection Agency (EPA). The purpose of the ENERGY STAR® program is to promote the manufacturing and marketing of energy-efficient equipment, thereby potentially reducing combustion-related pollution.
Regulation notices Standby Power (Federal Energy Management Program) (all countries) • This product meets the following criteria for the United States Federal Energy Management Program (FEMP): In Standby this product consumes < 1 W. After shutting down all systems properly, the Standby-mode as defined by FEMP is reached by switching the Main Switch to "0". This product has a hard-off switch. This product meets the ENERGY STAR® Guidelines for energy efficiency.
Regulation notices 20 Chapter 2 - Regulation notices
Chapter 3 General information
General information General information Caution labels and notations (all countries) • The power-marking label is located near the mains entrance. If connection to a different mains voltage is required, contact Customer Service. • Do not remove caution labels or caution notations. If a label or notation is soiled, please clean the label or notation. If you cannot make label or notation legible, or if the label or notation is damaged, please contact your service representative.
Chapter 4 Miscellaneous
Online support for your product Online support for your product Downloads: User guides, printer drivers and other resources can change without prior notice. To stay up-todate, you are advised to download the latest resources from: "http://downloads.oce.com" Before you use your product, you must always download the latest safety information for your product: make sure that you read and understand all safety information in the manual entitled 'Safety Guide' .
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. CANON CANADA INC. 8000 Mississauga Road Brampton, ON L6Y 5Z7, Canada CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON AUSTRALIA PTY. LTD Building A, The Park Estate, 5 Talavera Road, Macquarie Park, NSW 2113, Australia CANON CHINA CO., LTD 2F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China CANON SINGAPORE PTE.
