VB-C300 Start Guide Manual

2-2

Setup Workflow

The flow for setting up the camera and view the camera video involves; connecting the camera

with the PC over the network via a HUB and perform the initial settings. Installing the necessary

software on the PC, and checking to see if you can see video from the camera. Mounting the

camera, and the reboot.

Supplied Setup CD-ROM

1 Connect the camera to the network and perform the initial setting

Connect the camera to the PC via a HUB (→ P.2-4).

Please ask our sales person when using the PoE HUB and Midspan.

Use a shielded twisted-pair (STP) cable conforming to the EMC standard as the LAN cable.

Insert the supplied Setup CD-ROM into your PC and perform the initial setting (→ P.2-7).

LAN cable

VB-C300

HUB

Install the software and view the camera video

Install the necessary software (→ P.2-11).