VB-C300 Start Guide Manual

3-4

External Device I/O Terminals

The camera has two input and one output terminals for the external devices.

 External Device Input Terminals (IN1, IN2)

The external device input terminals consist of two pairs of terminals (IN1, IN2). The - terminal is

grounded on the inside of the main unit. By connecting 2 cables to the + and - terminals and then

electrically short-circuiting across the terminals (ON) or separating the connection (OFF), an

interrupt can be generated for the NC Viewer.

I/O Terminals

There are External Device I/O, Audio I/O, Video out (for maintenance) and Network terminals on

the back of the camera.

DC IN 12-13V

AC IN 24V

OUT IN

2 IN

* You can check the external input status and operate external output using the NC viewer.

Note

Connect any sensors or switches to terminals with electrically separate GND terminals

and power supplies.