VB-C50FSi/VB-C50Fi User's Manual

1-10
MAC address
The MAC address is required
when setting the IP address
and making other network
settings. Please make a note
of it before installing this unit
(→ P.2-9).
Reset switch
You can revert all settings of
the unit to the factory default
settings by pressing this
button with a thin-tipped
object while turning on the
power switch, and keeping
the button pressed for more
than five seconds after turning
on (→ P.7-22).
Serial No.
The serial number for
this unit is shown here.
System Components and Their Operation
00008501F162
Rear
On the rear of the VB-C50FSi/VB-C50Fi there are the MAC address required for network settings,
a Reset switch that returns the factory default settings and the serial number.
Power connection
socket
Multi-connector
You can connect the
Multi-Terminal Module
VB-EX50 to the VB-
C50FSi/VB-C50Fi via
the connector (→ P.1-
11).
100/10 BT Ethernet connector
(100Base-TX, 10Base-T Auto-Negotiation)
On the VB-C50FSi, this can also be used to
connect to a PoE hub or midspan.
* The connector is oriented differently on the
VB-C50Fi.
Screw hole for tripod
mounting
Bottom
Screw hole for arm mounting
Model Name
VB-C50FSi VB-C50Fi
NTSC VB-C50FSiN VB-C50FiN
PAL VB-C50FSiP VB-C50FiP
COPY