VB-C50FSi User Manual
2-6
2. Connect the Camera to the Network
Next, connect the camera. Connect the camera to the network by connecting the camera and PC
via the hub with a LAN cable .
* Do not plug the AC cable power
plug into the wall socket yet.
PC
Hub
LAN
cable
AC cable
AC adapter
(Rear of main unit)
00008501F162
Note
● Use only approved PoE hubs or midspans.
See our WebView Product web page http://www.canon.com/webview for details.
● For information on how to use the PoE hub or midspan, refer to the user's manual
supplied with the hub.
● The LAN cable used to connect the VB-C50FSi to a PoE hub should be no more
than 100 meters long.
The VB-C50FSi is equipped with a PoE (Power over Ethernet) function. This allows power to be
supplied to the camera from an IEEE 802.3af-compliant PoE hub or midspan via a LAN cable.
PC
LAN
cable
PoE hub
(Rear of main unit)
00008501F162