Setup guide

1-17
Setting the Camera Control and External Device Name (Camera)
1
1
Detailed Settings
Tip
z Auto focus may not work properly with the following subjects:
z The focus ranges (rough guide) are shown in the table below according to the settings of
[Day/Night], etc.
z When it is difficult to focus on a night view or other subject having no contrasting bright/
dark areas, it is best to set the focus mode to "Fixed at infinity."
A white wall or other subject
having no contrasting
bright/dark areas
A slanting subject A subject reflecting
strong light
A subject consisting
only of slant lines or
horizontal stripes
A subject having no
form, such as flame
or smoke
A subject seen
through glass
A fast-moving
subject
A dark area or night
view
A subject that is
simultaneously far and
near
Point of infinity
Note) The camera may be out of focus.
Day/Night setting Day mode Night mode
Dome
Infrared lamp Wide end Tele end Wide end Tele end
Auto
Not used None
0.3m~∞ 1.5m~∞ 0.5m~∞ 1.8m~∞
Used None 2.1m~∞ 2.4m~∞
Not used Yes 0.5m~∞ 1.8m~∞
Used Yes 0.5m~∞ 2.4m~∞
Fixed at infinity
None Point of infinity
Ye s
COPY